1.5KE10A (pack of 10)
₹90.00
DESCRIPTION: TVS Diodes 1500W 8.55V Uni-Directional
Description
FEATURES:
- 1500W peak pulse capability at 10/1000Ī¼s waveform, repetition rate (duty cycles):0.01%
- Glass passivated chip junction in DO-201 Package
- Fast response time: typically less than 1.0ps from 0 Volts to BV min
- Excellent clamping capability
- Typical failure mode is short from over-specified voltage or current
- Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
- IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
- ESD protection of data lines in accordance with IEC 61000-4-2
- EFT protection of data lines in accordance with IEC 61000-4-4
- Low incremental surge resistance
- Typical IR less than 1Ī¼A when VBR min>12V
- High temperature to reflow soldering guaranteed: 260Ā°C/40sec / 0.375ā,(9.5mm) lead length, 5 lbs., (2.3kg) tension
- VBR @ TJ = VBR@25Ā°C x (1+Ī±T x (TJ – 25)) (Ī±T:Temperature Coefficient, typical value is 0.1%)
- Plastic package is flammability rated V-0 per Underwriters Laboratories
- Matte tin leadāfree plated
- Halogen free and RoHS compliant
- Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD- 609A.01)
Applications:
TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisqueĀ vestibulum amet elit ut volutpat.
Related products
1n4007 diode (Pack of 100)
The 1N4007 is the most commonly used rectifier diode. It is commonly used in rectifier circuits, protection circuits and regulator circuits. The lead near to the silver line is the cathode and the other lead is anode, current is allowed to flow only form anode to cathode. The specifications of the 1N4007 diode are:
Manufacturer Product Number:1N4007
Description: DIODE GEN PURP 1KV 1A DO41
Detailed Description: Diode 1000 V 1A Through Hole DO-41
1N5338BRLG
This is a comprehensive series of 5 Watt Zener diodes with strict limitations and improved operating characteristics that reflect silicon oxide passivated junctions' higher capabilities. All of this is contained in an axial lead, transfer molded plastic packaging that provides protection against the elements.
Features
ā¢ESD Rating of Class 3 (>16 kV) per Human Body Model ā¢Surge Rating of up to 180 W @ 8.3 ms ā¢Maximum Limits Assured on up to Six Electrical Parameters
ā¢Packages without pb are available
ADR381ARTZ-R2
The ADR380 and ADR381 are precise band gap voltage references with great accuracy, consistency, and low power consumption in a small footprint.
Temperature drift curvature correction procedures that are patented reduce the non - linearity of the voltage change with heat.
They are suited for 3 V to 5 V battery-powered applications because to their wide working range and low power consumption.
The ADR380 and ADR381 are low dropout voltage (LDV) micropower devices that deliver a consistent output voltage from suppliers as low as 300 mV above the output voltage. They are specified for the industrial temperature range (40Ā°C to 85Ā°C). The ADR380/ADR381 are available in the small three-lead SOT-23 package.
FEATURES
Initial precision: 5 mV/maximum 6 mV
Initial mistake in accuracy: 0.24 percent/ 0.24 percent
Low TCVOUT: maximum 25 ppm/Ā°C
70 ppm/mA load control
25 ppm/V line regulation
extensive operational ranges
2.4 V to 18 V for ADR380
2.8 V to 18 V for ADR381
120 A maximum for low power
5-mA high output current
Wide temperature range: 40 to 85 degrees Celsius
small 3-lead SOT-23 package with conventional pinout
APPLICATIONS
battery-operated equipment
portable medical devices
data collection methods
Control systems for industrial processes
a set of hard discs
Automotive
P6SMB16A
The P6SMB series was created to protect sensitive electronic equipment against voltage transients such as those due to lightning and other transient voltage occurrences.
TVS devices are perfect for securing I/O interfaces, buses, and other susceptible circuits in Telecom, Computer, Industrial, and Consumer Electronics applications
Case:DO-214AA (SMB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant and commercial grade
Base P/NHE3 - RoHS compliant and AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified(ā_Xā denotes revision code e.g. A, B, .....)
Terminals:
Matte tin plated leads, solder able per J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test
Polarity:
For uni-directional types the band denotes
cathode end, no marking on bi-directional types
SML4746-E3/61
Features
ā¢ For surface mounted applications
ā¢ Low Zener impedance
ā¢ Low regulation factor
ā¢ Plastic packaging has an underwriters laboratory flammability classification of 94 V-0.
ā¢ Standard voltage tolerance is 10%, suffix A is 5%, and high temperature soldering is guaranteed: 260 Ā°C/10 s at terminals
ā¢ Qualified to AEC-Q101
Reviews
There are no reviews yet.