View cart “BAV70LT1G” has been added to your cart.
PTS645SH50SMTR9
Electrical
CONTACT RATING: 50 mA @ 12 V DC.
DIELECTRIC STRENGTH: 250 V AC min.
CONTACT RESISTANCE: 100 mā¦ max. initial.
INSULATION RESISTANCE: 10 ā¦ min.
Environmental
OPERATING TEMPERATURE: -20 ĢC to 60 ĢC
Mechanical
ACTUATION FORCE: PTS645 models: 130 grams, 160 grams,
200 grams, 260 grams
LIFE EXPECTANCY: 100,000 operations.
Specification
FUNCTION: Momentary action
CONTACT ARRANGEMENT: SPST, N.O.
TERMINALS: PC pins
Process
SOLDERING: Preheating to 100 ĢC for 45 sec. max. Keep flux flush
with top surface of PCB; do not apply to component side of PCB
and area where terminals are located. Soldering to 255 ĢC for 5 sec.
max. Clean by brushing on solder surface. Do not clean switch with
solvents.
Packaging
Bulk packaging.
Tape & reel for the SMT type:
Reel of 1,000 pieces
SKU:
CMD-0004
Category: DIODES
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisqueĀ vestibulum amet elit ut volutpat.
Related products
1.5SMC33CA
₹35.00
The 1.5SMC series was intended to safeguard critical electrical items against voltage transients caused by lightning and other transient voltage phenomena
Features
ā¢ 1500W peak pulse power capability at 10/1000s waveform, repetition rate (duty cycles):0.01%
ā¢ Excellent clamping capability
ā¢ Low incremental surge resistance
ā¢ Typical IR less than 1A when VBR min>12V
ā¢ Excellent clamping capability
ā¢ Low incremental surge resistance
ā¢ Typical IR less than 1A when VBR min>12V
ā¢ For surface mounted applications to optimise board space
ā¢ Low profile package
ā¢ Built-in strain relief
ā¢ Typical failure mode is short from over-specified voltage or current
ā¢ Whisker test is performed in accordance with JEDEC JESD201A table 4a and 4c
ā¢ IEC 61000-4-2 ESD 30kV (Air), 30kV (Contact)
Applications
TVS devices are essential to safeguard I/O interfaces, VCC buses, and other susceptible circuits in telecom, computer, and industrial applications.
1n4007 diode (Pack of 100)
₹100.00
The 1N4007 is the most commonly used rectifier diode. It is commonly used in rectifier circuits, protection circuits and regulator circuits. The lead near to the silver line is the cathode and the other lead is anode, current is allowed to flow only form anode to cathode. The specifications of the 1N4007 diode are:
Manufacturer Product Number:1N4007
Description: DIODE GEN PURP 1KV 1A DO41
Detailed Description: Diode 1000 V 1A Through Hole DO-41
BAV70LT1G
₹125.00
Switching Diodes as a product
SMD/SMT mounting style
Peak Reverse Voltage: SOT-23-3 Package/Case: 70 V
Surge current maximum: 0.5 A
If: 200 mA Forward Current
Configuration: 1.25 V for the forward voltage, 6 ns for the reverse current, and 1.25 V for the forward current.
-55 C is the minimum operating temperature.
150 C is the maximum operating temperature.
Series: BAV70L
Containers: Reel
Cut tape for packaging
Containers: Mouse Reel
0.94 mm in height; 2.9 mm in length.
General-purpose, power, switching diodes are the product kind.
Diodes and rectifiers is a subcategory.
Switching diode, type
1.3 mm in width, 1.400 g in total
m7 diode (1n4007) (Pack of 100)
₹100.00
The M7(1N4007) Diode is aĀ Ā M7 Surface Mount General Rectifier and has a Plastic Passivation Junction Reverse Voltage of 50 to 1000 Volts with Forward Current of 1.0 Ampere.
m7 diode datasheet
P6KE30A Diode (Pack of 100)
₹500.00
Features of P6KE30A
ā Peak pulse power: 600 W (10/1000 Āµs )
ā Stand-off voltage range 6.8 to 440 V
ā Unidirectional and bidirectional types
ā Low clamping factor
ā Fast response time
ā UL recognized
Applications of P6KE30A
Features include bidirectional and unidirectional kinds, a peak pulse power of 600 W (10/1000 s), and a stand-off voltage range of 6.8 to 440 V.
Low clamping factor, quick reaction, and UL recognition
P6SMB16A
₹30.00
The P6SMB series was created to protect sensitive electronic equipment against voltage transients such as those due to lightning and other transient voltage occurrences.
TVS devices are perfect for securing I/O interfaces, buses, and other susceptible circuits in Telecom, Computer, Industrial, and Consumer Electronics applications
Case:DO-214AA (SMB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant and commercial grade
Base P/NHE3 - RoHS compliant and AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified(ā_Xā denotes revision code e.g. A, B, .....)
Terminals:
Matte tin plated leads, solder able per J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test
Polarity:
For uni-directional types the band denotes
cathode end, no marking on bi-directional types
SMAZ15-13-F (Pack of 100)
₹500.00
Case: SMA
Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020C
Terminals: Lead Free Plating (Matte Tin Finish). Solder able per MIL-STD-202, Method 208
Marking: Marking & Date Code (See Page 2)
Polarity: Cathode Notch or Cathode Band
Weight: 0.064 grams (approximate)
Features
1.0W Power Dissipation
Ideally Suited for Automatic Assembly
5.1V - 39V Nominal Zener Voltage Range
Standard VZ Tolerance is Ā± 5%
Lead Free Finish/RoHS Compliant
SPU03L-05
₹35.00
3 W DC- DC Unregulated Single Output Converter
Features
I/O isolation at 3000VDC
SMD technology is used internally.
Short circuit protection: built-in EMI filter
Free air convection cooling
Case made of non-conductive plastic
Packaged in a single line
Burn-in test with 100 percent of the load
Low price / high dependability
Warranty period: 2 years
Reviews
There are no reviews yet.