OP97F
The OP97 is a low power alternative to the industry-standard
OP07 precision amplifier. The OP97 maintains the standards of
performance set by the OP07 while utilizing only 600 ?A supply
current, less than 1/6 that of an OP07. Offset voltage is an ultralow
25 ?V, and drift over temperature is below 0.6 ?V/?C. External
offset trimming is not required in the majority of circuits.
Improvements have been made over OP07 specifications in
several areas. Notable is bias current, which remains below
250 pA over the full military temperature range. The OP97 is
ideal for use in precision long-term integrators or sample-andhold circuits that must operate at elevated temperatures.
OPA132UAE4
The OPAx132 series of FET-input operational
1? FET input: IB = 50 pA Maximum
amplifiers provides highspeed and excellent DC
? Wide Bandwidth: 8 MHz performance. The combination of high slew rate and
? High Slew Rate: 20 V/?s wide bandwidth provide fast settling time. Single,
? Low Noise: 8nV/?Hz (1 kHz) dual, and quad versions have identical specifications
for maximum design flexibility. High performance
? Low Distortion: 0.00008%) grades are available in the single and dual versions.
? High Open-loop Gain: 130 dB (600-? load) All are ideal for general-purpose, audio, data
? Wide Supply Range: ?2.5 to ?18V acquisition and communications applications,
especially where high source impedance is ? Low Offset Voltage: 500 ?V Maximum
encountere
OPA2132UA
The OPAx132 series of FET-input operational
1? FET input: IB = 50 pA Maximum
amplifiers provides highspeed and excellent DC
? Wide Bandwidth: 8 MHz performance. The combination of high slew rate and
? High Slew Rate: 20 V/?s wide bandwidth provide fast settling time. Single,
? Low Noise: 8nV/?Hz (1 kHz) dual, and quad versions have identical specifications
for maximum design flexibility. High performance
? Low Distortion: 0.00008%) grades are available in the single and dual versions.
? High Open-loop Gain: 130 dB (600-? load) All are ideal for general-purpose, audio, data
? Wide Supply Range: ?2.5 to ?18V acquisition and communications applications,
especially where high source impedance is ? Low Offset Voltage: 500 ?V Maximum
encountered
OPA2237UA
DESCRIPTION
The OPA237 op amp family is one of Texas Instruments?
MicroAmplifier? series of miniature products. In addition
to small size, these devices feature low offset voltage, low
quiescent current, low bias current, and a wide supply
range. Single, dual, and quad versions have identical
specifications for maximum design flexibility. They are
ideal for single-supply, battery-operated, and
space-limited applications, such as PCMCIA cards and
other portable instruments.
OPA2277UA
The OPAx277 series precision operational amplifiers OPA4277
replace the industry standard OP-177. They offer PDIP (14) 6.35 mm ? 19.30 mm
improved noise, wider output voltage swing, and are (1) For all available packages, see the orderable addendum at
twice as fast with half the quiescent current. Features the end of the data sheet.
include ultralow offset voltage and drift, low bias
current, high common-mode rejection, and high 0.1 Hz to 10 Hz Noise
power supply rejection. Single, dual, and quad
versions have identical specifications, for maximum
design flexibility
OPA277U
Ultralow Offset Voltage: 10 ?V Unlike most operational amplifiers which are specified
? Ultralow Drift: ?0.1 ?V/?C at only one supply voltage, the OPAx277 series is
? High Open-Loop Gain: 134 dB specified for real-world applications; a single limit
applies over the ?5-V to ?15-V supply range. High
? High Common-Mode Rejection: 140 dB performance is maintained as the amplifiers swing to
? High Power Supply Rejection: 130 dB their specified limits. Because the initial offset voltage
? Low Bias Current: 1-nA maximum (?20 ?V maximum) is so low, user adjustment is
usually not required. However, the single version ? Wide Supply Range: ?2 V to ?18 V
(OPA277) provides external trim pins for special
? Low Quiescent Current: 800 ?A/amplifier applications.
? Single, Dual, and Quad Versions OPA277 operational amplifiers are easy to use and
? Replaces OP-07, OP-77, and OP-177
OPA4131PA
The OPA131 series of FET-input op amps provides high
performance at low cost. Single, dual, and quad versions in
industry-standard pinouts allow cost-effective design options.
The OPA131 series offers excellent general-purpose performance, including low offset voltage, drift, and good dynamic
characteristics.
Single, dual, and quad versions are available in DIP and SO
packages. Performance grades include commercial and industrial temperature ranges.
