MCP2200 USB 2.0 to UART Protocol Converter with GPIO
MCP2200-I/SO
The MCP2200 is a USB-to-UART serial converter that allows USB connection to be used in applications using a UART interface. The USB termination resistors are integrated within the device, which decreases the number of external components. The MCP2200 additionally includes a 256-byte integrated user EEPROM. Eight general-purpose input/output pins are available on the MCP2200. Four pins serve as alternate indicators of USB and communication status.
The MCP2200's control module is its beating heart. The control module connects and controls all of the other modules. The control module is in charge of transferring data between the USB and the UART, and also instruction requests from the USB host controller and commands for operating the UART and I/O functions.
MCP23017 16-Bit Input/Output Expander with I2C Interface IC DIP-28 Package
The MCP23017 device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface:?MCP23017 ? I2C interface??The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection.
MCP23S17 16-Bit Input/Output Expander with I2C Interface IC DIP-18 Package
The MCP23S17 device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface:?MCP23S17 ? SPI interface??The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection.
MCP2510 CAN Controller
The MCP2510 provides immediate CAN support across the entire breadth of Microchip?s 100 PICmicro? microcontrollers, providing a seamless migration path and maximum design flexibility for CAN designs. The?MCP2510 CAN Controller?contains on-board features, such as interrupt capability, message masking and filtering, message prioritization, multi-purpose I/O pins, and multiple transmit/receive buffers which significantly offload the microcontroller overhead required to handle CAN message traffic. Applications for the MCP2510 include motor control, smoke detectors, CO detectors, sensors, meters, automotive electronics, climate control and instrument clusters.
MCP2510 CAN Controller Interface IC DIP-18 Package
The Microchip Technology Inc. MCP2510 is a Full Controller Area Network (CAN) protocol controller implementing CAN specification V2.0 A/B. It supports CAN 1.2, CAN 2.0A, CAN 2.0B Passive, and CAN 2.0B Active versions of the protocol, and is capable of transmitting and receiving standard and extended messages.
MCP2515
Microchip Technology?s MCP2515 is a stand-alone
Controller Area Network (CAN) controller that implements the CAN specification, Version 2.0B. It is capable
of transmitting and receiving both standard and
extended data and remote frames. The MCP2515 has
two acceptance masks and six acceptance filters that
are used to filter out unwanted messages, thereby
reducing the host MCU?s overhead. The MCP2515
interfaces with microcontrollers (MCUs) via an industry
standard Serial Peripheral Interface (SPI).
MCP2515 CAN CONTROLLER
Microchip Technology?s MCP2515 is a stand-alone?Controller Area Network (CAN) controller that?implements the CAN specification, version 2.0B. It is?capable of transmitting and receiving both standard?and extended data and remote frames. The MCP2515?has two acceptance masks and six acceptance filters?that are used to filter out unwanted messages, thereby?reducing the host MCU?s overhead. The MCP2515 CAN Controller?interfaces with microcontrollers (MCUs) via an industry?standard Serial Peripheral Interface (SPI).
MCP2515 CAN Controller Interface IC DIP-18 Package
MCP2551
Microchip Technology?s MCP2515 is a stand-alone
Controller Area Network (CAN) controller that implements the CAN specification, Version 2.0B. It is capable
of transmitting and receiving both standard and
extended data and remote frames. The MCP2515 has
two acceptance masks and six acceptance filters that
are used to filter out unwanted messages, thereby
reducing the host MCU?s overhead. The MCP2515
interfaces with microcontrollers (MCUs) via an industry
standard Serial Peripheral Interface (SPI).
