TPS54332DDA
Features of TPS54332DDA
- An input voltage range of 3.5 to 28 volts
- Output voltage is variable down to 0.8 V
- An integrated 80-m high-side MOSFET can handle an output current of up to 3.5 A continuously.
- High efficiency with pulse-skipping Eco-ModeTM at light loads
- Fixed switching frequency of 1 MHz
- A typical shutdown quiescent current of 1 A
- Variable slow-start restricts inrush currents
- Adjustable threshold for UVLO
- Protection from overvoltage transients
- Protection against thermal shutdown, frequency foldback, and cycle-by-cycle current limits
- Available in an 8-Pin SOIC Power PADTM package with thermal enhancement
- Supported by the tool WEBENCHTM
- Usage by consumers, including set-top boxes, CPE devices, LCD displays, peripherals, and battery chargers
- Automotive and commercial power supply
- Distributed power systems with voltages of 5V, 12V, and 24V
TPS61230DRC
Applications of TPS61230DRC
- Low Voltage Products Powered by Li-Ion Batteries
- USB Power Adapter
- Apple iPads
- Battery backup units and Power Banks
- Equipment for Industrial Metering
- Range of Input Voltage: 2.3 V to 5.5 V
- Range of the output voltage: 2.5 to 5.5 V
- 96% or more Efficiency Convertor Synchronous Boost
- Power Conversion from 3.3 to 5 Volts with 2.1 A Output Current
- With Adjustable Threshold/Hysteresis, Input Supply Voltage Supervisor
- Efficiency in Power Saving Mode for Light Loads
- Disconnecting the load during shutdown
- Protection from output over voltage
- Flexible Soft Start
- Good Power Output
- Switching Frequency of 2 MHz
- Capacitor Discharge at Output
TPS65951 Power Integration IC (PMIC)
Features:
The TPS65951A1ZWSR accepts two sources of high-stability clock signals:
- 32KXIN/32KXOUT: on-board 32-kHz crystal oscillator (optionally, an external 32kHz input clock can be provided)
- HFCLKIN: an external high-frequency clock (19.2,26,or38.4MHz)
- The TPS65951 has the capability to provide: ?32KCLKOUT digital output clock ?HFCLKOUT digital output clock with the same frequency as HFCLKIN input clock
- Voltage supply : 2.7V ~ 5.5V
- Operating Temperature : -40?C to 85?C
- Package : Tape & Reel (TP), Cut Tape (CT)
- Mounting Type : Surface Mount
- Moisture Sensitivity Level : 3 (168 Hours)
- Output Current : 1.4A
- Handheld
- Mobile Devices
- OMAP
TRS3221ECPW
Features of TRS3221ECPW
? RS-232 Pin ESD Protection
- Human-Body Model at 15 kV (HBM)
? ?8 kV (IEC 61000-4-2, contact discharge) (IEC 61000-4-2, contact discharge)
? ?15 kV (IEC 61000-4-2, air-gap discharge) (IEC 61000-4-2, air-gap discharge)
? Complies with or outperforms TIA/EIA-232-F and ITU v.28 requirements
? Runs off of a 3-V to 5.5-V VCC supply
? Can run at up to 250 kbit/s
? There is one receiver and one driver
? 16-pin VQFN package, nearly chip-scale (RGT, 82% smaller than TSSOP package)
? Typical low standby current: 1 A
? Four 0.1-F external capacitors
? Accepts 3.3-V supply and 5-V logic input.
? A different, 1 Mbit/s, high-speed pin-compatible device
? For power conservation, the auto-power down feature immediately disables drivers.
Applications of TRS3221ECPW
- ?Industrial PCs
- ?Wired networking
- Data center and enterprise computing
- Battery-powered systems
- PDAs
- Notebooks
- Laptops
- Palmtop PCs
- Hand-held equipment
TSX921IYLT 10MHz RR 16V Amplifiers IC
TYN612MFP SCRs 12 Amp 600 Volt
TYN616 – 600V – 16A SCR – Thyristor
U403
The -50V InterFET IFNU401, IFNU402, and
IFNU403 JFET?s are targeted for low noise
differential amplifier designs. Gate leakages are
less than 10pA at room temperatures. The TO-71
package is hermetically sealed and suitable for
military applications. Custom specifications,
matching, and packaging options are available.
