ADC0808 8-Bit A/D Converter with 8-Channel Multiplexer IC DIP-28 Package
₹135.00
The ADC0808 data acquisition component is a monolithic CMOS device with an 8-bit analog-to-digital converter, 8-channel multiplexer and microprocessor compatible control logic.
The ADC0808 data acquisition component is a monolithic CMOS device with an 8-bit analog-to-digital converter, 8-channel multiplexer and microprocessor compatible control logic. The 8-bit A/D converter uses successive approximation as the conversion technique. The converter features a high impedance chopper stabilized comparator, a 256R voltage divider with analog switch tree and a successive approximation register. The 8-channel multiplexer can directly access any of 8-single-ended analog signals.
The device eliminates the need for external zero and full-scale adjustments. Easy interfacing to microprocessors is provided by the latched and decoded multiplexer address inputs and latched TTL TRI-STATE outputs.
The design of the ADC0808 has been optimized by incorporating the most desirable aspects of several A/D conversion techniques. The ADC0808 offers high speed, high accuracy, minimal temperature dependence, excellent long-term accuracy and repeat-ability, and consumes minimal power. These features make this device ideally suited to applications from process and machine control to consumer and automotive applications.
Features:-
Easy Interface to All Microprocessors
Operates Ratio-metrically or with 5 VDC or Analog Span Adjusted Voltage Reference
No Zero or Full-Scale Adjust Required
8-Channel Multiplexer with Address Logic
0V to VCC Input Range
Outputs meet TTL Voltage Level Specifications
ADC0808 Equivalent to MM74C949
Specifications:-
Parameters Specification
Part number ADC0808-N
Resolution (Bits) 8
Sample rate (Max) (kSPS) 10
Number of input channels 8
Interface Parallel
Operating temperature range ( C ) -40 to 85
Package Group PLCC | 28
Power consumption (Typ) (mW) 15
Package size: mm2:W x L (PKG) 28PLCC: 155 mm2: 12.45 x 12.45 (PLCC | 28)
Architecture SAR
Input type Single-Ended
Multi-channel configuration Multiplexed
Input range (Max) (V) 6
Input range (Min) (V) 0
Analog voltage AVDD (Min) (V) 4.5
Analog voltage AVDD (Max) (V) 6
Digital supply (Min) (V) 4.5
Digital supply (Max) (V) 6
INL (Max) ( /-LSB) 1.25
Rating See Data Sheet
Related Document:-
ADC0808 IC Datasheet
* Product Images are shown for illustrative purposes only and may differ from actual product.


MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisqueĀ vestibulum amet elit ut volutpat.
Related products
AD7730BNZ

ADS1230IPWR – 20 Bit Analog to Digital Converter For Bridge Sensors
ADS1230IPWR - 20-Bit, 80SPS, 1-Ch Delta-Sigma ADC for Resistive Bridge Sensors & Weigh Scales
The ADS1230 is a 20-bit precision analog-to-digital converter (ADC). The ADS1230 provides a full front-end system for bridge application areas such as weigh scales, strain gauges, and pressure sensors thanks to an inbuilt low-noise programmable gain amplifier (PGA), onboard oscillator, and precision 20-bit delta-sigma ADC. The low-noise PGA has a gain of 64 or 128, allowing for a full-scale differential input of 39mV or 19.5mV. The delta-sigma ADC has an effective resolution of 20 bits and is made up of a 3rd order modulator and a 4th order digital filter. APPLICATIONS- Weigh Scales
- Strain Gauges
- Pressure Sensors
- Industrial Process Control