OPA4347UA
The OPA347 is a microPower, low-cost operational amplifier
available in micropackages. The OPA347 (single version) is
available in the SC-70 and SOT23-5 packages. The OPA2347
(dual version) is available in the SOT23-8 and WCSP-8
packages. Both are also available in the SO-8. The OPA347
is also available in the DIP-8. The OPA4347 (quad) is
available in the SO-14 and the TSSOP-14.
The small size and low power consumption (34?A per channel maximum) of the OPA347 make it ideal for portable and
battery-powered applications. The input range of the OPA347
extends 200mV beyond the rails, and the output range is
within 5mV of the rails. The OPA347 also features an
excellent speed/power ratio with a bandwidth of 350kHz.
The OPA347 can be operated with a single or dual power
supply from 2.3V to 5.5V. All models are specified for
operation from ?55?C to 125?C.
OPA548F
The OPA548 device is a low-cost, high-voltage, and
high-current operational amplifier that is designed to
drive a wide variety of loads. A laser-trimmed,
monolithic, integrated circuit provides excellent lowlevel signal accuracy and high-output voltage and
current.
The OPA548 operates from either single or dual
supplies for design flexibility. In single-supply
operation, the input common-mode range extends
below ground
OPA548T
The OPA548 device is a low-cost, high-voltage, and
high-current operational amplifier that is designed to
drive a wide variety of loads. A laser-trimmed,
monolithic, integrated circuit provides excellent lowlevel signal accuracy and high-output voltage and
current.
The OPA548 operates from either single or dual
supplies for design flexibility. In single-supply
operation, the input common-mode range extends
below ground
OPA549T
The OPA340 series rail-to-rail CMOS operational
amplifiers are optimized for low-voltage, single-supply
operation. Rail-to-rail input and output and highspeed operation make them ideal for driving sampling
analog-to-digital (A/D) converters. They are also wellsuited for general purpose and audio applications as
well as providing I/V conversion at the output of
digital-to-analog (D/A) converters. Single, dual, and
quad versions have identical specifications for design
flexibility.
The OPA340 series operate on a single supply as low
as 2.5 V with an input common-mode voltage range
that extends 500 mV below ground and 500 mV
above the positive supply. Output voltage swing is to
within 1 mV of the supply rails with a 100-k? load.
These devices offer excellent dynamic response
(BW = 5.5 MHz, SR = 6 V/?s), yet quiescent current
is only 750 A. Dual and quad designs feature
completely independent circuitry for lowest crosstalk
and freedom from interaction.
OPA551FAKTWT
The OPA551x devices are low-cost operational
1? Wide Supply Range: ?4 V to ?30 V
amplifiers with high-voltage (60-V) and high-current
? High Output Current: 200 mA Continuous (200-mA) capability.
? Low Noise: 14 nV/?Hz
The OPA551 is unity-gain stable and features high
? Fully Protected: slew rate (15 V/?s) and wide bandwidth (3 MHz). The
? Thermal Shutdown OPA552 is optimized for gains of 5 or greater, and
? Output Current-Limited offers higher speed with a slew rate of 24 V/?s and a
bandwidth of 12 MHz. Both devices are suitable for
? Thermal Shutdown Indicator telephony, audio, servo, and test applications.
? Wide Output Swing: 2 V from Rail
These laser-trimmed, monolithic integrated circuits
? Fast Slew Rate: provide excellent low-level accuracy along with high
? OPA551: 15 V/?s output swing. High performance is maintained as the
? OPA552: 24 V/?s amplifier swings to its specified limits.
OPA551PA
The OPA551x devices are low-cost operational
1? Wide Supply Range: ?4 V to ?30 V
amplifiers with high-voltage (60-V) and high-current
? High Output Current: 200 mA Continuous (200-mA) capability.
? Low Noise: 14 nV/?Hz
The OPA551 is unity-gain stable and features high
? Fully Protected: slew rate (15 V/?s) and wide bandwidth (3 MHz). The
? Thermal Shutdown OPA552 is optimized for gains of 5 or greater, and
? Output Current-Limited offers higher speed with a slew rate of 24 V/?s and a
bandwidth of 12 MHz. Both devices are suitable for
? Thermal Shutdown Indicator telephony, audio, servo, and test applications.
? Wide Output Swing: 2 V from Rail
These laser-trimmed, monolithic integrated circuits
? Fast Slew Rate: provide excellent low-level accuracy along with high
? OPA551: 15 V/?s output swing. High performance is maintained as the
? OPA552: 24 V/?s amplifier swings to its specified limits
OPA627AUE4
The OPA6x7 is fabricated on a high-speed,
dielectrically-isolated complementary NPN/PNP
1? Very Low Noise: 4.5 nV/?Hz at 10 kHz process. It operates over a wide range of power
? Fast Settling Time: supply voltage of ?4.5 V to ?18 V. Laser-trimmed
? OPA627?550 ns Difet input circuitry provides high accuracy and low- to 0.01%
noise performance comparable with the best bipolar-
? OPA637?450 ns to 0.01% input operational amplifiers.
? Low VOS: 100-?V maximum
High frequency complementary transistors allow
? Low Drift: 0.8-?V/?C maximum increased circuit bandwidth, attaining dynamic
? Low IB: 5-pA maximum performance not possible with previous precision FET
? OPA627: Unity-Gain Stable operational amplifiers. The OPA627 is unity-gain
stable. The OPA637 is stable in gains equal to or ? OPA637: Stable in Gain ? 5
greater than five.
2 Applications Difet fabrication achieves extremely low input bias
currents without compromising input voltage noise
? Precision Instrumentation performance. Low input bias current is maintained
? Fast Data Acquisition over a wide input common-mode voltage range with
? DAC Output Amplifier unique cascode circuitry
P30NF10 (STP30NF10) MOSFET – 100V 35A N-Channel Power MOSFET TO-220 Package
P30NF10 is apower MOSFET is the latest development of STMicroelectronis unique "Single Feature Size?" strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.
