Showing 2029–2040 of 3972 results

IXTH50N20

764.00
International standard packages l Low RDS (on) HDMOSTM process l Rugged polysilicon gate cell structure l Low package inductance (< 5 nH) - easy to drive and to protect l Fast switching times Applications l Switch-mode and resonant-mode power supplies l Motor controls l Uninterruptible Power Supplies (UPS) l DC choppers

J111

37.00
? This Device is Designed for Low Level Analog Switching, Sample and Hold Circuits and Chopper Stabilized Amplifiers ? Sourced from Process 51 ? Source & Drain are Interchangeable ? These are Pb?Free Devices

JHD 16Ɨ2 Character LCD Display

170.00
  1. Model: JHD659 Y/YG
  2. Display: 16Ɨ2 character
  3. Outline: 80.0Ɨ36.0x14.5
  4. VA: 64.5Ɨ14.5
  5. Controller: SPLC780D
  6. Character: 2.95Ɨ4.35
  7. Driver: 1/16

K10104DTLD

The K1010 series consists of a phototransistor detector optically connected to an infrared emitting diode. They come in a 4-pin DIP format with a large lead spacing and an SMD variant. Features
1.Current transfer ratio (CTR:50% minimum at IF=5mA VCE=5V) 2.Viso:5000Vrms isolation voltage between input and output 3.RoHS-compliant and Pb-free 4.MSL level 1 5.Approvals from the agencies ?c-UL Approved (No. E169586): UL1577 ?UL Approved (No. E169586): UL1577 (No. E169586) ?VDE Approved: DIN EN60747-5-5 (No.101347) ?SEMKO Approved: EN60065, EN60950, EN60335 ?CQC Approved: GB8898-2011, GB4943.1-2011 ?FIMKO Approved: EN60065, EN60950, EN60335
Applications ?System appliances ?Measuring instruments ?Computer terminals ?Programmable controllers ?Medical instruments ?Physical and chemical equipment ?Signal transmission between circuits of different potentials and impedances

K6X0808C1D-GF55

106.00
Access time: 25 ns, 45 ns ? Low active power: 200 mW (typical) ? Low standby power ? 150 ?W (typical) CMOS standby ? 15 mW (typical) operating ? Fully static operation: no clock or refresh required ? TTL compatible inputs and outputs ? Single 5V power supply ? Lead-free available ? Industrial and Automotive temperatures available

KA431AZ – Programmable Shunt Regulator

13.50
The KA431A are three-terminal adjustable regulator series with a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between VREF (approximately 2.5 volts) and 36 volts with two external resistors These devices have a typical dynamic output impedance of 0.2W Active output circuitry provides a very sharp turn on characteristic, making these devices excellent replacement for zener diodes in many applications.

KBPC110

121.00
The VS-KBPC series of single phase rectifier bridge consists of four silicon junctions connected as a full bridge. These devices are intended for general use in industrial and consumer equipment.