STM32L431CBT6
stm32l431cbt6 devices are the ultra-low-power microcontrollers based on the high performance Arm? Cortex?-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm? single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
stm32l431cbt6 devices embed high-speed memories (Flash memory up to 256 Kbyte,64 Kbyte of SRAM), a Quad SPI flash memories interface (available on all packages) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix. The STM32L431xx devices embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, proprietary code readout protection and Firewall.
The devices offer a fast 12-bit ADC (5 Msps), two comparators, one operational amplifier, two DAC channels, an internal voltage reference buffer, a low-power RTC, one generalpurpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, four general-purpose 16-bit timers, and two 16-bit low-power timers.
Part No: STM32L431CBT6
Mfr.:STMicroelectronics
Description: ARM Microcontrollers - MCU Ultra-low-power FPU Arm Cortex-M4 MCU 80 MHz 128 Kbytes of Flash
STM32L431CBT6 Datasheet
STM6321SWY6F
The STM6xxx Supervisors are stand-alone devices that perform microprocessor supervisory responsibilities. The VCC input is monitored for an out-of-tolerance state using a precise voltage reference and comparator. The reset output (RST) is driven low when an invalid VCC situation occurs (or high in the case of RST). Except for the STM6322/6825, these devices additionally have a watchdog timer and/or a push-button (MR) reset input. These components are packaged in a typical 5-pin SOT23 packaging.
Features
PRECISION VCC MONITORING OF 5V, 3.3V, 3V, OR 2.5V POWER SUPPLIES
?RST OUTPUTS (ACTIVE-LOW, PUSH-PULL OR OPEN DRAIN)
?RST OUTPUTS (ACTIVE-HIGH, PUSH-PULL)
?200ms (TYP)
?WATCHDOG TIMER - 1.6sec (TYP)
?MANUAL RESET INPUT (MR)
?LOW SUPPLY CURRENT - 3?A (TYP)
?GUARANTEED RST (RST) ASSERTION DOWN TO VCC = 1.0V
?OPERATING TEMPERATURE:?40?C to 85?C
STM8S003F3P6
STM8S003F3P6 - The STM8S003F6 value line 8-bit microcontrollers offer 8 Kbytes of Flash program memory, plus integrated true data EEPROM. They are referred to as low-density devices in the STM8S microcontroller family reference manual (RM0016). The STM8S003F3 value line devices provide the following benefits: performance, robustness, and reduced system cost. Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system. The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset.
STM8S003K3T6C
The 8-bit STM8S003F3/K3 value line microcontrollers have 8 Kbytes of Flash programme memory and an inbuilt true data EEPROM. In the STM8S microcontroller family reference handbook, they are referred to as low-density devices (RM0016). The STM8S003F3/K3 value line devices offer the following advantages: performance, ruggedness, and lower system cost. True data EEPROM with up to 100000 write/erase cycles, advanced core and peripherals produced in cutting-edge technology at 16 MHz clock frequency, durable I/Os, independent watchdogs with separate clock source, and a clock security mechanism ensure device performance and resilience. A high level of system integration with internal clock oscillators, watchdog, and brown-out reset reduces system cost.
STP140NF75
This Power MOSFET is the latest development of
STMicroelectronis unique "Single Feature Size?"
strip-based process. The resulting transistor
shows extremely high packing density for low onresistance, rugged avalanche characteristics and
less critical alignment steps therefore a
remarkable manufacturing reproducibility
STP20NM50FD
The FDmesh? associates all advantages of
reduced on-resistance and fast switching with an
intrinsic fast-recovery body diode. It is therefore
strongly recommended for bridge topologies, in
particular ZVS phase-shift converters.
? High dv/dt and avalanche capabilities
? 100% avalanche tested
? Low input capacitance and gate charge
? Low gate input resistance
? Tight process control and high manufacturing
yields
STP30NF10
This Power MOSFET is the latest development of
STMicroelectronis unique "Single Feature Size?"
strip-based process. The resulting transistor
shows extremely high packing density for low onresistance, rugged avalanche characteristics and
less critical alignment steps therefore a
remarkable manufacturing reproducibility.
STP55NF06 – Mosfet – 60V 50A N-220 Package
Description - STP55NF06
STP55NF06 - Power MOSFETs have been developed using STMicroelectronics? unique STripFET process, which is specifically designed to minimize input capacitance and gate charge. This renders the devices suitable for use as primary switches in advanced high-efficiency isolated DCDC converters for telecom and computer applications, and applications with low gate charge driving requirements.
Mfr. No: STP55NF06
Mfr.:STMicroelectronics
Description: MOSFET N-Ch 60 Volt 55 Amp
Datasheet: ?STP55NF06 Datasheet (PDF)
STP60NF06
This Power MOSFET series realized with
STMicroelectronics unique STripFET process has
specifically been designed to minimize input
capacitance and gate charge. It is therefore
suitable as primary switch in advanced highefficiency isolated DC-DC converters for Telecom
and Computer application. It is also intended for
any application with low gate charge drive
requirements.
