Potentiometer 2k 3590S 202
PTS645SH50SMTR9
Electrical
CONTACT RATING: 50 mA @ 12 V DC.
DIELECTRIC STRENGTH: 250 V AC min.
CONTACT RESISTANCE: 100 mā¦ max. initial.
INSULATION RESISTANCE: 10 ā¦ min.
Environmental
OPERATING TEMPERATURE: -20 ĢC to 60 ĢC
Mechanical
ACTUATION FORCE: PTS645 models: 130 grams, 160 grams,
200 grams, 260 grams
LIFE EXPECTANCY: 100,000 operations.
Specification
FUNCTION: Momentary action
CONTACT ARRANGEMENT: SPST, N.O.
TERMINALS: PC pins
Process
SOLDERING: Preheating to 100 ĢC for 45 sec. max. Keep flux flush
with top surface of PCB; do not apply to component side of PCB
and area where terminals are located. Soldering to 255 ĢC for 5 sec.
max. Clean by brushing on solder surface. Do not clean switch with
solvents.
Packaging
Bulk packaging.
Tape & reel for the SMT type:
Reel of 1,000 pieces
QC962-8A
QC962?is a hybrid integrated IGBT driver designed for driving N-channel IGBT modules in any gate amplifier application. The device provides the required electricalisolation between input and output with the opto-coupler. Short circuit protection is provided by a built-in desaturation detector. A fault signal is provided if the short circuit protection is activate.
QC962 IGBT Gate Driver?Features:-
- Built in high CMRR opto-coupler (CMR: Typical: 30kV/?s, Min.:15kV/?s)
- Two supply drive topology
- TTL compatible input interface
- Electrical isolation voltage between input and output with opto-couplers (Viso=3750VRMS/min)
- Built in short circuit protection circuit with in for fault output
- Soft IGBT turn-off and protection circuit time reset
- Controlled time detected short circuit
- Switching frequency up to 20kHz
- Pin and characteristic are compatible with M57962AL
QC962 IGBT Gate Driver?Applications:-
- General-purpose Inverter
- AC Servo Systems
- Unint erruptable Power Supplies(UPS)
- Welding Machines
QCA4020-0-217MSP-TR-0D-0
Features of QCA4020
- The QCA4020 tri-mode SoC combines 802.15.4, dual-band Wi-Fi, and Bluetooth 5 technologies.
- Low power, isolated 15.4 SW MAC, 15.4 and BLE drivers, coex management, and Wi-Fi operations processors (QCA4020 only)
- Secure boot, trusted execution environments, encrypted storage, key provisioning, and wireless protocol security are all features of cutting-edge hardware-based security.
- a full range of interfaces and peripherals, including SPI, UART, PWM, I2S, I2C, SDIO, ADC, and GPIOs.
- Low power sensor use cases are made possible by an integrated sensor hub for post-processing.
- Reduced package size enables improved form factors.
- Package Type - 11.2 x 11.2mm, 0.65mm pitch, 217-ball BGA (QCA4020)
- Application CPU : 1. Arm Cortex-M4F @ up to 128MHz 2. 32KB- L1 cache controller, XIP from external S-flash 3. Internal Memory: 300+KB RAM reserved for applications
- Connectivity/System CPU : 1. Dedicated processor for Bluetooth LE LC and 15.4 MAC 2. Dedicated processor for 802.11 a/b/g/n 3. Isolated Memory: RAM, ROM
- Low Power Bluetooth & 15.4 (Separate radios) : 1. Bluetooth v5.0, PA =+4dBm/+10dBm (for Long Range) 2. 802.15.4: 2006 compliant, 15.4e, 2.4GHz DSSS 3. +4dBm/+21dBm (for Long Range)
- Wi-Fi (QCA4020 only) : Dual Band, 1x1, HT20, MCS0-7, 2.4/5GHz, PA=+18dBm
- Sensor Hub : Low power HW+App CPU, Interface: I2C, SPI, ADC
- Display : Segmented or character display with SPI or I2C interfaces
- Interfaces : 1. 2C, UART, SPI/Q-SPI, ADC (8ch, 12-bit 1Msps) 2. PWM, SDIO2.0, USB2.0 HS, I2S, GPIOs
- Security 1. Secure boot, Secure Storage, HW Crypto Engine 2. HW ECC, 16-bit true random number generator 3. Trusted Execution Environment
- Direct Battery Connection : 1.8V-3.6V
REF01 IC – 10V Precision Voltage Reference IC
The REF01 is industry-standard precision voltage references. The stable 10V output of the REF01 can be adjusted over a ?6% range with minimal effect on temperature stability. The 10V REF01 has a single-supply operation over an input voltage range of 13V to 33V. The devices offer a low-current drain of 1mA.
REF02 IC – 5V Precision Voltage Reference IC
The REF02 are industry-standard precision voltage references. The 5V output REF02 can also be adjusted over a ?6% range. The 5V REF02 has a single-supply operation over an input voltage range of 7V to 33V. Both devices offer a low-current drain of 1mA. The REF02 also provides a TEMP pin whose output voltage varies linearly with temperature, making this device suitable for a wide variety of temperature-sensing and control applications. For new designs, refer to the MAX6035 or MAX6143 data sheets.
REF02AP
The REF02 is a precision 5V voltage reference. The drift is
laser trimmed to 10ppm/?C max over the extended industrial
and military temperature range. The REF02 provides a stable
5V output that can be externally adjusted over a ?6% range
with minimal effect on temperature stability. The REF02
operates from a single supply with an input range of 8V to 40V
with a very low current drain of 1mA, and excellent temperature
stability due to an improved design. Excellent line and load
regulation, low noise, low power, and low cost make the
REF02 the best choice whenever a 5V voltage reference is
required. Available package options are DIP-8 and SO-8. The
REF02 is an ideal choice for portable instrumentation,
temperature transducers, Analog-to-Digital (A/D) and Digitalto-Analog (D/A) converters, and digital voltmeters.
REF02C
The REF01/REF02 are industry-standard precision voltage references. The stable 10V output of the REF01
can be adjusted over a ?6% range with minimal effect
on temperature stability. The 5V output REF02 can also
be adjusted over a ?6% range. The 10V REF01 has a
single-supply operation over an input voltage range of
13V to 33V, while the 5V REF02 has a single-supply
operation over an input voltage range of 7V to 33V.
Both devices offer a low-current drain of 1mA. The
REF02 also provides a TEMP pin whose output voltage
varies linearly with temperature, making this device
suitable for a wide variety of temperature-sensing and
control applications. For new designs, refer to the
MAX6035 or MAX6143 data sheets.
REF02CP
The REF01/REF02 are industry-standard precision voltage references. The stable 10V output of the REF01
can be adjusted over a ?6% range with minimal effect
on temperature stability. The 5V output REF02 can also
be adjusted over a ?6% range. The 10V REF01 has a
single-supply operation over an input voltage range of
13V to 33V, while the 5V REF02 has a single-supply
operation over an input voltage range of 7V to 33V.
Both devices offer a low-current drain of 1mA. The
REF02 also provides a TEMP pin whose output voltage
varies linearly with temperature, making this device
suitable for a wide variety of temperature-sensing and
control applications. For new designs, refer to the
MAX6035 or MAX6143 data sheets.
