BP2335 DIP

The DS8921 device are differential line driver and receiver pairs designed specifically for applications meeting the ST506, ST412, and ESDI disk drive standards. In addition, these devices meet the requirements of the EIA standard RS-422.

The MAX7219/MAX7221 are compact, serial input/output common-cathode display drivers that interface microprocessors (?Ps) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs.

Nearly any Liquid Crystal Display (LCD)1 with modest multiplex rates may be interfaced with the PCF85162 peripheral device. Any static or multiplexed LCD with up to four backplanes and up to 32 segments can have its driving signals generated by this device. For bigger LCD applications, it is simply cascaded. The two-line bidirectional I2 C-bus is used by the PCF85162 for communication with the majority of microcontrollers. A display RAM with auto-incremented addressing, hardware sub addressing, and display memory switching (static and duplex drive modes) all reduce communication overheads. Features LCD controller and driver on a single chip Selectable display bias configuration: static, 12, or 13; Internal LCD bias generation with voltage-follower buffers; Selectable backplane drive configuration: static, 2, 3, or 4 backplane multiplexing; 32 segment drives: Up to 8 14-segment alphanumeric characters, up to 16 7-segment numeric characters, and up to 128 components of any image For storing display data, use 32 bits of RAM. Flexible flashing modes; switching between display memory banks in static and duplex driving modes; and independent supply for LCD and logic voltage Broad power supply range: 1.8 to 5.5 volts

The ULN2003 is high-voltage, high-current Darlington arrays each containing seven open collector Darlington pairs with common emitters. Each channel is rated at 500 mA and can withstand peak currents of 600 mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout.