Showing 2257–2268 of 3920 results

LM385BM-1.2

115.00
?1% and 2% Initial Tolerance making it easy to use in almost any reference ? Operating Current of 10?A to 20mA application. The wide dynamic operating range allows its use with widely varying supplies with excellent ? 1? Dynamic Impedance regulation. ? Low Temperature Coefficient ? Low Voltage Reference?1.235V The extremely low power drain of the LM185-1.2-N makes it useful for micropower circuitry. This voltage ? 2.5V Device and Adjustable Device Also reference can be used to make portable meters, Available regulators or general purpose analog circuitry with ? LM185-2.5 Series and LM185 Series, battery life approaching shelf life. respectively

LM386 Low Voltage Audio Power Amplifier IC DIP-8 Package

19.00
The LM386 is power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200.The inputs are ground referenced while the output automatically biases to one-half the supply voltage.

LM386N-1

111.00
Battery Operation ? Minimum External Parts ? Wide Supply Voltage Range: 4 V?12 V or 5 V?18 V ? Low Quiescent Current Drain: 4 mA ? Voltage Gains from 20 to 200 ? Ground-Referenced Input ? Self-Centering Output Quiescent Voltage ? Low Distortion: 0.2% (AV = 20, VS = 6 V, RL = 8 ?, PO = 125 mW, f = 1 kHz) ? Available in 8-Pin MSOP Package

LM3886 68W High Performance Audio Power Amplifier IC TO-220-11 Package

450.00
The LM3886 is a high-performance audio power amplifier capable of delivering 68W of continuous average power to a 4? load and 38W into 8? with 0.1% THD N from 20Hz?20kHz.

LM3900D

80.00
 Wide Range of Supply Voltages, Single or Dual Supplies  Wide Bandwidth  Large Output Voltage Swing  Output Short-Circuit Protection  Internal Frequency Compensation  Low Input Bias Current  Designed to Be Interchangeable With National Semiconductor LM2900 and LM3900, Respectively description These devices consist of four independent, highgain frequency-compensated Norton operational amplifiers that were designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is also possible. The low supply current drain is essentially independent of the magnitude of the supply voltage. These devices provide wide bandwidth and large output voltage swing. The LM2900 is characterized for operation from ?40?C to 85?C, and the LM3900 is characterized for operation from 0?C to 70?C.

LM3900N

40.00
Wide Range of Supply Voltages, Single or Dual Supplies  Wide Bandwidth  Large Output Voltage Swing  Output Short-Circuit Protection  Internal Frequency Compensation  Low Input Bias Current  Designed to Be Interchangeable With National Semiconductor LM2900 and LM3900, Respectively description These devices consist of four independent, highgain frequency-compensated Norton operational amplifiers that were designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is also possible. The low supply current drain is essentially independent of the magnitude of the supply voltage. These devices provide wide bandwidth and large output voltage swing. The LM2900 is characterized for operation from ?40?C to 85?C, and the LM3900 is characterized for operation from 0?C to 70?C.

LM3914 Dot/Bar Display Driver IC DIP-18 Package

78.00
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resistors.

LM3914V/NOPB

310.00
LED Lighting Drivers DOT/BAR DISPLAY DRVR

LM3915 LED Dot/Bar Display Driver IC DIP-18 Package

72.00
The LM3915 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDS, LCDs or vacuum fluorescent displays, providing a logarithmic 3 dB/step analog display.

LM393 Low Power Low Offset Voltage Dual Comparator IC DIP-8

12.00
The LM193 series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0 mV max for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage. Application areas include limit comparators, simple analog to digital converters; pulse, squarewave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high voltage digital logic gates.