L7812ABV
The L78 series of three-terminal positive regulators is available in TO-220,
TO-220FP, D?PAK and DPAK packages and several fixed output voltages, making it
useful in a wide range of applications.
These regulators can provide local on-card regulation, eliminating the distribution
problems associated with single point regulation. Each type embeds internal current
limiting, thermal shut-down and safe area protection, making it essentially
indestructible. If adequate heat sinking is provided, they can deliver over 1 A output
current. Although designed primarily as fixed voltage regulators, these devices can
be used with external components to obtain adjustable voltage and currents.
L9177ATR, PMIC
LDK220M33R 200 mA low quiescent current
LDK220M36R Voltage Regulators 200 mA
LF156H/883Q
The LFx5x devices are the first monolithic JFET input
Monolithic Amplifiers operational amplifiers to incorporate well-matched,
? New Output Stage Allows Use of Large high-voltage JFETs on the same chip with standard
Capacitive Loads (5,000 pF) Without Stability bipolar transistors (BI-FET? Technology). These
Problems amplifiers feature low input bias and offset
currents/low offset voltage and offset voltage drift,
? Internal Compensation and Large Differential coupled with offset adjust, which does not degrade Input Voltage Capability drift or common-mode rejection. The devices are also
? Common Features designed for high slew rate, wide bandwidth,
? Low extremely fast settling time, low voltage and current Input Bias Current: 30 pA
noise and a low 1/f noise corner
LF351 Wide Bandwidth JFET Input Op-Amp IC DIP-8
The LF351 is a low cost high speed JFET input operational amplifier with an internally trimmed input offset voltage (BI-FET IITM technology). The device requires a low supply current and yet maintains a large gain bandwidth product and a fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The LF351 is pin compatible with the standard LM741 and uses the same offset voltage adjustment circuitry. This feature allows designers to immediately upgrade the overall performance of existing LM741 designs. The LF351 may be used in applications such as high speed integrators, fast D/A converters, sample-and-hold circuits and many other circuits requiring low input offset voltage, low input bias current, high input impedance, high slew rate and wide bandwidth
LF353 Wide Bandwidth Dual JFET Input Op-Amp IC DIP-8 Package
This LF353 device is a low-cost, high-speed, JFET input operational amplifier with very low input offset voltage. It requires low supply current yet maintains a large gain-bandwidth product and a fast slew rate. In addition, the matched high-voltage JFET input provides very low input bias and offset currents. The LF353 can be used in applications such as high speed integrators, digital-to-analog converters, sample-and-hold circuits, and many other circuits. The LF353 is characterized for operation from 0?C to 70?C.
LF353H
This LF353 device is a low-cost, high-speed, JFETinput operational amplifier with very low input offset
voltage. It requires low supply current yet maintains a
large gain-bandwidth product and a fast slew rate. In
addition, the matched high-voltage JFET input
provides very low input bias and offset currents.
The LF353 can be used in applications such as highspeed integrators, digital-to-analog converters,
sample-and-hold circuits, and many other circuits.
The LF353 is characterized for operation from 0?C to
70?C.
LF356 JFET Input Op-Amp IC DIP-8
The LF356 device are the first monolithic JFET input operational amplifiers to incorporate well matched, high-voltage JFETs on the same chip with standard bipolar transistors (BI-FET? Technology). These amplifiers feature low input bias and offset currents/low offset voltage and offset voltage drift, coupled with offset adjust, which does not degrade drift or common-mode rejection. The devices are also designed for high slew rate, wide bandwidth, extremely fast settling time, low voltage and current noise and a low 1/f noise corner.
