LM201AN
The LM101A series are general purpose operational ? Improved Specifications include:
amplifiers which feature improved performance over
? Offset Voltage 3 mV Maximum Over industry standards like the LM709. Advanced
Temperature (LM101A/LM201A) processing techniques make possible an order of
? Input Current 100 nA Maximum Over magnitude reduction in input currents, and a redesign
Temperature (LM101A/LM201A) of the biasing circuitry reduces the temperature drift
of input current.
LM211D
The LM211D is voltage
comparators that have low input currents.
They are also designed to operate over a wide
range of supply voltages: from standard ?15V
operational amplifier supplies down to the single
5V supply used for IC logic.
Their output is compatible with RTL-DTL and TTL
as well as MOS circuits and can switch voltages
up to 50V at output currents as high as 50mA.
LM217L
The LM217L/LM317L are monolithic integrated
circuits in SO-8 and TO-92 packages intended for
use as positive adjustable voltage regulators.
They are designed to supply up to 100 mA of load
current with an output voltage adjustable over a
1.2 to 37 V range.The nominal output voltage is
selected by means of only a resistive divider,
making the device exceptionally easy to use and
eliminating the stocking of many fixed regulators.
LM234Z-6
Operates From 1V to 40V The sense voltage used to establish operating current
in the LM134 is 64mV at 25?C and is directly ? 0.02%/V Current Regulation proportional to absolute temperature (?K). The
? Programmable From 1?A to 10mA simplest one external resistor connection, then,
? True 2-Terminal Operation generates a current with ? 0.33%/?C temperature
dependence. Zero drift operation can be obtained by ? Available as Fully Specified Temperature
adding one extra resistor and a diode. Sensor
? ?3% Initial Accuracy
LM236H2.5
Low Temperature Coefficient The LM136-2.5-N series is useful as a precision 2.5V
low voltage reference for digital voltmeters, power ? Wide Operating Current of 400 ?A to 10 mA supplies or op amp circuitry. The 2.5V make it
? 0.2? Dynamic Impedance convenient to obtain a stable reference from 5V logic
? ?1% Initial Tolerance Available supplies. Further, since the LM136-2.5-N operates as
a shunt regulator, it can be used as either a positive ? Specified Temperature Stability
or negative voltage reference.
? Easily Trimmed for Minimum Temperature Drift
The LM136-2.5-N is rated for operation over ?55?C to ? Fast Turn-On
LM239D
This family of devices consists of four
independent precision-voltage comparators with
an offset voltage specification as low as 2 mV
maximum for LM339A, LM239A, and LM139A.
Each comparator has been designed specifically
to operate from a single power supply over a wide
range of voltages. Operation from split power
supplies is also possible.
These comparators also have a unique
characteristic in that the input common mode
voltage range includes ground even though
operated from a single power supply voltage.
LM239J
The LMx39-N series consists of four independent
1? Wide Supply Voltage Range
precision voltage comparators with an offset voltage
? LM139/139A Series 2 to 36 VDC or ?1 to ?18 VDC specification as low as 2 mV maximum for all four
? LM2901-N: 2 to 36 VDC or ?1 to ?18 VDC comparators. These comparators were designed
? LM3302-N: 2 to 28 V specifically to operate from a single power supply DC or ?1 to ?14 VDC
over a wide range of voltages. Operation from split
? Very Low Supply Current Drain (0.8 mA) ? power supplies is also possible and the low power Independent of Supply Voltage supply current drain is independent of the magnitude
? Low Input Biasing Current: 25 nA of the power supply voltage. These comparators also
? Low Input Offset Current: ?5 nA have a unique characteristic in that the input
common-mode voltage range includes ground, even ? Offset Voltage: ?3 mV though they are operated from a single power supply
? Input Common-Mode Voltage Range Includes voltage.
LM2575HVN-5.0 P+
The TL2575 and TL2575HV devices provide all the ? Fixed 3.3-V, 5-V, 12-V, and 15-V Options with
active functions needed for a step-down (buck) ?5% Regulation (Max) Over Line, Load, and switching regulator in an integrated circuit. They Temperature Conditions require four to six external components for operation.
? Adjustable Option With a Range of 1.23 V to 37 V They accept a wide input-voltage range of up to 60 V
(57 V for HV Version) and ?4% Regulation (Max) (TL2575-HV) and are available in fixed output
Over Line, Load, and Temperature Conditions voltages of 3.3 V, 5 V, 12 V, 15 V, or an adjustable-
? Specified 1-A Output Current output version. The TL2575 and TL2575HV devices
have an integrated switch capable of delivering 1 A of
? Wide Input Voltage Range load current, with excellent line and load regulation.
? 4.75 V to 40 V (60 V for HV Version) The device also offers internal frequency
? Requires Only Four External Components (Fixed compensation, a fixed-frequency oscillator, cycle-byVersions) and Uses Readily Available Standard cycle current limiting, and thermal shutdown. In
addition, a manual shutdown is available via an Inductors
external ON/OFF pin.
