L30960-N5130-B100
Features? of? L30960-N5130-B100
- LTE (2x2 DL-MIMO; FDD 3GPP Release 9)
- 3GPP Release 8; UMTS/HSPA (FDD); Rx diversity
- 3GPP Release 6; DARP/SAIC; GSM/GPRS/EDGE
- SIM Application Toolkit, version 99 of the 3GPP
- Using AT instructions to control (Hayes, TS 27.007, TS 27.005)
- 3.3 to 4.2 V supply voltage range, especially tuned for low power usage
- Size: 40, 32, and 2,8 mm
- Range of Operation Temperature: -40 ?C to +95 ?
- Compliant with RoHS, RED, and REACH, EuP assistance
- The USB 2.0/3.0 interface provides several composite modes and a mode that is compatible with Linux and Mac.
- USB-based firmware update
L4970A
The L4970A is a stepdown monolithic power
switching regulator delivering 10A at a voltage
variable from 5.1 to 40V.
Realized with BCD mixed technology, the device
uses a DMOS output transistor to obtain very high
efficiency and very fast switching times. Features
of the L4970A include reset and power fail for microprocessors, feed forward line regulation, soft
start, limiting current and thermal protection. The
device is mounted in a 15-lead multiwatt plastic
power package and requires few external components. Efficient operation at switching frequencies
up to 500KHz allows reduction in the size and
cost of external filter components.
L4978D
The L4978 is a step down monolithic power
switching regulator delivering 2A at a voltage between 3.3V and 50V (selected by a simple external
divider). Realized in BCD mixed technology, the
device uses an internal power D-MOS transistor
(with a typical Rdson of 0.25?) to obtain very high
efficency and high switching speed
L6201
The I.C. is a full bridge driver for motor control applications realized in Multipower-BCD technology
which combines isolated DMOS power transistors
with CMOS and Bipolar circuits on the same chip.
By using mixed technology it has been possible to
optimize the logic circuitry and the power stage to
achieve the best possible performance. The
DMOS output transistors can operate at supply
voltages up to 42V and efficiently at high switching speeds. All the logic inputs are TTL, CMOS
and ?C compatible. Each channel (half-bridge) of
the device is controlled by a separate logic input,
while a common enable controls both channels.
The I.C. is mounted in three different packages.
L6203
The I.C. is a full bridge driver for motor control applications realized in Multipower-BCD technology
which combines isolated DMOS power transistors
with CMOS and Bipolar circuits on the same chip.
By using mixed technology it has been possible to
optimize the logic circuitry and the power stage to
achieve the best possible performance. The
DMOS output transistors can operate at supply
voltages up to 42V and efficiently at high switching speeds. All the logic inputs are TTL, CMOS
and ?C compatible. Each channel (half-bridge) of
the device is controlled by a separate logic input,
while a common enable controls both channels.
The I.C. is mounted in three different packages.
L6207PD
The L6207 device is a DMOS dual full bridge
designed for motor control applications, realized
in BCD technology, which combines isolated
DMOS power transistors with CMOS and bipolar
circuits on the same chip. The device also
includes two independent constant off time PWM
current controllers that perform the chopping
regulation. Available in PowerSO36 and SO24
(20 2 2) packages, the L6207 device features
a non-dissipative overcurrent protection on the
high-side Power MOSFETs and thermal
shutdown.
L6219 Stepper Motor Driver IC DIP-24 Package
L6384D
The L6384 is a high-voltage device that utilizes BCD's "OFF-LINE" technology. It is equipped with a Half-Bridge Driver structure that allows it to drive N Channel Power MOS or IGBTs. The upper (floating) section can handle voltage rails up to 600V. For simplicity of connecting with controlling devices, the Logic Inputs are CMOS/TTL compatible. High-frequency functioning is made easier by matched delays between the Lower and Up-per Sections. With the help of an external resistor, you may easily set the dead time.
Features
HIGH VOLTAGE RAIL UP TO 600 V
dV/dt IMMUNITY - 50 V/n sec IN FULL TEMPERATURE RANGE
DRIVER CURRENT CAPABILITY: 400 mA SOURCE,650 mA SINK
SWITCHING TIMES 50/30 nsec RISE/FALLWITH 1nF LOAD
CMOS/TTL SCHMITT TRIGGER INPUT SWITH HYSTERESIS AND PULL DOWN
SHUT DOWN INPUT
DEAD TIME SETTING
UNDER VOLTAGE LOCK OUT
INTEGRATED BOOTSTRAP DIODE
CLAMPING ON Vcc
SO8/MINIDIP PACKAGES
