Showing 601–612 of 734 results

TL072 Low Noise Dual JFET Op-Amp IC DIP-8

21.00
The TL072 JFET-input operational amplifiers incorporate well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low-input bias and offset currents, and low offset-voltage temperature coefficient. The low harmonic distortion and low noise make the TL072 series ideally suited for high-fidelity and audio pre-amplifier applications.

TL082 JFET Input Operational Amplifier (Op-Amp) IC DIP-8

17.00
The TL082 JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset-voltage temperature coefficient.

TL084 Quad JFET Input Operational Amplifier (Op-Amp) IC DIP-14

22.00
The TL084 JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset-voltage temperature coefficient.

TL431 Adjustable Precision Shunt Regulator TO-92 Package

6.00
TL431 is three-terminal adjustable regulator series with a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between VREF (approximately 2.5 volts) and 36 volts with two external resistors. These devices have a typical dynamic output impedance of 0.2?. Active output circuitry provides a very sharp turn-on characteristic, making these devices excel lent replacement for zener diodes in many applications.

TLC5940 16 Channel PWM Control LED Driver IC DIP-28 Package

435.00
The TLC5940 is a 16-channel, constant-current sink LED driver. Each channel has an individually adjustable 4096-step grayscale PWM brightness control and a 64-step, constant-current sink (dot correction). The dot correction adjusts the brightness variations between LED channels and other LED drivers.

TLP250H

125.00
1. Applications ? Industrial Inverters ? Air Conditioner Inverters ? IGBT Gate Drivers ? MOSFET Gate Drivers ? Induction Cooktop and Home Appliances 2. General The TLP250H is a photocoupler in a DIP8 package that consists of a GaA?As infrared light-emitting diode (LED) optically coupled to an integrated high-gain, high-speed photodetector IC chip. It provides guaranteed performanceand specifications at temperatures up to 125.?The TLP250H has an internal Faraday shield that provides a guaranteed Common-mode transient immunity of ?40 kV/?s. It has a totem-pole output that can both sink and source current. The TLP250H is ideal for IGBT and power MOSFET gate drive. 3. Features (1) Buffer logic type (totem pole output) (2) Output peak current:?2.5 A (max) (3) Operating temperature: -40 to 125 (4) Supply current: 3 mA (max) (5) Supply voltage: 10 to 30 V (6) Threshold input current: 5 mA (max) (7) Propagation delay time: 500 ns (max) (8) Common-mode transient immunity:?40 kV/?s (min) (9) Isolation voltage: 3750 Vrms (min)

TLP5214(E)

600.00
The TLP5214 is a highly integrated 4.0A output current IGBT gate drive photocoupler housed in a long creepage and clearance SO16L package. The TLP5214, a smart gate driver photocoupler, includes functions of IGBT desaturation detection, isolated fault status feedback, soft IGBT turn-off, active Miller cramping and under voltage lockout (UVLO). This photocoupler is suitable for driving IGBT and power MOSFET used in inverter applications. The TLP5214 consists two infrared LEDs and two high-gain and high-speed ICs. They realize high current, high-speed output control and output fault status feedback. ? Peak output current: ?4.0 A (max) ? Guaranteed performance over temperature: ?40?C to 110?C ? Supply current: 3.5 mA (max) ? Power supply voltage: 15 V to 30 V ? Threshold input current: IFLH = 6 mA (max) ? Switching time (tpLH / tpHL) : 150 ns (max) ? Common-mode transient immunity: ?35 kV/?s (min) ? Isolation voltage: 5000 Vrms (min)

TLV62585RWT

26.00
Features of TLV62585RWT
  • 95% maximum efficiency
  • 56 m / 32 m low RDS(ON) power switches
  • Range of input voltages: 2.5 to 5.5 V
  • Variable output voltage between 0.6 and VIN
  • Efficiency in power saving mode for light loads
  • Maximum duty cycle for minimal dropout
  • Operating quiescent current of 35 A
  • Typical switching frequency of 1.5 MHz
  • Short circuit defense (HICCUP)
  • Discharge of output
  • Excellent power output
  • Thermal shut-down defense
  • Available either a 1.6-mm x 1.6-mm SOT563 package or a 2-mm x 2-mm QFN package.

TLV75510PDBVR

17.00
Features of?TLV75510PDBVR ? Input Voltage Range: 1.45 V to 5.5 V ? Low IQ: 25 ?A (Typical) ? Low Dropout: ? 238 mV (Maximum) at 500 mA (3.3 VOUT) ? Output Accuracy: 1% (Maximum at 85?C) ? Built-In Soft-Start With Monotonic VOUT Rise ? Foldback Current Limit ? Active Output Discharge ? High PSRR: 46 dB at 100 kHz ? Stable With a 1-?F Ceramic Output Capacitor ? Packages: 1. 2.9-mm ? 1.6-mm SOT-23-5 2. 1-mm x 1-mm X2SON-4 3. 2 mm ? 2 mm WSON-6 Applications of? TLV75510PDBVR ? TVs, gaming consoles, and Set-Top Boxes ? Battery-operated and portable equipment ??Desktops, notebook computers, and ultrabooks ? Remote controls and tablets ? Appliances and White Goods ? Grid Relays and Infrastructure for Protection ? Image sensors and camera modules

TNY253GN-TL

100.00
AC/DC Converters 2W 85-265 VAC 4W 100/115/230 VAC