Showing 2305–2316 of 3972 results

LM3886 68W High Performance Audio Power Amplifier IC TO-220-11 Package

450.00
The LM3886 is a high-performance audio power amplifier capable of delivering 68W of continuous average power to a 4? load and 38W into 8? with 0.1% THD N from 20Hz?20kHz.

LM3900D

80.00
 Wide Range of Supply Voltages, Single or Dual Supplies  Wide Bandwidth  Large Output Voltage Swing  Output Short-Circuit Protection  Internal Frequency Compensation  Low Input Bias Current  Designed to Be Interchangeable With National Semiconductor LM2900 and LM3900, Respectively description These devices consist of four independent, highgain frequency-compensated Norton operational amplifiers that were designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is also possible. The low supply current drain is essentially independent of the magnitude of the supply voltage. These devices provide wide bandwidth and large output voltage swing. The LM2900 is characterized for operation from ?40?C to 85?C, and the LM3900 is characterized for operation from 0?C to 70?C.

LM3900N

40.00
Wide Range of Supply Voltages, Single or Dual Supplies  Wide Bandwidth  Large Output Voltage Swing  Output Short-Circuit Protection  Internal Frequency Compensation  Low Input Bias Current  Designed to Be Interchangeable With National Semiconductor LM2900 and LM3900, Respectively description These devices consist of four independent, highgain frequency-compensated Norton operational amplifiers that were designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is also possible. The low supply current drain is essentially independent of the magnitude of the supply voltage. These devices provide wide bandwidth and large output voltage swing. The LM2900 is characterized for operation from ?40?C to 85?C, and the LM3900 is characterized for operation from 0?C to 70?C.

LM3914 Dot/Bar Display Driver IC DIP-18 Package

78.00
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resistors.

LM3914V/NOPB

310.00
LED Lighting Drivers DOT/BAR DISPLAY DRVR

LM3915 LED Dot/Bar Display Driver IC DIP-18 Package

72.00
The LM3915 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDS, LCDs or vacuum fluorescent displays, providing a logarithmic 3 dB/step analog display.

LM393 Low Power Low Offset Voltage Dual Comparator IC DIP-8

12.00
The LM193 series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0 mV max for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage. Application areas include limit comparators, simple analog to digital converters; pulse, squarewave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high voltage digital logic gates.

LM393D

65.00
The LM393B and LM2903B devices are the next generation versions of the industry-standard LM393 and LM2903 comparator family. These next generation B-version comparators feature lower offset voltage, higher supply voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance and input ruggedness through dedicated ESD clamps. The LM393B and LM2903B can drop-in replace the LM293, LM393 and LM2903, for both "A" and "V" grades. All devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Quiescent current is independent of the supply voltage NEW LM393B and LM2903B ? Improved specifications of B-version ? Maximum rating: up to 38 V ? ESD rating (HBM): 2k V ? Low input offset: 0.37 mV ? Low input bias current: 3.5 nA ? Low supply-current: 200 ?A per comparator ? Faster response time of 1 ?sec ? Extended temperature range for LM393B ? Available in tiny 2 x 2mm WSON package ? B-version is drop-in replacement for LM293, LM393 and LM2903, A and V versions ? Common-mode input voltage range includes ground ? Differential input voltage range equal to maximumrated supply voltage: ?38 V ? Low output saturation voltage ? Output compatible with TTL, MOS, and CMOS

LM393H

112.00
Improved specifications of B-version ? Maximum rating: up to 38 V ? ESD rating (HBM): 2k V ? Low input offset: 0.37 mV ? Low input bias current: 3.5 nA ? Low supply-current: 200 ?A per comparator ? Faster response time of 1 ?sec ? Extended temperature range for LM393B ? Available in tiny 2 x 2mm WSON package ? B-version is drop-in replacement for LM293, LM393 and LM2903, A and V versions ? Common-mode input voltage range includes ground ? Differential input voltage range equal to maximumrated supply voltage: ?38 V ? Low output saturation voltage ? Output compatible with TTL, MOS, and CMOS

LM393N

99.00
The LM193-N series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0 mV max for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage.

LM393P

30.00
The LM393B and LM2903B devices are the next generation versions of the industry-standard LM393 and LM2903 comparator family. These next generation B-version comparators feature lower offset voltage, higher supply voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance and input ruggedness through dedicated ESD clamps. The LM393B and LM2903B can drop-in replace the LM293, LM393 and LM2903, for both "A" and "V" grades. All devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Quiescent current is independent of the supply voltage. ? NEW LM393B and LM2903B ? Improved specifications of B-version ? Maximum rating: up to 38 V ? ESD rating (HBM): 2k V ? Low input offset: 0.37 mV ? Low input bias current: 3.5 nA ? Low supply-current: 200 ?A per comparator ? Faster response time of 1 ?sec ? Extended temperature range for LM393B ? Available in tiny 2 x 2mm WSON package ? B-version is drop-in replacement for LM293, LM393 and LM2903, A and V versions ? Common-mode input voltage range includes ground ? Differential input voltage range equal to maximumrated supply voltage: ?38 V ? Low output saturation voltage ? Output compatible with TTL, MOS, and CMOS