Awaiting product image
Click to enlarge
LNK6666E
LNK6666E ₹50.00
Back to products
Placeholder
ADA4851-2YRMZ ₹230.00

71M6513H-IGT/F

₹500.00

Features

Line Frequency Range of 40-70Hz with the Same Calibration

7? Phase Compensation

RAM and RTC Battery Backup

22mW at 3.3V, backup power of 7.2W

Optional Flash Memory with Security

8-Bit MPU (80515)?One Clock Cycle for Each Instruction

LCD (168 Pixels) Driver

SSI Serial Output at High Speed

Time-of-Use Functions Using RTC

Hardware Timer Watchdog

Up to 22 General-Purpose I/O Pins are available.

64KB Flash and 7KB RAM

There are two UARTs for IR and AMR.

LQFP 100-Pin Package

Add to compare
Add to wishlist
SKU: CMMC- 0003 Category:
Description

The 71M6513 is a system-on-chip (SoC) having an MPU core, real-time clock (RTC), flash memory, and an LCD driver. With a 21-bit delta-sigma ADC, six analogue inputs, digital temperature correction, precision voltage reference, and 32-bit calculation engine (CE), our Single Converter Technology? offers a wide range of poly-phase metering applications with relatively few low-cost external components.

A 32kHz crystal time foundation for the whole system, as well as inbuilt battery backup support for RAM and RTC, lower system costs even more. Multiple UARTs, I2C, a power fail comparator, a 5V LCD charge pump, up to 22 DIO pins, and an in-system programmable flash enable maximum design freedom.

For multifunction residential/commercial metre applications needing numerous voltage/current inputs and sophisticated LCD or DIO layouts, the device is available in high (0.1%) and standard (0.5%) accuracy versions. A comprehensive set of ICE and development tools, programming libraries, and reference designs allows for the quick creation and certification of metres that satisfy the most stringent global power metering standards.

 

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “71M6513H-IGT/F”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

LPC1768 Microcontrollers
Add to compare

LPC1768 Microcontrollers – MCU

,
₹1,500.00
CPU frequencies of up to 100 MHz are supported by the LPC1768/67/66/65/64/63. The LPC1769 can run at CPU speeds of up to 120 MHz. The Arm Cortex-M3 CPU has a three-stage pipeline and a Harvard architecture, with separate local instruction and data buses and a third bus for peripherals. An inbuilt prefetch unit that facilitates speculative branching is also included in the Arm Cortex-M3 CPU.The LPC1769/68/67/66/65/64/63's peripheral complement includes up to 512 kB of flash memory, 64 kB of data memory, Ethernet MAC, USB Device/Host/OTG interface, 8-channel general-purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C-bus interfaces, 2-input plus 2-output I2S-bus interface, 8-channel 12-bit A  
Add to wishlist
Add to cart
Quick view
Add to compare

M031LE3AE

₹200.00
The Arm? Cortex?-M0 core with a 32-bit hardware multiplier/divider is the foundation of the NuMicro? M031/M032 series 32-bit microcontroller. It operates between -40?C and 105?C, operates at up to 48/72 MHz, and has a 1.8 3.6 V working voltage and 5 V I/O tolerance. For applications requiring a 1.8 V low-voltage interface connection with increased fast 2 MSPS conversion rate 12-bit ADC, comparators, and up to 24-ch96/144 MHz PWM control, the M031/M032 family offers a solution. For the voltages, power, and sensor readings, it offers quick and accurate data conversion, followed by quick reaction control for the external device. The Arm? Cortex?-M0 core with a 32-bit hardware multiplier/divider is the foundation of the NuMicro? M031/M032 series 32-bit microcontroller. It operates between -40?C and 105?C, operates at up to 48/72 MHz, and has a 1.8 3.6 V working voltage and 5 V I/O tolerance. For applications requiring a 1.8 V low-voltage interface connection with increased fast 2 MSPS conversion rate 12-bit ADC, comparators, and up to 24-ch96/144 MHz PWM control, the M031/M032 family offers a solution. For the voltages, power, and sensor readings, it offers quick and accurate data conversion, followed by quick reaction control for the external device. The NuMicro? M031/M032 family is appropriate for a variety of uses, including: Laser Distance Meter Air Detector/Cleaner Mobile LCD Panel Controller IoT Sensing Device HMI Controller Micro Printer Gaming Keyboard and Mouse WPC Wireless Charger  
Add to wishlist
Add to cart
Quick view
Add to compare

MCP2551

₹114.00
Microchip Technology?s MCP2515 is a stand-alone Controller Area Network (CAN) controller that implements the CAN specification, Version 2.0B. It is capable of transmitting and receiving both standard and extended data and remote frames. The MCP2515 has two acceptance masks and six acceptance filters that are used to filter out unwanted messages, thereby reducing the host MCU?s overhead. The MCP2515 interfaces with microcontrollers (MCUs) via an industry standard Serial Peripheral Interface (SPI).
Add to wishlist
Add to cart
Quick view
MCP3201-BI/P
MCP3201-BI/P
Add to compare

