AMS1117-3.3
₹10.00
The adjustable and fixed voltage regulators of the AMS1117 series are designed to deliver 1A output current and function down to 1V input-to-output difference. The device’s dropout voltage is guaranteed to be 1.3V at maximum output current, dropping at lower load currents. Trimming on-chip adjusts the reference voltage to one percent. The current limit is also reduced, reducing stress on the regulator and energy source circuitry under overload conditions. The AMS1117 devices are pin compatible with existing three-terminal SCSI regulators and are available in low-profile surface mount SOT-223 packages, 8L SOIC packages, and TO-252 (DPAK) plastic packages.
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisqueĀ vestibulum amet elit ut volutpat.
Related products
MIC4576-5BU IC – Step Down Regulator IC
The MIC4576 is a series of easy-to-use fixed and adjustable BiCMOS step-down (buck) switch-mode voltage regulators. The 200 kHz MIC4576 duplicates the pinout and function of the 52 kHz LM2576. The higher switching frequency may allow up to a 2:1 reduction in output filter inductor size. The MIC4576 is available in 3.3V, and 5V fixed output versions or a 1.23V to 33V adjustable output version. Both versions are capable of driving a 3A load with excellent line and load regulation. The feedback voltage is guaranteed to Ā±2% tolerance for adjustable versions, and the output voltage is guaranteed to Ā±3% for fixed versions, within specified voltages and load conditions. The oscillator frequency is guaranteed to Ā±10%. In Shutdown mode, the regulator draws less than 200 ĀµA shutdown current. The regulator performs cycle-by-cycle current limiting and thermal shutdown for protection under fault conditions. This series of simple switch-mode regulators requires a minimum number of external components and can operate using a standard series of inductors. Frequency compensation is provided internally. The MIC4576 is available in TO-220 (T) and TO-263 (U) packages for the industrial temperature range.
LM1085-ADJ (LM1085) – 3A Adjustable Low Dropout (LDO) Positive Voltage Regulator
The LM1085 is a regulator with a maximum dropout of 1.5 V at 3 A of load current. It has the same pin-out as TIās industry standard LM317.
Two resistors are required to set the output voltage of the adjustable output voltage version of the LM1085. Fixed output voltage versions integrate the adjust resistors.
The LM1085 circuit includes a zener trimmed bandgap reference, current limiting and thermal shutdown.
LM7912 IC – 12V Negative Voltage Regulator IC
The LM7912 series of three-terminal negative regulators are available in the TO-220 package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut down, and safe operating area protection, making it essentially indestructible.
The LM337Ā is a Variable Negative Voltage Regulator that can output voltage from -1.25V to -37V with a maximum output current of -1.5A
REF02 IC – 5V Precision Voltage Reference IC
The REF02 are industry-standard precision voltage references. The 5V output REF02 can also be adjusted over a Ā±6% range. The 5V REF02 has a single-supply operation over an input voltage range of 7V to 33V. Both devices offer a low-current drain of 1mA. The REF02 also provides a TEMP pin whose output voltage varies linearly with temperature, making this device suitable for a wide variety of temperature-sensing and control applications. For new designs, refer to the MAX6035 or MAX6143 data sheets.
REF01 IC – 10V Precision Voltage Reference IC
The REF01 is industry-standard precision voltage references. The stable 10V output of the REF01 can be adjusted over a Ā±6% range with minimal effect on temperature stability. The 10V REF01 has a single-supply operation over an input voltage range of 13V to 33V. The devices offer a low-current drain of 1mA.
LM7806 IC – 6V Positive Voltage Regulator IC
The LM7806 series of three terminal positive regulators are available in the TO-220 package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut down and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents.
LM7909 IC – 9V Negative Voltage Regulator IC
Features of LM7909 IC
- LM7909 is -9V Negative Voltage Regulator
- Output Voltage: -9V
- OutputĀ Current: 1.5A
- Minimum Input Voltage is -12V
- Maximum Input Voltage is -35V
- Operating current(IQ) is 5mA
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum 125 degree Celsius
- Available in TO-220 package
Reviews
There are no reviews yet.