LM3578AN
Inverting and Non-Inverting Feedback Inputs
easily be set up for such DC-to-DC voltage
? 1.0V Reference at Inputs conversion circuits as the buck, boost, and inverting
? Operates from Supply Voltages of 2V to 40V configurations. The LM2578A features a unique
? Output Current up to 750 mA, Saturation Less comparator input stage which not only has separate
pins for both the inverting and non-inverting inputs, than 0.9V
but also provides an internal 1.0V reference to each
? Current Limit and Thermal Shut Down input, thereby simplifying circuit design and p.c. board
? Duty Cycle up to 90%
LM358 | LM358 IC – Low Power Dual Op
LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.
LM358 | LM358 IC - Low Power Dual Op -?DataSheet?
LM358D
The LM358B and LM2904B devices are the
next-generation versions of the industry-standard
operational amplifiers (op amps) LM358 and LM2904,
which include two high-voltage (36 V) op amps.
These devices provide outstanding value for costsensitive applications, with features including low
offset (300 ?V, typical), common-mode input range to
ground, and high differential input voltage capability.
The LM358B and LM2904B op amps simplify circuit
design with enhanced features such as unity-gain
stability, lower offset voltage maximum of 3 mV (2 mV
maximum for LM358BA and LM2904BA), and lower
quiescent current of 300 ?A per amplifier (typical).
High ESD (2 kV, HBM) and integrated EMI and RF
filters enable the LM358B and LM2904B devices to be
used in the most rugged, environmentally challenging
applications.
The LM358B and LM2904B amplifiers are available
in micro-sized packaging, such as the SOT23-8, as
well as industry standard packages including SOIC,
TSSOP, and VSSOP
LM358P
The LM358B and LM2904B devices are the
next-generation versions of the industry-standard
operational amplifiers (op amps) LM358 and LM2904,
which include two high-voltage (36 V) op amps.
These devices provide outstanding value for costsensitive applications, with features including low
offset (300 ?V, typical), common-mode input range to
ground, and high differential input voltage capability.
The LM358B and LM2904B op amps simplify circuit
design with enhanced features such as unity-gain
stability, lower offset voltage maximum of 3 mV (2 mV
maximum for LM358BA and LM2904BA), and lower
quiescent current of 300 ?A per amplifier (typical).
High ESD (2 kV, HBM) and integrated EMI and RF
filters enable the LM358B and LM2904B devices to be
used in the most rugged, environmentally challenging
applications.
The LM358B and LM2904B amplifiers are available
in micro-sized packaging, such as the SOT23-8, as
well as industry standard packages including SOIC,
TSSOP, and VSSOP
LM35DZ/NOPB
LM35DZ/NOPB - LM35 Precision Temperature Sensor
The LM35 series are precision integrated-circuit temperature devices with an output voltage linearly proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling.
LM361H
Independent strobes
input, complementary TTL output voltage comparator
? Ensured high speed: 20 ns max with improved characteristics over the SE529/NE529
? Tight delay matching on both outputs for which it is a pin-for-pin replacement. The device
? Complementary TTL outputs has been optimized for greater speed performance
and lower input offset voltage. Typically delay varies
? Operates from op amp supplies: ?15V only 3 ns for over-drive variations of 5 mV to 500 mV.
? Low speed variation with overdrive variation It may be operated from op amp supplies (?15V).
? Low input offset voltage Complementary outputs having maximum skew are
? Versatile supply voltage range
LM380 2.5-Watt Audio Power Amplifier IC DIP-14 Package
LM385BM-1.2
?1% and 2% Initial Tolerance making it easy to use in almost any reference
? Operating Current of 10?A to 20mA application. The wide dynamic operating range allows
its use with widely varying supplies with excellent ? 1? Dynamic Impedance
regulation.
? Low Temperature Coefficient
? Low Voltage Reference?1.235V The extremely low power drain of the LM185-1.2-N
makes it useful for micropower circuitry. This voltage
? 2.5V Device and Adjustable Device Also reference can be used to make portable meters,
Available regulators or general purpose analog circuitry with
? LM185-2.5 Series and LM185 Series, battery life approaching shelf life.
respectively
LM386 Low Voltage Audio Power Amplifier IC DIP-8 Package
The LM386 is power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200.The inputs are ground referenced while the output automatically biases to one-half the supply voltage.
LM386N-1
Battery Operation
? Minimum External Parts
? Wide Supply Voltage Range: 4 V?12 V or
5 V?18 V
? Low Quiescent Current Drain: 4 mA
? Voltage Gains from 20 to 200
? Ground-Referenced Input
? Self-Centering Output Quiescent Voltage
? Low Distortion: 0.2% (AV = 20, VS = 6 V, RL = 8 ?,
PO = 125 mW, f = 1 kHz)
? Available in 8-Pin MSOP Package
