LM346N Programmable Quad Bipolar Operational Amplifier IC DIP-16
The LM346 consists of four independent, high gain, internally compensated, low power programmable amplifiers. Two external resistors (Rset) allow the user to program the gain-bandwith product, slew rate, supply current, input bias current, input offset current and input noise. For example the user can trade-off supply current for bandwidth or optimize noise figure for a given source resistance. In a similar way other amplifier characteristics can be tailored to the application. Except for the two programming pins at the end of the package the LM346 pin out is the same as the LM324 and LM348
LM348D
?A741 Operating Characteristics
Low Supply-Current Drain . . . 0.6 mA Typ
(per amplifier)
Low Input Offset Voltage
Low Input Offset Current
Class AB Output Stage
Input/Output Overload Protection
Designed to Be Interchangeable With
Industry Standard LM148, LM248, and
LM348
description/ordering information
The LM148, LM248, and LM348 are quadruple,
independent, high-gain, internally compensated
operational amplifiers designed to have operating
characteristics similar to the ?A741. These
amplifiers exhibit low supply-current drain and
input bias and offset currents that are much less
than those of the ?A741.
LM348N
LM148, LM248, and LM348 are quadruple, independent, high-gain, internally compensated operational amplifiers designed to have operating characteristics similar to the ?A741. These amplifiers exhibit low supply-current drain and input bias and offset currents that are much less than those of the ?A741.
- Manufacturer:Texas Instruments
- Manufacturer Part Number: LM348N
- Description: IC OPAMP GP 4 CIRCUIT 14DIP
- Detailed Description: General Purpose Amplifier 4 Circuit 14-PDIP
LM3578AN
Inverting and Non-Inverting Feedback Inputs
easily be set up for such DC-to-DC voltage
? 1.0V Reference at Inputs conversion circuits as the buck, boost, and inverting
? Operates from Supply Voltages of 2V to 40V configurations. The LM2578A features a unique
? Output Current up to 750 mA, Saturation Less comparator input stage which not only has separate
pins for both the inverting and non-inverting inputs, than 0.9V
but also provides an internal 1.0V reference to each
? Current Limit and Thermal Shut Down input, thereby simplifying circuit design and p.c. board
? Duty Cycle up to 90%
LM358 | LM358 IC – Low Power Dual Op
LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.
LM358 | LM358 IC - Low Power Dual Op -?DataSheet?
LM358D
The LM358B and LM2904B devices are the
next-generation versions of the industry-standard
operational amplifiers (op amps) LM358 and LM2904,
which include two high-voltage (36 V) op amps.
These devices provide outstanding value for costsensitive applications, with features including low
offset (300 ?V, typical), common-mode input range to
ground, and high differential input voltage capability.
The LM358B and LM2904B op amps simplify circuit
design with enhanced features such as unity-gain
stability, lower offset voltage maximum of 3 mV (2 mV
maximum for LM358BA and LM2904BA), and lower
quiescent current of 300 ?A per amplifier (typical).
High ESD (2 kV, HBM) and integrated EMI and RF
filters enable the LM358B and LM2904B devices to be
used in the most rugged, environmentally challenging
applications.
The LM358B and LM2904B amplifiers are available
in micro-sized packaging, such as the SOT23-8, as
well as industry standard packages including SOIC,
TSSOP, and VSSOP
LM358P
The LM358B and LM2904B devices are the
next-generation versions of the industry-standard
operational amplifiers (op amps) LM358 and LM2904,
which include two high-voltage (36 V) op amps.
These devices provide outstanding value for costsensitive applications, with features including low
offset (300 ?V, typical), common-mode input range to
ground, and high differential input voltage capability.
The LM358B and LM2904B op amps simplify circuit
design with enhanced features such as unity-gain
stability, lower offset voltage maximum of 3 mV (2 mV
maximum for LM358BA and LM2904BA), and lower
quiescent current of 300 ?A per amplifier (typical).
High ESD (2 kV, HBM) and integrated EMI and RF
filters enable the LM358B and LM2904B devices to be
used in the most rugged, environmentally challenging
applications.
The LM358B and LM2904B amplifiers are available
in micro-sized packaging, such as the SOT23-8, as
well as industry standard packages including SOIC,
TSSOP, and VSSOP
LM35DZ/NOPB
LM35DZ/NOPB - LM35 Precision Temperature Sensor
The LM35 series are precision integrated-circuit temperature devices with an output voltage linearly proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling.
LM361H
Independent strobes
input, complementary TTL output voltage comparator
? Ensured high speed: 20 ns max with improved characteristics over the SE529/NE529
? Tight delay matching on both outputs for which it is a pin-for-pin replacement. The device
? Complementary TTL outputs has been optimized for greater speed performance
and lower input offset voltage. Typically delay varies
? Operates from op amp supplies: ?15V only 3 ns for over-drive variations of 5 mV to 500 mV.
? Low speed variation with overdrive variation It may be operated from op amp supplies (?15V).
? Low input offset voltage Complementary outputs having maximum skew are
? Versatile supply voltage range
