NE592D8R2G
The NE592 is a monolithic, two-stage, differential output,
wideband video amplifier. It offers fixed gains of 100 and 400
without external components and adjustable gains from 400 to 0 with
one external resistor. The input stage has been designed so that with
the addition of a few external reactive elements between the gain
select terminals, the circuit can function as a high-pass, low-pass, or
band-pass filter. This feature makes the circuit ideal for use as a
video or pulse amplifier in communications, magnetic memories,
display, video recorder systems, and floppy disk head amplifiers.
Now available in an 8-pin version with fixed gain of 400 without
external components and adjustable gain from 400 to 0 with one
external resistor.
Features
? 120 MHz Unity Gain Bandwidth
? Adjustable Gains from 0 to 400
? Adjustable Pass Band
? No Frequency Compensation Required
? Wave Shaping with Minimal External Components
? MIL-STD Processing Available
? These Devices are Pb?Free and are RoHS Compliant
Applications
? Floppy Disk Head Amplifier
? Video Amplifier
? Pulse Amplifier in Communications
? Magnetic Memory
? Video Recorder Systems
OP07 Ultralow Offset Voltage Op-Amp IC DIP-8
The OP07 has very low input offset voltage (75 ?V maximum for OP07E) that is obtained by trimming at the wafer stage. These low offset voltages generally eliminate any need for external nulling. The OP07 also features low input bias current (?4 nA for the OP07E) and high open-loop gain (200 V/mV for the OP07E). The low offset and high open-loop gain make the OP07 particularly useful for high gain instrumentation applications.
OP177 Ultra-Precision Operational Amplifier IC DIP-8
The OP177 features one of the highest precision performance of any operational amplifier currently available. Offset voltage of the OP177 is only 25 ?V maximum at room temperature. The ultralow VOS of the OP177 combines with the exceptional offset voltage drift (TCVOS) of 0.3 ?V/?C maximum to eliminate the need for external VOS adjustment and increases system accuracy over temperature. The OP177 open-loop gain of 12 V/?V is maintained over the full ?10 V output range. CMRR of 130 dB minimum, PSRR of 120 dB minimum, and maximum supply current of 2 mA are just a few examples of the excellent performance of this operational amplifier. The combination of outstanding specifications of the OP177 ensures accurate performance in high closed-loop gain applications.
PC817X3NIP1B
PC817XxNSZ1B Series contains an IRED optically
coupled to a phototransistor.
It is packaged in a 4-pin DIP.
Input-output isolation voltage(rms) is 5kV.
Collector-emitter voltage is 80V.
CTR is 50% to 400% (at IF=5mA,VCE=5V,Ta=25?)
? Features
1.4-pin DIP package
2. Double transfer mold package
(Ideal for Flow Soldering)
3. High isolation voltage between input and output
(Viso (rms) :5kV)
4. High collector-emitter voltage(VCEO :80V)
5. Current transfer ratio
(CTR : MIN. 50% at IF=5 mA, VCE=5V ,Ta=25?)
6. RoHS directive compliant
PCF85163D
Nearly any Liquid Crystal Display (LCD)1 with modest multiplex rates may be interfaced with the PCF85162 peripheral device. Any static or multiplexed LCD with up to four backplanes and up to 32 segments can have its driving signals generated by this device. For bigger LCD applications, it is simply cascaded. The two-line bidirectional I2 C-bus is used by the PCF85162 for communication with the majority of microcontrollers. A display RAM with auto-incremented addressing, hardware sub addressing, and display memory switching (static and duplex drive modes) all reduce communication overheads.
Features
LCD controller and driver on a single chip
Selectable display bias configuration: static, 12, or 13; Internal LCD bias generation with voltage-follower buffers; Selectable backplane drive configuration: static, 2, 3, or 4 backplane multiplexing; 32 segment drives:
Up to 8 14-segment alphanumeric characters, up to 16 7-segment numeric characters, and up to 128 components of any image
For storing display data, use 32 bits of RAM.
Flexible flashing modes; switching between display memory banks in static and duplex driving modes; and independent supply for LCD and logic voltage
Broad power supply range: 1.8 to 5.5 volts
PM8909
REF01 IC – 10V Precision Voltage Reference IC
The REF01 is industry-standard precision voltage references. The stable 10V output of the REF01 can be adjusted over a ?6% range with minimal effect on temperature stability. The 10V REF01 has a single-supply operation over an input voltage range of 13V to 33V. The devices offer a low-current drain of 1mA.
REF02 IC – 5V Precision Voltage Reference IC
The REF02 are industry-standard precision voltage references. The 5V output REF02 can also be adjusted over a ?6% range. The 5V REF02 has a single-supply operation over an input voltage range of 7V to 33V. Both devices offer a low-current drain of 1mA. The REF02 also provides a TEMP pin whose output voltage varies linearly with temperature, making this device suitable for a wide variety of temperature-sensing and control applications. For new designs, refer to the MAX6035 or MAX6143 data sheets.
REF03 IC – 2.5V Precision Voltage Reference IC
The REF03 precision voltage reference provides a stable 2.5 V output, with minimal change for variations in supply voltage, ambient temperature, or loading conditions. Single-supply operation over an input voltage range of 4.5 V to 33 V with a current drain of 1 mA and good temperature stability is achieved using an improved band gap design. Primarily targeted at price sensitive applications, the REF03 is available in plastic mini DIPs and surface-mount small outline plastic packages. For improved performance or ?40?C to 125?C operation, see the ADR03 data sheet.
