TIP32C Pnp Transistor (Pack of 10)
₹150.00
TIP32C PNP POWER TRANSISTOR (100V 3A 40W TO220)
TIP32C is a silicon Epitaxial-base PNP power transistor in Jedec TO-220 plastic package. It is intented for use in medium power linear and switching applications.
The TIP32 is a PNP Power transistor. Since it has high collector current of about 2A it can be used for Power switching or large signal amplification.The transistor is mainly known for its high amplification capacity since 2A is not much of a higher capacity.
Description
Features of tip32c transistor
- Medium-power PNP Transistor
- DC Current Gain (hFE) 10 to 50
- Continuous Collector current (IC) is 3A
- Collector-Emitter voltage (VCE) is 100 V
- Collector-Base voltage (VCB) is 100V
- Emitter Base Voltage (VBE) is 5V
- Available in To-220 Package
Applications of tip32c transistor
- high current switching (upto 2A) loads
- Can be used as medium Power switches
- Large signal amplification
- Speed control of Motors
- Half bridge circuits
- Inverter and other rectifier circuits
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
ILX3232DT Interface Transceiver IC
- Brand: IK Semiconductor
- Mounting Type:SMD
- Part Number: ILX3232DT
- Package: SO/SOIC
IK Semiconductor SMD ILX3232DT Interface Transceiver IC
ILX3232 is a 3.3V powered EIA/TIA-232 and V.28/V.24 communication interface with low power requirements, high data-rate capabilities. ILX3232 has a proprietary low dropout transmitter output stage providing true RS-232 performance from 3.3vVto 5.5V supplies. The device requires only four small 0.1 ?F standard external capacitors for operations from 3.3V supply. ILX3232 has two receivers and two drivers. The device is guaranteed to run at data rates of 120Kbps while maintaining RS-232 output levels. Typical applications are Notebook, Subnotebook and Palmtop Computers, Battery Powered Equipment, Hand-Held Equipment, Peripherals and Printers. ILX3232D Datasheet
LM348N
LM148, LM248, and LM348 are quadruple, independent, high-gain, internally compensated operational amplifiers designed to have operating characteristics similar to the ?A741. These amplifiers exhibit low supply-current drain and input bias and offset currents that are much less than those of the ?A741.
- Manufacturer:Texas Instruments
- Manufacturer Part Number: LM348N
- Description: IC OPAMP GP 4 CIRCUIT 14DIP
- Detailed Description: General Purpose Amplifier 4 Circuit 14-PDIP
MAX485CPA
MAX481, MAX483, MAX485, MAX487?MAX491, and MAX1487 are low-power transceivers for RS-485 and RS422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps.
The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps. These transceivers draw between 120?A and 500?A of supply current when unloaded or fully loaded with disabled drivers. Additionally, the MAX481, MAX483, and MAX487 have a low-current shutdown mode in which they consume only 0.1?A. All parts operate from a single 5V supply.
Manufacturer: Analog Devices Inc./Maxim Integrated
Manufacturer Product Number:MAX485CPA
Description: IC TRANSCEIVER HALF 1/1 8DIP
Detailed Description: 1/1 Transceiver Half RS422, RS485 8-PDIP
max485cpa datasheet
MIC29302WU
MIC29150/29300/29500/29750 are voltage regulators with high current, high precision, and minimal dropout. These regulators have typical dropout voltages of 350mV to 425mV (full load) and exceptionally low ground current thanks to Micrel's unique Super eta PNP? technology with a PNP pass element. These devices are designed for large current loads, but they can also be used in lower current, highly low dropout-critical systems, where their small dropout voltage and ground current values are significant.
Overcurrent faults, reversed input polarity, reversed lead insertion, overtemperature operation, and positive and negative transient voltage spikes are all adequately protected in the MIC29150/29300/29500/29750. The five-pin fixed voltage versions have logic level ON/OFF control as well as an error flag that signals when the output is out of regulation. Low input voltage (dropout), output current limit, overtemperature shutdown, and extremely high overvoltage on the input are all flagged states.
If the ENABLE pin on the MIC29xx1 and MIC29xx2 is not required for ON/OFF control, it can be linked to VIN. 3-pin and 5-pin TO-220 and surface mount TO-263 (D2Pak) packaging are available for the MIC29150/29300/29500. Three-pin and five-pin TO-247 packages are offered for the MIC29750 7.5A regulators. The MIC29152 has a 1.5A adjustable output and is packaged in a 5-pin power D-Pak (TO-252) box. See MIC37xxx LDOs for applications with input voltages of 6V or less.
Manufacturer:MICROCHIP
Part No:MIC29302WU
MIC29302WU Datasheet
STM32L431CBT6
stm32l431cbt6 devices are the ultra-low-power microcontrollers based on the high performance Arm? Cortex?-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm? single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
stm32l431cbt6 devices embed high-speed memories (Flash memory up to 256 Kbyte,64 Kbyte of SRAM), a Quad SPI flash memories interface (available on all packages) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix. The STM32L431xx devices embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, proprietary code readout protection and Firewall.
The devices offer a fast 12-bit ADC (5 Msps), two comparators, one operational amplifier, two DAC channels, an internal voltage reference buffer, a low-power RTC, one generalpurpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, four general-purpose 16-bit timers, and two 16-bit low-power timers.
Part No: STM32L431CBT6
Mfr.:STMicroelectronics
Description: ARM Microcontrollers - MCU Ultra-low-power FPU Arm Cortex-M4 MCU 80 MHz 128 Kbytes of Flash
STM32L431CBT6 Datasheet
TIP122 Transistor 100V 5A TO-220 Package (Pack of 10)
TIP122 is a Darlington pair NPN transistor
Its a TIP122 transistor. It functions like a normal NPN transistor, but since it has a Darlington pair inside it has a good collector current rating of about 5A and a gain of about 1000. It can also withstand about 100V across its collector- Emitter hence can be used to drive heavy loads. The Darlington pair inside this transistor is shown clearly as its internal circuit schematic below. As you can see, there are two transistors inside this TO-220 package in which the emitter of the first transistor is connected with the base of the second transistor and the collector of both transistors are connected together to form a Darlington pair. This increases the current gain and current rating of this transistor. TIP122 Datasheet:
TIP127 Transistor PNP Power 100V 5A TO-220 Package (Pack of 10)
TIP127 Low voltage PNP power Darlington transistor
The TIP127 Transistor is a silicon PNP Darlington transistor in a TO?220 type package designed for general purpose amplifier and low-speed switching applications. It has a high gain of 1000, a collector continuous current of 5A, and a Collector Emitter voltage of 100V. The base current for TIP127 transistor is about 120mA and the Emitter base voltage is 5V. TIP127 can switch loads up to 60V with a peak current of 8A and a continuous current of 5A. This makes it suitable for medium and high-power electronics like controlling motors, solenoids, or high-power LEDs. You can also check out other Power Transistors from TIP series such as TIP122 Transistor (NPN)- How to make mini audio amplifier use tip122 / tip127 transistor https://www.youtube.com/watch?v=Hw_xlWqo7yY
Reviews
There are no reviews yet.