PIC16F886-I/SP Microcontrollers
PIC16F886-I/SO ? PIC PIC? 16F Microcontroller IC??
Manufacturer: Microchip Technology Manufacturer Product Number: PIC16F886-I/SP Description: IC MCU 8BIT 14KB FLASH 28SOIC Detailed Description: PIC PIC? 16F Microcontroller IC 8-Bit 20MHz 14KB (8K x 14) FLASH 28-SOIC PIC16F886-I/SP Datasheet
PIC16F887 Microcontroller
PIC16F887 Microcontroller?is an 8-bit microcontroller
PIC16F887 Microcontroller?is an 8-bit microcontroller designed with RSIC CPU technology, which helps the microcontroller to give the maximum output using less power. It has a total of 40-pins and all these pins come in multiple packages to solve the requirement of small and modern circuits. 44 pin QFN and TQFP packages are also available. PIC16F887 provides all the modern protocol to the developers and due to its multiple pins, the most protocol can be followed at the same time without effecting others. The PIC has multiple usages with the industry and at commercial level due to its multiple A/D channels and internal clock.- LED projects using PIC16F877A -? https://www.youtube.com/watch?v=swepVjQxUTo
PIC16F887-I/PT
The PIC16F882/883/884/886/887 devices include a 13-bit program counter that can address memory regions for program that are 2K x 14 (0000h-07FFh) for the PIC16F882, 4K x 14 (0000h-0FFFh) for the PIC16F883/PIC16F884, and 8K x 14 (0000h-1FFFh) for the PIC16F886/PIC16F887. If you reach a location that is larger than these parameters, the original 8K x 14 space will wrap around. The reset vector is at 0000h, whereas the interrupt vector is at 0004h. The PIC16F87X MCUs each include three memory blocks. Program memory and data memory are connected by separate buses to enable concurrent access. The PIC16F87X MCUs each include three memory blocks. Program memory and data memory are connected by separate buses to enable concurrent access.
PIC17C44 Microcontroller
The PIC17C44?is a High-Performance 8-Bit CMOS EPROM/ROM Microcontroller .?The following are the features:-
? 33 I/O pins with individual direction control
? High current sink/source for direct LED drive - RA2 and RA3 are open drain, high voltage (12V), high current (60 mA), I/O
? Two capture inputs and two PWM outputs
- Captures are 16-bit, max resolution 160 ns
- PWM resolution is 1- to 10-bit
? TMR0: 16-bit timer/counter with 8-bit programmable prescaler
? TMR1: 8-bit timer/counter
PIC18F2525 Microcontroller
The PIC18F2525?is a 28/40/44-Pin Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology.?The following are the features:-
? Master Synchronous Serial Port (MSSP) module Supporting 3-Wire SPI (all 4 modes) and I2C? Master and Slave modes
? Enhanced Addressable USART module:
- Supports RS-485, RS-232 and LIN/J2602
- RS-232 operation using internal oscillator block (no external crystal required)
- Auto-wake-up on Start bit
- Auto-Baud Detect
? 10-Bit, up to 13-Channel Analog-to-Digital (A/D) Converter module: - Auto-acquisition capability - Conversion available during Sleep
? Dual Analog Comparators with Input Multiplexing
? Programmable 16-Level High/Low-Voltage Detection (HLVD) module:
- Supports interrupt on High/Low-Voltage Detection
PIC18F2550 Microcontroller
The PIC18F2550?is a 28/40/44-Pin, High-Performance, Enhanced Flash, USB Microcontrollers with nanoWatt Technology. The following are the features:-
? High-Current Sink/Source: 25 mA/25 mA
? Three External Interrupts
? Four Timer modules (Timer0 to Timer3)
? Up to 2 Capture/Compare/PWM (CCP) modules:
- Capture is 16-bit, max. resolution 5.2 ns (TCY/16)
- Compare is 16-bit, max. resolution 83.3 ns (TCY)
- PWM output: PWM resolution is 1 to 10-bit
? Enhanced Capture/Compare/PWM (ECCP) module:
- Multiple output modes
- Selectable polarity
- Programmable dead time
- Auto-shutdown and auto-restart
PIC18F25K22 Microcontroller
The PIC18F25K22?is a 28/40/44-Pin, Low-Power, High-Performance Microcontrollers with XLP Technology. The following are the features:-
- 24/35 I/O pins and 1 input-only pin:
- High current sink/source 25 mA/25 mA
- Individually programmable weak pull-ups
- Individually programmable interrupt-on-pin change
- Three external interrupt pins
- Up to seven Timer modules:
- Up to four 16-bit timers/counters with prescaler
- Up to three 8-bit timers/counters
- Dedicated, low-power Timer1 oscillator
