M29W800FB70N3F TR 3V, Parallel NOR Flash

The SST89E5xxRD2 and SST89V5xxRD2 are FlashFlex51 family 8-bit microcontroller devices designed and manufactured using SST's unique and proprietary Super Flash CMOS semiconductor manufacturing technology. SST's clients gain significantly from the split-gate device structure and thick-oxide tunnelling injector in terms of cost and reliability. The devices are pin-for-pin compatible with ordinary 8051 microcontroller devices and use the 8051 instruction set. The devices include 16/24/40/72 K Byte of on-chip flash EEPROM programme memory that is divided into two separate programme memory blocks. The primary Block 0 has 8/16/32/64K Bytes of internal programme memory space, whereas the secondary Block 1 has 8K Bytes of internal programme memory space. The 8-KByte secondary block can be identified to the minimum address point in the 8/16/32/64 K Byte address space, as well as concealed from the programme counter and utilised as an independent EEPROM-like data store. In addition to the on-chip EEPROM programme memory of 16/24/40/72 K Bytes, the devices may address up to 64 K Bytes of external programme memory. In addition to 1024 x 8 bits of on-chip RAM, external RAM of up to 64 K Bytes may be addressed.

Features Low and Standard Voltage Operation: 2.7 (VCC = 2.7 to 5.5 V) and 1.8 (VCC = 1.8 to 5.5 V) ?128 x 8, 256 x 8, 512 x 8, 1024 x 8, or 2048 x 8 internal organisation (16K) Bidirectional Data Transfer Protocol, Schmidt Trigger, Filtered Inputs for Noise Suppression, Two-wire Serial Interface, and Compatibility at 100 kHz (1.8V) and 400 kHz (2.7V, 5V) 8-byte page (1K, 2K), 16-byte page, Write Protect Pin for Hardware Data Protection (4K, 8K, 16K) Writing Styles ?High-reliability? Endurance: 1 Million Write Cycles? Data Retention: 100 Years ?Partial Page Writes Allowed ?Self-timed Write Cycle (5 ms max) ?Automotive Grade and Lead-free/Halogen-free Devices Available ?5-lead SOT23,8-lead TSSOP,8-lead PDIP,8-lead JEDEC SOIC,8-lead MAP, and 8-ball dBGA2 Packages ?Die Sales: Bumped Wafers, Waffle Packs, and Wafer Forms The 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) provided by the AT24C01A/02/04/08A/16A are structured as 128/256/512/1024/2048 words of 8 bits each. The gadget is designed with a variety of industrial and business applications in mind, where low-power and low-voltage functioning are crucial. The AT24C01A/02/04/08A/16A is accessible through a Two-wire serial interface and is offered in compact 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 5-lead SOT23 (AT24C01A/AT24C02/AT24C04), 8-lead TSSOP, and 8-ball dBGA2 packages. There are other variants of the complete series in 2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) voltage ranges.

A CMOS 8-bit microcontroller with 20K bytes of Flash programmable read-only memory and 256 bytes of RAM, the AT89C55WD is a low-power, high-performance device. The product is made using high-density flash storage technology from Atmel and has pinout and an instruction set that comply with industry standards 80C51 and 80C52. An ordinary nonvolatile memory programmer can user programme the programme memory thanks to the on-chip Flash. The Atmel AT89C55WD is a potent microcomputer that offers a very flexible and area of business to many embedded control applications by mixing a flexible 8-bit CPU with Flash on a monolithic chip. The following features are included as standard with the AT89C55WD: A full-duplex serial port, an on-chip oscillator, clock circuitry, three 16-bit timer/counters, 32 I/O lines, 256 bytes of RAM, 20K bytes of Flash, and a six-vector, two-level interrupt architecture. The AT89C55WD also features two software-selectable power-saving modes and static logic allowing operating down to zero frequency. The CPU is turned off in idle mode, but the RAM, timers and counters, serial port, and interruption system are still operational. The oscillator is frozen in the Power-down Mode, which also disables all other chip operations until the next error detection or device reset. However, the RAM contents are saved.

Features? of M24128-DRD

• Support for all I2C bus modes? 1 MHz/ 400 kHz/ 100 kHz
• Memory bank- An EEPROM with 128 Kbits (16 Kbytes)
• Page Size in Bytes: 64
• In addition Make a locked page.
• Wider range of temperatures and voltages?40 to 105 degrees Celsius; 1.7 to 5.5 volts
• Schmitt trigger inputs are used to filter noise.
• Cycle time for short writes- Byte Write in 4 milliseconds- Page Write in 4 milliseconds
• Express cycling stamina. -4,000,000 Write Cycles at 25 ?C, - 1,2,000,000 Write cycles at 85 ?C & ? 900 k Cycles of writing at 105 ?C
• Data storage- at 105 ?C for more than 50 years., 200 yr at 55 ?C
• ESD Defense (Human Body Model)? 4000 V
• Packing is- Halogen-free and RoHS compliant

Characteristics of M24128-DRD

• SMD/SMT mounting style
• Case/Package: TSSOP-8
• Interface types: I2C and 2-Wire
• Size of Memory: 128 kbit
• Arrangement: 16 k x 8
• Minimum Supply Voltage: 1.7 V
• Maximum Supply Voltage: 5.5 V
• 40 C for the minimum operating temperature
• 105 C is the maximum operating temperature.
• 1 MHz is the maximum clock frequency.
• Time to Access: 450 ns
• Retention of Data: 200 Years
• Maximum Supply Current: 2 mA
• The M24128-DRD series
• mandatory requirement: AEC-Q100
• Packaging: Cut Tape and Reel
• Maximum Active Read Current: 2 mA
• STMicroelectronics is a brand.
• 2 mA is the operating supply current.
• Voltage Range for Operating Supply: 1.8 to 5.5 V
• Type of Product: EEPROM