AT24C512C-SSHD

The 24AA512/24LC512/24FC512 (24XX512*) from Microchip Technology Inc. is a 64K x 8 (512 Kbit) Serial Electrically Erasable PROM that can operate over a wide voltage range (1.7V to 5.5V). It was created for cutting-edge, low-power applications including data collection and personal communications. Additionally, this device has a page write capacity of up to 128 bytes of information. Both random and sequential readings up to the 512K barrier are supported by this device. Up to eight devices can share a bus with functional address lines, providing a maximum address space of 4 Mbit. The common 8-pin plastic DIP, SOIJ, SOIC, TSSOP, DFN, and 14-lead TSSOP packaging are also available for this component. The 8-lead Chip Scale package is another option for the 24AA512. Features: ? A single supply that operates 24AA512 and 24FC512 devices at 1.7V and 24LC512 devices at 2.5V. ? CMOS Low-Power Technology: - A average active current of 400 uA - Typical standby current is 100 nA ? Compatible with 2-Wire Serial Interface and I2CTM ? Up to eight devices can be cascaded ? Noise-cancelling Schmitt Trigger Inputs ? Ground Bounce is eliminated through output slope control. ? Compatibility of 100 kHz and 400 kHz clocks ? Maximum Page Write Time 5 ms. ? Timed Erase/Write Cycle on Your Own ? Page Write Buffer of 128 bytes Equipment Write-Protect ? >4000V ESD Protection ? Over 1,000,000 Erase/Write Cycles ? 200 years of data retention ? The following packages are available: 8-lead PDIP, SOIJ, SOIC, BTSSOP, DFN, Chip Scale, and 14-lead TSSOP. ? RoHS and Pb-Free Compliant ? Ranges of temperatures Industrial (I): -40?F to 85?F Vehicle (E): -40 to 125C

The 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) provided by the AT24C01A/02/04/08A/16A are structured as 128/256/512/1024/2048 words of 8 bits each. The gadget is designed with a variety of industrial and business applications in mind, where low-power and low-voltage functioning are crucial. The AT24C01A/02/04/08A/16A is accessible through a Two-wire serial interface and is offered in compact 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 5-lead SOT23 (AT24C01A/AT24C02/AT24C04), 8-lead TSSOP, and 8-ball dBGA2 packages. There are other variants of the complete series in 2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) voltage ranges. Features Low and Standard Voltage Operation: 2.7 (VCC = 2.7 to 5.5 V) and 1.8 (VCC = 1.8 to 5.5 V) ?128 x 8, 256 x 8, 512 x 8, 1024 x 8, or 2048 x 8 internal organisation (16K) Bidirectional Data Transfer Protocol, Schmidt Trigger, Filtered Inputs for Noise Suppression, Two-wire Serial Interface, and Compatibility at 100 kHz (1.8V) and 400 kHz (2.7V, 5V) 8-byte page (1K, 2K), 16-byte page, Write Protect Pin for Hardware Data Protection (4K, 8K, 16K) Writing Styles ?High-reliability? Endurance: 1 Million Write Cycles? Data Retention: 100 Years ?Partial Page Writes Allowed ?Self-timed Write Cycle (5 ms max) ?Automotive Grade and Lead-free/Halogen-free Devices Available ?5-lead SOT23,8-lead TSSOP,8-lead PDIP,8-lead JEDEC SOIC,8-lead MAP, and 8-ball dBGA2 Packages ?Die Sales: Bumped Wafers, Waffle Packs, and Wafer Forms

A CMOS 8-bit microcontroller with 20K bytes of Flash programmable read-only memory and 256 bytes of RAM, the AT89C55WD is a low-power, high-performance device. The product is made using high-density flash storage technology from Atmel and has pinout and an instruction set that comply with industry standards 80C51 and 80C52. An ordinary nonvolatile memory programmer can user programme the programme memory thanks to the on-chip Flash. The Atmel AT89C55WD is a potent microcomputer that offers a very flexible and area of business to many embedded control applications by mixing a flexible 8-bit CPU with Flash on a monolithic chip. The following features are included as standard with the AT89C55WD: A full-duplex serial port, an on-chip oscillator, clock circuitry, three 16-bit timer/counters, 32 I/O lines, 256 bytes of RAM, 20K bytes of Flash, and a six-vector, two-level interrupt architecture. The AT89C55WD also features two software-selectable power-saving modes and static logic allowing operating down to zero frequency. The CPU is turned off in idle mode, but the RAM, timers and counters, serial port, and interruption system are still operational. The oscillator is frozen in the Power-down Mode, which also disables all other chip operations until the next error detection or device reset. However, the RAM contents are saved.

Features? of M24128-DRD

• Support for all I2C bus modes? 1 MHz/ 400 kHz/ 100 kHz
• Memory bank- An EEPROM with 128 Kbits (16 Kbytes)
• Page Size in Bytes: 64
• In addition Make a locked page.
• Wider range of temperatures and voltages?40 to 105 degrees Celsius; 1.7 to 5.5 volts
• Schmitt trigger inputs are used to filter noise.
• Cycle time for short writes- Byte Write in 4 milliseconds- Page Write in 4 milliseconds
• Express cycling stamina. -4,000,000 Write Cycles at 25 ?C, - 1,2,000,000 Write cycles at 85 ?C & ? 900 k Cycles of writing at 105 ?C
• Data storage- at 105 ?C for more than 50 years., 200 yr at 55 ?C
• ESD Defense (Human Body Model)? 4000 V
• Packing is- Halogen-free and RoHS compliant

Characteristics of M24128-DRD

• SMD/SMT mounting style
• Case/Package: TSSOP-8
• Interface types: I2C and 2-Wire
• Size of Memory: 128 kbit
• Arrangement: 16 k x 8
• Minimum Supply Voltage: 1.7 V
• Maximum Supply Voltage: 5.5 V
• 40 C for the minimum operating temperature
• 105 C is the maximum operating temperature.
• 1 MHz is the maximum clock frequency.
• Time to Access: 450 ns
• Retention of Data: 200 Years
• Maximum Supply Current: 2 mA
• The M24128-DRD series
• mandatory requirement: AEC-Q100
• Packaging: Cut Tape and Reel
• Maximum Active Read Current: 2 mA
• STMicroelectronics is a brand.
• 2 mA is the operating supply current.
• Voltage Range for Operating Supply: 1.8 to 5.5 V
• Type of Product: EEPROM