NE556 IC – Dual Timer IC
₹27.00
NE556 IC devices provide two independent timing circuits of the NE555 ?type in each package. These circuits can be operated in the a stable or the monostable mode with external resistor-capacitor (RC) timing control. The basic timing provided by the RC time constant can be controlled actively by modulating the bias of the control-voltage input. The threshold (THRES) and trigger (TRIG) levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by using the control voltage (CONT) terminal. When the trigger input falls below trigger level, the flip-flop is set and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset, and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset and the output goes low. When the output is low, a low-impedance path is provided between the discharge (DISCH) terminal and ground (GND).
1000 in stock (can be backordered)
Description
Features of NE556 IC ? Dual Timer IC
- Two Precision Timing Circuits Per Package
- Astable or Monostable Operation
- TTL-Compatible Output Can Sink or Source up to 150 mA
- Active Pull up or Pull down
- Designed to Be Interchangeable With Signetics NE556
Specification of NE556 IC – Dual timer IC
| Symbol | Parameter | Min | Max | Unit |
| VCC | Supply voltage | 4.5 | 16 | V |
| VI | Input voltage | vcc | V | |
| IO | Output current | ?200 | mA | |
| TA | Operating free-air temperature | 0 | 70 | ?C |
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
DS1225AB-200+
The DS1225AB and DS1225AD are 65,536-bit nonvolatile SRAMs that are structured as 8192 words by 8 bits. Each NV SRAM contains its own lithium energy source as well as control circuitry that constantly monitors VCC for out-of-tolerance conditions. When this occurs, the lithium energy source is automatically activated, and write protection is enabled unconditionally to avoid data corruption. The NV SRAMs can be used in place of existing 8k ? 8 SRAMs that are directly compatible with the common bytewide 28-pin DIP standard. The devices also have the same pinout as the 2764 EPROM and 2864 EEPROM, allowing for straightforward replacement while improving performance. The number of write cycles that can be performed is not limited, and no additional support circuitry is required for microprocessor connection.
DS1225AB-70+
The DS1225AB and DS1225AD are 65,536-bit nonvolatile SRAMs that are structured as 8192 words by 8 bits. Each NV SRAM contains its own lithium energy source as well as control circuitry that constantly monitors VCC for out-of-tolerance conditions. When this occurs, the lithium energy source is automatically activated, and write protection is enabled unconditionally to avoid data corruption. The NV SRAMs can be used in place of existing 8k ? 8 SRAMs that are directly compatible with the common bytewide 28-pin DIP standard. The devices also have the same pinout as the 2764 EPROM and 2864 EEPROM, allowing for straightforward replacement while improving performance. The number of write cycles that can be performed is not limited, and no additional support circuitry is required for microprocessor connection.
DS1225AD-70+
The DS1225AB and DS1225AD are 65,536-bit nonvolatile SRAMs that are structured as 8192 words by 8 bits. Each NV SRAM contains its own lithium energy source as well as control circuitry that constantly monitors VCC for out-of-tolerance conditions. When this occurs, the lithium energy source is automatically activated, and write protection is enabled permanently to avoid data corruption. The NV SRAMs can be used in place of conventional 8k ? 8 SRAMs that are directly compatible with the common byte wide 28-pin DIP standard. The devices also have the same pinout as the 2764 EPROM and 2864 EEPROM, allowing for direct replacement while improving performance. The amount of write cycles that can be performed is not limited, and no extra assistance circuitry is required for microprocessor connection.
DS1230Y-200+
The DS1230 256k Nonvolatile SRAMs have a capacity of 262,144 bits and are structured as 32,768 words by 8 bits. Each NV SRAM contains its own lithium energy source as well as control circuitry that constantly monitors VCC for out-of-tolerance conditions. When this occurs, the lithium energy source is automatically activated, and write protection is enabled unconditionally to avoid data corruption. The DS1230 DIP-package devices can be utilized in place of current 32k ? 8 static RAMs that directly comply to the common byte wide 28-pin DIP standard. The pinout of the DIP devices matches that of the 28256 EEPROMs, allowing for straightforward substitution while improving performance. The DS1230 devices in the Low Profile Module package are developed primarily for surface-mount applications. The amount of write cycles that can be performed is not limited, and no extra assistance circuitry is required for microprocessor connection.
DS1307 IC – Real Time Clock (RTC) IC
The DS1307 Serial Real-Time Clock is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially via a 2-wire, bi-directional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. The DS1307 has a built-in power sense circuit that detects power failures and automatically switches to the battery supply.
DS3231S – IC
DS3231 IC is a low-cost, extremely accurate I?C real-time clock (RTC) with an integrated temperature compensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input and maintains accurate timekeeping when the main power to the device is interrupted. The integration of the crystal resonator enhances the long-term accuracy of the device as well as reduces the piece-part count in a manufacturing line.
The DS3231 is available in commercial and industrial temperature ranges and is offered in a 16-pin, 300-mil SO package.
LM348N
LM148, LM248, and LM348 are quadruple, independent, high-gain, internally compensated operational amplifiers designed to have operating characteristics similar to the ?A741. These amplifiers exhibit low supply-current drain and input bias and offset currents that are much less than those of the ?A741.
- Manufacturer:Texas Instruments
- Manufacturer Part Number: LM348N
- Description: IC OPAMP GP 4 CIRCUIT 14DIP
- Detailed Description: General Purpose Amplifier 4 Circuit 14-PDIP
TIP127 Transistor PNP Power 100V 5A TO-220 Package (Pack of 10)
TIP127 Low voltage PNP power Darlington transistor
The TIP127 Transistor is a silicon PNP Darlington transistor in a TO?220 type package designed for general purpose amplifier and low-speed switching applications. It has a high gain of 1000, a collector continuous current of 5A, and a Collector Emitter voltage of 100V. The base current for TIP127 transistor is about 120mA and the Emitter base voltage is 5V. TIP127 can switch loads up to 60V with a peak current of 8A and a continuous current of 5A. This makes it suitable for medium and high-power electronics like controlling motors, solenoids, or high-power LEDs. You can also check out other Power Transistors from TIP series such as TIP122 Transistor (NPN)- How to make mini audio amplifier use tip122 / tip127 transistor https://www.youtube.com/watch?v=Hw_xlWqo7yY
Reviews
There are no reviews yet.