MCP3201-BI/P

₹285.00
MCP3201 device is a successive approximation 12-bit Analog-to-Digital (A/D) Converter with on-board sample and hold circuitry. The device provides a single pseudo-differential input. Differential Nonlinearity (DNL) is specified at ?1 LSB, and Integral Nonlinearity (INL) is offered in ?1 LSB (MCP3201-B) and ?2 LSB (MCP3201-C) versions. Communication with the device is done using a simple serial interface compatible with the SPI protocol. The device is capable of sample rates of up to 100 ksps at a clock rate of 1.6 MHz. The MCP3201 device operates over a broad voltage range (2.7V5.5V). Low-current design permits operation with typical standby and active currents of only 500 nA and 300 ?A, respectively. The device is offered in 8-pin MSOP, PDIP, TSSOP and 150 mil SOIC packages.
  • Mfr. No: MCP3201-BI/P
  • Mfr.:Microchip Technology / Atmel
  • Description: Analog to Digital Converters - ADC 12-bit SPI Sgl Chl View in Development Tools Selector View in Development Tools Selector
MCP3201-BI/P Datasheet
Add to wishlist
Add to cart
Quick view
MCP3202-BI/P
MCP3202
Add to compare

MCP3202-BI/P

₹310.00
MCP3202 is a successive approximation 12-bit analog-to-digital (A/D) converter with on-board sample and hold circuitry. The MCP3202 is programmable to provide a single pseudo-differential input pair or dual single-ended inputs. Differential Nonlinearity (DNL) is specified at ?1 LSB, and Integral Nonlinearity (INL) is offered in ?1 LSB (MCP3202-B) and ?2 LSB (MCP3202-C) versions. Communication with the device is done using a simple serial interface compatible with the SPI protocol. The device is capable of conversion rates of up to 100 ksps at 5V and 50 ksps at 2.7V. The MCP3202 operates over a broad voltage range, 2.7V to 5.5V. Low-current design permits operation with typical standby and active currents of only 500 nA and 375 ?A, respectively. The MCP3202 is offered in 8-pin MSOP, PDIP, TSSOP and 150 mil SOIC packages. Part Number:MCP3202-BI/P Manufacturer:Microchip Technology Description:IC ADC 12BIT SAR 8DIP Detailed Description: 12 Bit Analog to Digital Converter 1, 2 Input 1 SAR 8-PDIP MCP3202-BI/P Datasheet
Add to wishlist
Add to cart
Quick view
Add to compare

MCP3204-BI/P

₹423.00
The Microchip Technology Inc. MCP3204/3208 devices are successive approximation 12-bit Analogto-Digital (A/D) Converters with on-board sample and hold circuitry. The MCP3204 is programmable to provide two pseudo-differential input pairs or four single-ended inputs. The MCP3208 is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential Nonlinearity (DNL) is specified at ?1 LSB, while Integral Nonlinearity (INL) is offered in ?1 LSB (MCP3204/3208-B) and ?2 LSB (MCP3204/3208-C) versions.
Add to wishlist
Add to cart
Quick view
Add to compare

MCP602-I/P

₹61.00
? Single-Supply: 2.7V to 6.0V ? Rail-to-Rail Output ? Input Range Includes Ground ? Gain Bandwidth Product: 2.8 MHz (typical) ? Unity-Gain Stable ? Low Quiescent Current: 230 ?A/amplifier (typical) ? Chip Select (CS): MCP603 only ? Temperature Ranges: - Industrial: -40?C to 85?C - Extended: -40?C to 125?C ? Available in Single, Dual, and Quad
Add to wishlist
Add to cart
Quick view
N79E352RADG Nuvoton Microcontroller IC
N79E352RADG Nuvoton Microcontroller IC
Add to compare

N79E352RADG Nuvoton Microcontroller

,
₹100.00
N79E352(R) is an 8-bit Turbo 51 microcontroller which has Flash EPROM programmable hardware writer. The instruction set of the N79E352(R) is fully compatible with the standard 8052. The N79E352(R) contains a 8Kbytes of main Flash EPROM; a 256 bytes of RAM; 128 bytes NVM Data Flash EPROM; three 16-bit timer/counters; 2-channel 8-bit PWM; 1-channel UART and 1 additional input capture. These peripherals are supported by 11 interrupt sources four-level interrupt capability. To facilitate programming and verification, the Flash EPROM inside the N79E352(R) allows the program memory to be programmed and read electronically. Once the code is confirmed, the user can protect the code for security. N79E352(R) is designed for cost effective applications which can serve industrial devices, and other low power applications.
  • Part Number: N79E352RADG-ND
  • Manufacturer: Nuvoton Technology Corporation
  • Description: IC MCU 8BIT 8KB FLASH 40DIP
  • Detailed Description: 8051 N79 Microcontroller IC 8-Bit 24MHz 8KB (8K x 8) FLASH
N79E352RADG Datasheet:
Add to wishlist
Add to cart
Quick view