TIP41C Transistor (Pack of 10)
₹150.00
TIP41C is a three layer NPN device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector emitter voltage VCE.
500 in stock
Description
TIP41C is a base island technology NPN power transistor in TO-220 plastic package that make this device suitable for audio, power linear and switching applications. The complementary PNP type is TIP42C.
Features of tip41c transistor
- Low saturation voltage
- Simple drive requirements
- High safe operating area
- For low distortion complementary designs
- Easy to carry and handle
Applications of tip41c transistor
- General purpose circuits
- Audio amplifier
- Power linear and switching
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
IC LM311N
LM111 series of voltage comparators have input currents that are about a 100 times lower than the A710. They're made to work with a larger range of supply voltages, ranging from normal 15 V op amp supplies to a single 3 V supply. RTL, DTL, and TTL circuits, as well as MOS circuits, can use their output. They can also power bulbs or relays with changing voltages up to 50 V and currents up to 50 mA. The LM111 series' inputs and outputs can both be separated from system ground, and the output can drive loads connected to ground, positive supply, or negative supply. There is offset equalization and strobe functionality, and wire-O Red outputs are available.
- Manufacturer: Texas Instruments
- Manufacturer Part Number:LM311N/NOPB
- Description: IC VOLTAGE COMPARATOR 8-DIP
- Detailed Description: Comparator General Purpose DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL 8-PDIP
ILX3232DT Interface Transceiver IC
- Brand: IK Semiconductor
- Mounting Type:SMD
- Part Number: ILX3232DT
- Package: SO/SOIC
IK Semiconductor SMD ILX3232DT Interface Transceiver IC
ILX3232 is a 3.3V powered EIA/TIA-232 and V.28/V.24 communication interface with low power requirements, high data-rate capabilities. ILX3232 has a proprietary low dropout transmitter output stage providing true RS-232 performance from 3.3vVto 5.5V supplies. The device requires only four small 0.1 ?F standard external capacitors for operations from 3.3V supply. ILX3232 has two receivers and two drivers. The device is guaranteed to run at data rates of 120Kbps while maintaining RS-232 output levels. Typical applications are Notebook, Subnotebook and Palmtop Computers, Battery Powered Equipment, Hand-Held Equipment, Peripherals and Printers. ILX3232D Datasheet
IR2110 High and Low Side Driver IC DIP-14 Package
IR2110 High And Low Side Driver IC ? DIP-14 Package
IR2110/IR2113 are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. Logic inputs are compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high-frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 500 or 600 volts. IR2110(S)PbF/IR2113(S)PbF.- Part Number?IR2110
- Manufacturer? Infineon Technologies
- Description:IC GATE DRVR HALF-BRIDGE 16SOIC
MIC29302WU
MIC29150/29300/29500/29750 are voltage regulators with high current, high precision, and minimal dropout. These regulators have typical dropout voltages of 350mV to 425mV (full load) and exceptionally low ground current thanks to Micrel's unique Super eta PNP? technology with a PNP pass element. These devices are designed for large current loads, but they can also be used in lower current, highly low dropout-critical systems, where their small dropout voltage and ground current values are significant.
Overcurrent faults, reversed input polarity, reversed lead insertion, overtemperature operation, and positive and negative transient voltage spikes are all adequately protected in the MIC29150/29300/29500/29750. The five-pin fixed voltage versions have logic level ON/OFF control as well as an error flag that signals when the output is out of regulation. Low input voltage (dropout), output current limit, overtemperature shutdown, and extremely high overvoltage on the input are all flagged states.
If the ENABLE pin on the MIC29xx1 and MIC29xx2 is not required for ON/OFF control, it can be linked to VIN. 3-pin and 5-pin TO-220 and surface mount TO-263 (D2Pak) packaging are available for the MIC29150/29300/29500. Three-pin and five-pin TO-247 packages are offered for the MIC29750 7.5A regulators. The MIC29152 has a 1.5A adjustable output and is packaged in a 5-pin power D-Pak (TO-252) box. See MIC37xxx LDOs for applications with input voltages of 6V or less.
Manufacturer:MICROCHIP
Part No:MIC29302WU
MIC29302WU Datasheet
NE556 IC – Dual Timer IC
NE556 IC devices provide two independent timing circuits of the NE555 ?type in each package. These circuits can be operated in the a stable or the monostable mode with external resistor-capacitor (RC) timing control. The basic timing provided by the RC time constant can be controlled actively by modulating the bias of the control-voltage input. The threshold (THRES) and trigger (TRIG) levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by using the control voltage (CONT) terminal. When the trigger input falls below trigger level, the flip-flop is set and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset, and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset and the output goes low. When the output is low, a low-impedance path is provided between the discharge (DISCH) terminal and ground (GND).
NE556 IC Datasheet
TIP35C Transistor (Pack of 10)
TIP35C from STMicroelectronics is a through hole complementary power transistor in TO-247 package. This device manufactured in planar technology with "base island" layout resulting in exceptional high gain performance coupled with very low saturation voltage and suitable for general purpose linear and switching applications.
Manufacturer: STMICROELECTRONICS
Part No: TIP35C
TIP35C Datasheet
TIP36C Transistor (Pack of 10)
TIP36C PNP Power Amplifier Transistor 100V 25A TO-247 Package
TIP36C is a three layer PNP device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector emitter voltage VCE. Manufacturer: STMICROELECTRONICS Manufacturer Part No: TIP36C tip36c Datasheet
TIP42C Transistor (Pack of 10)
TIP41C is a base island technology NPN power transistor in TO-220 plastic package that make this device suitable for audio, power linear and switching applications. The complementary PNP type is TIP42C.
TIP41Cand TIP42CComplementary power transistors. Features Complementary PNP-NPN devices New enhanced series High switching speed hFE grouping hFE improved linearity321ApplicationsTO-220 General purpose circuits Audio amplifier
- Mfr. No: TIP42C
- Mfr.:STMicroelectronics
- Description: Bipolar Transistors - BJT PNP Gen Pur Power Complete Your Design
Reviews
There are no reviews yet.