TIP122 Transistor 100V 5A TO-220 Package (Pack of 10)
₹150.00
TIP122 is a Darlington pair NPN transistor
Its a TIP122 transistor. It functions like a normal NPN transistor, but since it has a Darlington pair inside it has a good collector current rating of about 5A and a gain of about 1000. It can also withstand about 100V across its collector- Emitter hence can be used to drive heavy loads. The Darlington pair inside this transistor is shown clearly as its internal circuit schematic below. As you can see, there are two transistors inside this TO-220 package in which the emitter of the first transistor is connected with the base of the second transistor and the collector of both transistors are connected together to form a Darlington pair. This increases the current gain and current rating of this transistor.
Description
Features of TIP122 NPN Transistor 100V 5A TO-220 Package:
- Darlington Medium-power NPN Transistor
- High DC Current Gain (hFE), typically 1000
- Continuous Collector current (IC) is 5A
- Collector-Emitter voltage (VCE) is 100 V
- Collector-Base voltage (VCB) is 100V
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 120mA
- Available in To-220 Package
Specifications of TIP122 Transistor :
- Arrangement: Single
- Polarity of a transistor: NPN
- Voltage of the Collector-Emitter VCEO Max: 100 V
- Base-Emitter Voltage VEBO: 5 V
- Voltage at the Collector-Base End VCBO: 100 V
- Maximum direct current 5 A Collector Current
- 200 uA is the maximum collector cut-off current.
- Through-Hole mounting style
- Package/Case: TO-220-3
- 150 C is the high operating temperature.
- Series: TIP122 Transistor
- Packaging: Tube
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
IC LM311N
LM111 series of voltage comparators have input currents that are about a 100 times lower than the A710. They're made to work with a larger range of supply voltages, ranging from normal 15 V op amp supplies to a single 3 V supply. RTL, DTL, and TTL circuits, as well as MOS circuits, can use their output. They can also power bulbs or relays with changing voltages up to 50 V and currents up to 50 mA. The LM111 series' inputs and outputs can both be separated from system ground, and the output can drive loads connected to ground, positive supply, or negative supply. There is offset equalization and strobe functionality, and wire-O Red outputs are available.
- Manufacturer: Texas Instruments
- Manufacturer Part Number:LM311N/NOPB
- Description: IC VOLTAGE COMPARATOR 8-DIP
- Detailed Description: Comparator General Purpose DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL 8-PDIP
NE556 IC – Dual Timer IC
NE556 IC devices provide two independent timing circuits of the NE555 ?type in each package. These circuits can be operated in the a stable or the monostable mode with external resistor-capacitor (RC) timing control. The basic timing provided by the RC time constant can be controlled actively by modulating the bias of the control-voltage input. The threshold (THRES) and trigger (TRIG) levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by using the control voltage (CONT) terminal. When the trigger input falls below trigger level, the flip-flop is set and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset, and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset and the output goes low. When the output is low, a low-impedance path is provided between the discharge (DISCH) terminal and ground (GND).
NE556 IC Datasheet
TIP31C Transistor (Pack of 10)
TIP31C NPN Bipolar Power Transistor 100V 3A TO-220 Package
TIP31C is a three layer NPN device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector emitter voltage VCE. The TIP31C is a base island technology NPN power transistor in TO-220 plastic package with better performances than the industry standard TIP31C that make this device suitable for audio, power linear and switching applications. The PNP type is TIP32C. tip31c datasheet
TIP32C Pnp Transistor (Pack of 10)
TIP32C PNP POWER TRANSISTOR (100V 3A 40W TO220)
TIP32C is a silicon Epitaxial-base PNP power transistor in Jedec TO-220 plastic package. It is intented for use in medium power linear and switching applications. The TIP32 is a PNP Power transistor. Since it has high collector current of about 2A it can be used for Power switching or large signal amplification.The transistor is mainly known for its high amplification capacity since 2A is not much of a higher capacity. Tip32c Datasheet
TIP36C Transistor (Pack of 10)
TIP36C PNP Power Amplifier Transistor 100V 25A TO-247 Package
TIP36C is a three layer PNP device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector emitter voltage VCE. Manufacturer: STMICROELECTRONICS Manufacturer Part No: TIP36C tip36c Datasheet
TIP41C Transistor (Pack of 10)
TIP41C is a three layer NPN device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector emitter voltage VCE.
tip41c datasheet
TIP42C Transistor (Pack of 10)
TIP41C is a base island technology NPN power transistor in TO-220 plastic package that make this device suitable for audio, power linear and switching applications. The complementary PNP type is TIP42C.
TIP41Cand TIP42CComplementary power transistors. Features Complementary PNP-NPN devices New enhanced series High switching speed hFE grouping hFE improved linearity321ApplicationsTO-220 General purpose circuits Audio amplifier
- Mfr. No: TIP42C
- Mfr.:STMicroelectronics
- Description: Bipolar Transistors - BJT PNP Gen Pur Power Complete Your Design
Reviews
There are no reviews yet.