SKY13323-378LF

Benefits and features of BGU7005

• Covers the entire GNSS L1 range, 1559 to 1610 MHz
• Noise figure (NF) is equal to 0.85 dB.
• Increase 16.5 dB
• A lot of input Pi(1dB), or 1 dB compression point, is 11 dBm.
• High IP3i out of band of 9 dBm
• 1.5 to 3.1 volts is the supply voltage.
• Consumption of current in power-saving mode is 1 A.
• Optimized performance at 4.5 mA, a low supply current
• Output matching that is integrated
• Only needs one supply decoupling capacitor and one input matching inductor.
• Decoupled DC input and output
• All pins have ESD protection (HBM > 2 kV).
• Temperature-stabilized bias included for simple design
• Small leadless 6-pin package 1.45 mm, 1 mm, and 0.5 mm
• Transit frequency of 110 GHz using SiGe:C technology

Application of CC2640F128RSM

• Building and Home Automation-Appliances That Are Connected -Lights -Locks -The Gateways -Systems for Security
• Industrial- Supply chain - Manufacturing and Production - Robotics - Asset Management and Tracking - Wireless Display - Replacement of cables ? HMI - Access Management
• Retail-The beacons - Promotion - Price Tags and ESL - Payment and Point of Sale Systems
• Medical and Health-Temperature gauges - SpO2 - Blood pressure and glucose metres - Weighbridges - Vitals Tracking - Aids to hearing
• Exercise and Sports-Fitness trackers and activity monitors -Monitors for Heart Rate -Operating Sensors -Bicycle Sensors -Watches for sports - Fitness Gear - Gear for team sports
• Accessories-Toys -Followers -Tags for bags -Smartwatches

  Features of CC2640F128RSM

• Microcontroller-Strong ARM? Cortex? -M3 - 142 for EEMBC CoreMark? - Maximum Clock Speed of 48 MHz - 128 KB of programmable in-system flash - Cache: 8KB of SRAM - 20KB of SRAM with ultra-low leakage. - JTAG and 2-Pin cJTAG Debugging - Facilitates Over-The-Air Upgrade (OTA)
• Sensor Controller with Ultralow Power- Can Operate Independently of the Rest of the System -16-Bit architecture - 2KB of SRAM with extremely minimal leakage for code and data.
• Peripherals- Any GPIO Can Be Used to Route All Digital Peripheral Pins - Four modules for general-purpose timers. - 200 ksamples/s, 8-Channel Analog MUX, 12-Bit ADC - Comparator for Continuous Time - Ultralow-Power Analog Comparer -Modifiable Current Source - Clock in Real Time (RTC) - Security Module AES-128 -The TRNG (True Random Number Generator) (TRNG) - Depending on the package option, 10, 15, or 31 GPIOs - Eight capacitive-sensing buttons are supported. - Temperature sensor built-in

HT12D is a decoder integrated circuit that belongs to 212 series of decoders. This series of decoders are mainly used for remote control system applications, like burglar alarm, car door controller, security system etc. It is mainly provided to interface RF and infrared circuits.? They are paired with 212 series of encoders. The chosen pair of encoder/decoder should have same number of addresses and data format.In simple terms, HT12D converts the serial input into parallel outputs. It decodes the serial addresses and data received by, say, an RF receiver, into parallel data and sends them to output data pins. The serial input data is compared with the local addresses three times continuously. The input data code is decoded when no error or unmatched codes are found. A valid transmission in indicated by a high signal at VT pin. HT12D is capable of decoding 12 bits, of which 8 are address bits and 4 are data bits. The data on 4 bit latch type output pins remain unchanged until new is received. Datasheet of ht12d decoder ic

PN553A1EV/C102Y