BP2335 DIP

Basic Information Full bridge drivers, or H-bridges, are what are used in brush motor applications. Each IC has an operating voltage range of 6V to 15V and a maximum output current of 2A. The output stage's MOS transistors enable PWM speed control. Motor driver ICs that have been discontinued can be directly replaced thanks to the inbuilt VREF voltage control mechanism. Low-power consumption designs are made possible by these incredibly efficient H-bridge driver ICs. Features Built-in Selectable Features Cross-Conduction Prevention Circuit, OCP, OVP, TSD, and UVLO Protection Circuits, One Channel or Two Channels Configuration, VREF Voltage Setting Pin Enables PWM Duty Control, and One or Two Channels Configuration.   Key Particulars Maximum Output Current: 0.5A, 1.0A, 2.0A; Output ON-Resistance: 1.5; PWM Input Frequency Range: 20kHz to 100kHz; Standby Current: 0A; Supply Voltage Range: 18V(Max); (Typ) -40?C to 85?C is the operating temperature range. Applications VTR, CD/DVD players, audiovisual gear, optical disc drives, PC add-ons, and OA equipment

The FT245RL is a USB to parallel FIFO interface with the following advanced features:-?Single chip USB to parallel FIFO bidirectional data transfer interface.Entire USB protocol handled on the chip.

The MAX7219/MAX7221 are compact, serial input/output common-cathode display drivers that interface microprocessors (?Ps) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs.

Nearly any Liquid Crystal Display (LCD)1 with modest multiplex rates may be interfaced with the PCF85162 peripheral device. Any static or multiplexed LCD with up to four backplanes and up to 32 segments can have its driving signals generated by this device. For bigger LCD applications, it is simply cascaded. The two-line bidirectional I2 C-bus is used by the PCF85162 for communication with the majority of microcontrollers. A display RAM with auto-incremented addressing, hardware sub addressing, and display memory switching (static and duplex drive modes) all reduce communication overheads. Features LCD controller and driver on a single chip Selectable display bias configuration: static, 12, or 13; Internal LCD bias generation with voltage-follower buffers; Selectable backplane drive configuration: static, 2, 3, or 4 backplane multiplexing; 32 segment drives: Up to 8 14-segment alphanumeric characters, up to 16 7-segment numeric characters, and up to 128 components of any image For storing display data, use 32 bits of RAM. Flexible flashing modes; switching between display memory banks in static and duplex driving modes; and independent supply for LCD and logic voltage Broad power supply range: 1.8 to 5.5 volts