BP3122
₹15.00
The BP3122 is a high precision primary-side feedback and regulation controller for LED lighting that functions in constant current control mode and is designed to work in inductor current discontinuous conduction mode, making it particularly ideal for fly back converters with universal input. The system’s output power should be less than 5W.
The BP3122 contains a 650V power MOSFET. The secondary sensing and feedback circuit has been deleted since the adoption of main sense and feedback control technology. The looping compensatory components are likewise deleted while the overall operating conditions remain stable. It employs patent-pending source driver design and demagnetization detecting technology, has a very low operating current, and does not require an extra winding for measuring output current and powering the device. Because of the low component counts
Using the innovative high precise current sensing technology, the BP3122 achieves 5% LED current accuracy as well as good line and load control.
The BP3122 includes several protective features such as LED open/short circuit protection, CS resistor short circuit protection, over-temperature protection, and VCC under voltage protection.
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisqueĀ vestibulum amet elit ut volutpat.
Related products
CP2102 IC
CP2102 IC USB to UART Bridge provides a complete plug-and-play interface solution that includes royalty-free drivers. This USB 2.0 compliant device includes 0 digital I/O pins and is available in a 5x5 mm Ā QFN28 package.
Specifications:-CP2102 IC
| Parameter | Min | Max | Unit |
| Ambient Temperature under Bias TBIAS | -55 | 125 | ĀŗC |
| Storage Temperature TSTG | -65 | 150 | ĀŗC |
| Voltage on VDD with respect to GND VDD | -0.3 | 4.2 | V |
| Maximum Total Current through VDD and GND | - | 500 | mA |
| Maximum Output Current sunk by RST or any I/O pin | - | 100 | mA |
ULN2003 7 Darlington Transistor Arrays IC DIP-16 Package
The ULN2003 is high-voltage, high-current Darlington arrays each containing seven open collector Darlington pairs with common emitters. Each channel is rated at 500 mA and can withstand peak currents of 600 mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout.
MCP23017 16-Bit Input/Output Expander with I2C Interface IC DIP-28 Package
The MCP23017 device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface:?MCP23017 ? I2C interface??The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection.
MCP2510 CAN Controller Interface IC DIP-18 Package
The Microchip Technology Inc. MCP2510 is a Full Controller Area Network (CAN) protocol controller implementing CAN specification V2.0 A/B. It supports CAN 1.2, CAN 2.0A, CAN 2.0B Passive, and CAN 2.0B Active versions of the protocol, and is capable of transmitting and receiving standard and extended messages.
MCP2551 CAN Transceiver IC DIP-8 Package
The MCP2551 is a high-speed CAN. fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 device provides differential transmit and receive capability for the CAN protocol controller, and is fully compatible with the ISO-11898 standard, including 24V requirements.
Reviews
There are no reviews yet.