74LS73 Dual JK Flip-Flop with Clear IC (7473 IC) DIP-14 Package
74LS74 Dual D-type Positive Edge-triggered Flip-Flops IC (7474 IC) DIP-14 Package
74LS90 Decade Counter IC (7490 IC) DIP-14 Package
74LS95 4-bit Parallel-Access Shift Register IC (7495 IC) DIP-14 Package
74LS96 5-Bit Shift Register IC (7496 IC) DIP-16 Package
The 74LS96?is a 5-bit shift register with both serial and parallel (ones transfer) data entry. Since the '96 has the output of each stage available as well as a D-type serial input and ones transfer inputs on each stage, it can be used 5-bit serial- to-parallel, serial-to-serial and some parallel-to-serial data operations.
89E516RD2
The SST89E5xxRD2 and SST89V5xxRD2 are FlashFlex51 family 8-bit microcontroller devices designed and manufactured using SST's unique and proprietary Super Flash CMOS semiconductor manufacturing technology. SST's clients gain significantly from the split-gate device structure and thick-oxide tunnelling injector in terms of cost and reliability. The devices are pin-for-pin compatible with ordinary 8051 microcontroller devices and use the 8051 instruction set. The devices include 16/24/40/72 K Byte of on-chip flash EEPROM programme memory that is divided into two separate programme memory blocks. The primary Block 0 has 8/16/32/64K Bytes of internal programme memory space, whereas the secondary Block 1 has 8K Bytes of internal programme memory space.
The 8-KByte secondary block can be identified to the minimum address point in the 8/16/32/64 K Byte address space, as well as concealed from the programme counter and utilised as an independent EEPROM-like data store. In addition to the on-chip EEPROM programme memory of 16/24/40/72 K Bytes, the devices may address up to 64 K Bytes of external programme memory. In addition to 1024 x 8 bits of on-chip RAM, external RAM of up to 64 K Bytes may be addressed.
A 3982 SLBT
A4506 HCPL4506 Optocoupler IC Gate Drive
The HCPL-4504 contains a GaAsP LED. The LED is optically coupled to an integrated high gain photodetector. The HCPL-4504 series has short propagation delays and high CTR. The HCPL-4504 series also has a guaranteed propagation delay difference (tPLH-tPHL). These features make the HCPL-4504 series an excellent solution to IPM inverter dead time and other switching problems.
AD518JH- ANALOG DEVICE
TheAD518'sdcperformance is consistentwithitsprecisiondynamiccharacteristics.Thedevicesfeatureoffsetvoltagesbelow2mV,maximumoffsetdriftsof15J1.V/C,andoffsetcurrentsbelow50nAmax.Thehighslewrate,fastsettlingtime,easeofuse,andlowcostoftheAD518makeit idealforusewithDIAandAIDconverters,aswellasactivefilters,sample-and-holdcircuits,andasa generalpurpose,fast,widebandamplifier.TheAD518is suppliedintheTO-99package
AD521JD ANALOG DEVICE
As a complete instrumentation amplifier, the AD521 requires
only two resistors to set its gain to any value between 0.1 and
1000. The ratio matching of these resistors does not affect the
high CMRR (up to 120dB) or the high input impedance (3 X
109il) of the AD521. Furthermore, unlike most operational
amplifier-based instrumentation amplifiers, the inputs are
protected against over voltage sup to :1:15volts beyond the
supplies.
The AD521 IC instrumentation amplifier is available in four
different versions of accuracy and operating temperature range.
The economical "J" grade, the low drift "K" grade, and the
lower drift, higher linearity "L" grad