PN553A1EV/C102Y

Features of CC2592

• LNA Gain Digitally Controlled via an HGM Terminal  
• (LNA EN = PA EN = 0) 100 nA in Power Down  
• Little Transmit Current Use -PAE = 34% at -155 mA at 3 V for +22 dBm  
• Low Receiving Current Intake -For High-Gain Mode, use -4.0 mA -For Low-Gain Mode, -1.9 mA  
• T/R Switch and External Antenna Match Included in the 4.7-dB LNA Noise Figure  
• Conforms to RoHS QFN-16 Package, 4-mm by 4-mm  
• Operation from 2.0-V to 3.7-V  
• Operating Range: -40?C to +125?C
• Texas Instruments' Seamless Interface to 2.4-GHz Low-Power RF Devices  
• Power Output: +22 dBm  
• Improved Sensitivity of 3 dB Typically on CC2520, CC253X, and CC85XX  
• Almost No External Components -Switches that are built-in -Network for Integrated Matching -Balun integrated -Integral Inductors -Integration of PA -LNA integrated

  Applications? of CC2592  

• Every 2.4-GHz ISM Band Device
• Gateways for ZigBee and IEEE 802.15.4
• Sensor Networks, Wireless
• Consumer Wireless Systems
• Industrial Wireless Systems
• Systems for Wireless Audio
• Metering systems utilizing IEEE 802.15.4 and ZigBee?

Features of CC2650F128RHB

• Microprocessor - Strong ARM Cortex-M3 processor - 142 for EEMBC CoreMark? - Maximum Clock Speed of 48 MHz - 128 KB of programmable in-system flash - Cache: 8KB of SRAM - 20KB of SRAM with ultra-low leakage. - JTAG and 2-Pin cJTAG Debugging - Facilitates Over-The-Air Upgrade (OTA)
• Sensor Controller with Ultralow Power - Can Operate Independently of the Rest of the System - 16-Bit architecture - 2KB of SRAM with extremely minimal leakage for code and data.
• Packages Compliant with RoHS - RSM VQFN32, 4-mm x?4-mm (10 GPIOs) - RHB VQFN32, 5-mm x?5-mm (15 GPIOs) - RGZ VQFN48, 7-mm x?7-mm (31 GPIOs)
• Peripherals - Any GPIO Can Be Used to Route All Digital Peripheral Pins - Four modules for general-purpose timers. - 200 ksamples/s, 8-Channel Analog MUX, 12-Bit ADC - Comparator for Continuous Time - Ultralow-Power Analog Comparer -Modifiable Current Source - UART - Clock in Real Time (RTC) - Security Module AES-128 - The TRNG (True Random Number Generator) (TRNG) - Depending on the package option, 10, 15, or 31 GPIOs - Eight capacitive-sensing buttons are supported. - Temperature sensor built-in
• ?Outside System - Internal On-Chip DC-DC Converter - Low Number of External Components - Complete Integration With Simple LinkTM CC2590 and CC2592 Range Extenders - Compatible with the CC13xx pin of Simple Link - VQFN Packages in 4-mm x 4-mm and 5-mm x 5-mm sizes
• Small Power - Broad Supply Voltage Spectrum ? In normal use, 1.8 to 3.8 V ? 1.7 to 1.95 V in external regulator mode -5.9 mA Active-Mode RX - Active-Mode TX: 6.1 mA at 0 dBm - 9.1 mA for Active-Mode TX at +5 dBm -MCU in Active Mode: 61 A/MHz -48.5 CoreMark/mA for Active-Mode MCU -8.2 A/MHz Active-Mode Sensor Controller - RAM/CPU Retention and RTC Running: 1 A in Standby - Shutdown 100 nanoamperes (Wake Up on External Events)

Application of CC2650F128RHB

• Electronics for consumers  
• Cellular Phone Accessory  
• Sports and exercise gear  
• Applications for HID  
• Building and Home Automation
• Lighting Management  
• Security and Alarm  
• Labeling Electronic Shelves  
• Nearby tags  
• Health  
• Wireless controls  
• Sensor Networks, Wireless

 

Features of L30960-N3410-A400

• LTE (20,8,3,7,1); 3G (8,3); and 2G Dual Band PLS8-E
• PLS8-US: 3G (5,4,2), 2G Quad Band, and LTE (17,5,4,2).
• LTE (1,3,19); 3G; PLS8-J (1,19)
• PLS8-X: 3G (5,4,2), 2G Quad Band, and LTE (13,17,5,4,2).
• LTE PLS8-V: (13,4,2)
• LTE (2x2 DL-MIMO; FDD 3GPP Release 9)
• 3GPP Release 8; UMTS/HSPA (FDD); Rx diversity
• 3GPP Release 6; DARP/SAIC; GSM/GPRS/EDGE
• SIM Application Toolkit, version 99 of the 3GPP
• Using AT instructions to control (Hayes, TS 27.007, TS 27.005)
• Complete GPS/GLONASS integration (Qualcomm gpsOne Gen8A)
• 3.3 to 4.2 V supply voltage range, especially tuned for low power usage
• Dimensions are 29 mm by 33 mm by 2,2 mm (PLS8-V/-X: H=2,9 mm).
• Range of Operation: -40 ?C to +85 ?C
• EuP support, RoHS and REACH compliance

Special Features of L30960-N3410-A400

• Multiple composite modes and a Linux/Mac-compliant mode are supported by the USB interface.  
• USB-based firmware update  
• BIP (Bearer Independent Protocol) (Bearer Independent Protocol)  
• From Rel.3.0 and for PLS8-X /-V, IP services (Client & Server, TCP/IP & UDP, Transparent & Nontransparent) are available.  
• According to 3GPP TS 27.010, a multiplexer  
• PLS8-X Automatic Carrier Switching

 

The MT8880 is a monolithic DTMF transceiver with call progress filter. It is fabricated in Mitel?s ISO2- CMOS technology, which provides low power dissipation and high reliability. The DTMF receiver is based upon the industry standard MT8870 monolithic DTMF receiver; the transmitter utilizes a switched capacitor D/A converter for low distortion, high accuracy DTMF signalling. Internal counters provide a burst mode such that tone bursts can be transmitted with precise timing. A call progress filter can be selected allowing a microprocessor to analyze call progress tones. A standard microprocessor bus is provided and is directly compatible with 6800 series microprocessors.