MAX234CWE
The MAX220?MAX249 family of line drivers/receivers is
intended for all EIA/TIA-232E and V.28/V.24 communications
interfaces, particularly applications where ?12V is not
available.
The MAX225, MAX233, MAX235, and MAX245/MAX246/
MAX247 use no external components and are recommended
for applications where printed circuit board space is critical.
The MAX220-MAX249 are offered in 26 different packages
with temperatures from 0 to 70?C up to -55?C to 125?C.
See ordering information table at the end of the data
sheet for all package and temperature options.
MAX236EWG
The MAX220?MAX249 family of line drivers/receivers is
intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ?12V is
not available.
The MAX225, MAX233, MAX235, and MAX245/MAX246/
MAX247 use no external components and are
recommended for applications where printed circuit
board space is critical.
The MAX220-MAX249 are offered in 26 different packages with temperatures from 0 to 70?C up to -55?C to
125?C. See ordering information table at the end of the
data sheet for all package and temperature options.
MAX238CWG
The MAX220?MAX249 family of line drivers/receivers is
intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ?12V is
not available.
The MAX225, MAX233, MAX235, and MAX245/MAX246/
MAX247 use no external components and are
recommended for applications where printed circuit
board space is critical.
The MAX220-MAX249 are offered in 26 different packages with temperatures from 0 to 70?C up to -55?C to
125?C. See ordering information table at the end of the
data sheet for all package and temperature options.
MAX238CWG
The MAX220?MAX249 family of line drivers/receivers is
intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ?12V is
not available.
The MAX225, MAX233, MAX235, and MAX245/MAX246/
MAX247 use no external components and are
recommended for applications where printed circuit
board space is critical.
The MAX220-MAX249 are offered in 26 different packages with temperatures from 0 to 70?C up to -55?C to
125?C. See ordering information table at the end of the
data sheet for all package and temperature options.
MAX260BCNG
The MAX260/MAX261/MAX262 CMOS dual secondorder universal switched-capacitor active filters allow
microprocessor control of precise filter functions. No
external components are required for a variety of bandpass, lowpass, highpass, notch, and allpass configurations. Each device contains two second-order filter
sections that place center frequency, Q, and filter operating mode under programmed control.
An input clock, along with a 6-bit f0 program input,
determine the filter's center or corner frequency without
affecting other filter parameters. The filter Q is also programmed independently. Separate clock inputs for
each filter section operate with either a crystal, RC network, or external clock generator.
MAX3100CPD
The MAX3100 includes a crystal oscillator and a baudrate generator with software-programmable divider ratios
for all common baud rates from 300 baud to 230k baud.
A software- or hardware-invoked shutdown lowers quiescent current to 10?A, while allowing the MAX3100 to
detect receiver activity.
An 8-word-deep first-in/first-out (FIFO) buffer minimizes
processor overhead. This device also includes a flexible
interrupt with four maskable sources, including address
recognition on 9-bit networks. Two hardware-handshaking control lines are included (one input and one output).
The MAX3100 is available in 14-pin plastic DIP and small,
16-pin QSOP packages in the commercial and extended
temperature ranges.
MAX320CSA
The MAX320 series, powered from ?5V supplies, offers
35? max on-resistance (RON), 2? max matching
between channels, and 4? max RON flatness.
These switches also offer 5pC max charge injection
and a minimum of 2000V ESD protection per Method
3015.7.
For equivalent devices specified for single-supply operation, see the MAX323/MAX324/MAX325 data sheet.
For quad versions of these switches
MAX3221CAE
The MAX3221/MAX3223/MAX3243 achieve 1?A supply
current with Maxim?s revolutionary AutoShutdown?
feature. When the MAX3221/MAX3223/MAX3243 do not
sense a valid signal level on their receiver inputs, the onboard power supply and drivers shut down. This occurs
if the RS-232 cable is disconnected or if the transmitters
of the connected peripheral are turned off. The system
turns on again when a valid level is applied to any RS-232
receiver input.
The MAX3221/MAX3223/MAX3243 require only 0.1?F
capacitors in 3.3V operation, and can operate from input
voltages ranging from 3.0V to 5.5V
MAX323ESA
Low On-Resistance (RON), 60? max (33? typ)
? RON Matching Between Channels <2?
? RON Flatness <6? Max
? Guaranteed Charge Injection <5pC
? Single-Supply Operation ( 2.7V to 16V)
? Low Power Consumption, <5?W
? Low Leakage Current Over Temperature,
<2.5nA at 85?C
? Fast Switching: tON <150ns, tOFF <100ns
? Guaranteed Break-Before-Make (MAX325 only)
? TTL/CMOS Logic Compatible
MAX335CWG
These CMOS switches can operate continuously with
power supplies ranging from ?4.5V to ?20V and handle
rail-to-rail analog signals. Upon power-up, all switches are
off, and the internal serial and parallel shift registers are
reset to zero. The MAX335 is equivalent to two DG211
quad switches but controlled by a serial interface.
The interface is compatible with the Motorola SPI interface
standard. Functioning as a shift register, this serial interface
allows data (at DIN) to be locked in synchronous with the
rising edge of clock (SCLK). The shift register?s output
(DOUT) enables several MAX335s to be daisy chained
