MPX5999D
The MPX5999D piezoresistive transducer is a state-of-the-art pressure sensor
designed for a wide range of applications, but particularly for those employing a
microcontroller or microprocessor with A/D inputs. This patented, single element
transducer combines advanced micromachining techniques, thin-film
metallization and bipolar semiconductor processing to provide an accurate, high
level analog output signal that is proportional to applied pressure.
MPX5999D
The MPX5999D piezoresistive transducer is a state-of-the-art pressure sensor
designed for a wide range of applications, but particularly for those employing a
microcontroller or microprocessor with A/D inputs. This patented, single element
transducer combines advanced micromachining techniques, thin-film
metallization and bipolar semiconductor processing to provide an accurate, high
level analog output signal that is proportional to applied pressure
MS51FB9AE
MS51FB9AE is embedded with based on 1T 8051-based CMOS microcontroller, runs up to 24 MHz, features 16 K bytes flash, 1 K bytes SRAM, and 4 K bytes loader ROM for the ISP, also equipped with rich peripherals: 2 sets of UART; 1 set of I?C, and 1 set of SPI, 18 GPIO, 8 channels of 12-bit ADC, Watchdog Timer, Window Watchdog Timer and 6*16-bit PWM channel, package is available in TSSOP20. 1T 8051-based CMOS microcontroller running up to 24 MHz. Voltage range: 2.4V to 5.5V. Temperature range: - 40 ? to 105 ?. Voltage range: 2.4V to 5.5V
Target Application:
- LED lighting
- Home appliances
- Industrial control
- Motor control
- Battery management system
- Power supplies
MSP430F1232-IDW
The Texas Instruments MSP430 family of ultralow-power microcontrollers consist of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low power
modes is optimized to achieve extended battery life in portable measurement applications. The device features
a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6?s.
MSP430F123IDW
The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low power
modes is optimized to achieve extended battery life in portable measurement applications. The device features
a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6?s.
MT79332
The MT79332 is an active power factor correction single-stage primary side control AC-DC LED driver. The on-chip PFC circuit in the MT79332 runs in critical conduction mode (CRM) to achieve high power factor and lower power MOSFET switching loss. Precision LED current is obtained using MAXIC's proprietary control approach, which eliminates the need for a secondary side detect and feed back circuit, which includes an optocoupler. The peripheral circuit is reduced because to the use of 600V power MOSFETs. To ensure system reliability, MT79332 has several protections such as over-current protection (OC), overvoltage protection (OVP), short circuit protection (SCP), and above temperature protection (OTP), among others.
Features
Single-stage Active PFC for high power factor and low THD.
?Primary side control eliminates optocoupler
?High precision LED current (?3%) Critical Conduction Mode operation
?Cycle-by-cycle current limiting
?Under-voltage lockout (UVLO) protection
?VDD and output over voltage protection
?Adjustable constant current and output power setting
?Power on soft start
? Embedded with 600V power MOSFET
?SOP8package
