CP2102 IC
₹130.00
CP2102 IC USB to UART Bridge provides a complete plug-and-play interface solution that includes royalty-free drivers. This USB 2.0 compliant device includes 0 digital I/O pins and is available in a 5×5 mm ?QFN28 package.
Specifications:-CP2102 IC
| Parameter | Min | Max | Unit |
| Ambient Temperature under Bias TBIAS | -55 | 125 | ?C |
| Storage Temperature TSTG | -65 | 150 | ?C |
| Voltage on VDD with respect to GND VDD | -0.3 | 4.2 | V |
| Maximum Total Current through VDD and GND | – | 500 | mA |
| Maximum Output Current sunk by RST or any I/O pin | – | 100 | mA |
Description
CP2102-IC is a highly integrated USB to UART Bridge Controller providing a simple solution for updating RS-232 designs to USB using a minimum of components and PCB space. The CP2102-GM includes a USB 2.0 full-speed function controller, USB transceiver, oscillator, EEPROM, and asynchronous serial data bus (UART) with full modem control signals. No other external USB components are required. The on-chip EEPROM may be used to customize the USB Vendor ID, Product ID, Product Description String, Power Descriptor, Device Release Number, and Device Serial Number as desired for OEM applications. The EEPROM is programmed on board via the USB, allowing the programming step to be easily integrated into the product manufacturing and testing process.
- Integrated USB transceiver; no external resistors required
- Integrated clock; no external crystal required
- Integrated 1024 Byte EEPROM
- On-chip power-on reset circuit
- On-chip voltage regulator: 3.3V output
- USB Specification 2.0 compliant; full-speed (12 Mbps)
- USB suspend states supported via SUSPEND pins
- All handshaking and modem interface signals
- Baud rates: 300 bps to 1 Mbits
- 576 Byte receive buffer; 640 byte transmit buffer
- Hardware or X-On/X-Off handshaking supported
- Event character support
- Line break transmission
Applications
Communications & Networking, Consumer Electronics, Aerospace, Defence, Military, Multimedia
Features:- CP2102 IC
- Integrated USB transceiver; no external resistors required
- Integrated clock; no external crystal required
- Internal 1024-byte programmable ROM for vendor ID, product ID, serial number, power descriptor, release
- number, and product description strings
- On-chip power-on reset circuit
- On-chip voltage regulator – 3.3 V output (CP2102)
Specifications:- CP2102 IC
- Parameter Min Max Unit
- Ambient Temperature under Bias TBIAS -55 125 ?C
- Storage Temperature TSTG -65 150 ?C
- The voltage on VDD with respect to GND VDD -0.3 4.2 V
- Maximum Total Current through VDD and GND – 500 mA
- Maximum Output Current sunk by RST or any I/O pin – 100 mA
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
BD6221F-E2
Basic Information
Full bridge drivers, or H-bridges, are what are used in brush motor applications. Each IC has an operating voltage range of 6V to 15V and a maximum output current of 2A. The output stage's MOS transistors enable PWM speed control. Motor driver ICs that have been discontinued can be directly replaced thanks to the inbuilt VREF voltage control mechanism. Low-power consumption designs are made possible by these incredibly efficient H-bridge driver ICs.
Features
Built-in Selectable Features Cross-Conduction Prevention Circuit, OCP, OVP, TSD, and UVLO Protection Circuits, One Channel or Two Channels Configuration, VREF Voltage Setting Pin Enables PWM Duty Control, and One or Two Channels Configuration.
Key Particulars
Maximum Output Current: 0.5A, 1.0A, 2.0A;
Output ON-Resistance: 1.5;
PWM Input Frequency Range: 20kHz to 100kHz;
Standby Current: 0A;
Supply Voltage Range: 18V(Max); (Typ)
-40?C to 85?C is the operating temperature range.
Applications
VTR, CD/DVD players, audiovisual gear, optical disc drives, PC add-ons, and OA equipment
MCP2510 CAN Controller Interface IC DIP-18 Package
The Microchip Technology Inc. MCP2510 is a Full Controller Area Network (CAN) protocol controller implementing CAN specification V2.0 A/B. It supports CAN 1.2, CAN 2.0A, CAN 2.0B Passive, and CAN 2.0B Active versions of the protocol, and is capable of transmitting and receiving standard and extended messages.
MT8870
The MT8870D/MT8870D-1 is a comprehensive DTMF receiver that incorporates both the band split filter and the digital decoder features. For high and low group filters, switched capacitor techniques are used; for decoding, digital counting techniques are used to identify and decode all 16 DTMF tone-pairs into a 4-bit code. The on-chip supply of a differential input amplifier, clock oscillator, and latched three-state bus interface reduces the number of external components.
PCF85163D
Nearly any Liquid Crystal Display (LCD)1 with modest multiplex rates may be interfaced with the PCF85162 peripheral device. Any static or multiplexed LCD with up to four backplanes and up to 32 segments can have its driving signals generated by this device. For bigger LCD applications, it is simply cascaded. The two-line bidirectional I2 C-bus is used by the PCF85162 for communication with the majority of microcontrollers. A display RAM with auto-incremented addressing, hardware sub addressing, and display memory switching (static and duplex drive modes) all reduce communication overheads.
Features
LCD controller and driver on a single chip
Selectable display bias configuration: static, 12, or 13; Internal LCD bias generation with voltage-follower buffers; Selectable backplane drive configuration: static, 2, 3, or 4 backplane multiplexing; 32 segment drives:
Up to 8 14-segment alphanumeric characters, up to 16 7-segment numeric characters, and up to 128 components of any image
For storing display data, use 32 bits of RAM.
Flexible flashing modes; switching between display memory banks in static and duplex driving modes; and independent supply for LCD and logic voltage
Broad power supply range: 1.8 to 5.5 volts
