1.5KE51CA (pack of 10)

FEATURES:

– **Peak Pulse Capability:** Capable of handling peak pulses up to 1500W with a 10/1000μs waveform, and operates with a low duty cycle of 0.01%.
– **Package:** Housed in a DO-201 package with a glass passivated chip junction.
– **Response Time:** Typically responds in less than 1.0ps from 0 Volts to the minimum Breakdown Voltage (BV min).
– **Clamping Capability:** Provides excellent clamping to protect against transient voltage spikes.
– **Failure Mode:** Typically fails short when exposed to voltage or current levels exceeding specifications.
– **Whisker Test:** Complies with JEDEC JESD201A standards (table 4a and 4c), ensuring reliability by testing for metal whiskers.
– **ESD Protection:** Designed to handle electrostatic discharge (ESD) up to 30kV (Air and Contact discharge) as per IEC 61000-4-2 standards.
– **EFT Protection:** Provides protection against electrical fast transients (EFT) in accordance with IEC 61000-4-4.
– **Surge Resistance:** Features low incremental surge resistance.
– **Leakage Current:** Typical leakage current (IR) is less than 1μA when the minimum Breakdown Voltage (VBR min) exceeds 12V.
– **High Temperature Endurance:** Can withstand temperatures up to 260°C for 30 seconds during reflow soldering, with specific lead length and tension requirements.
– **Breakdown Voltage Variation:** Breakdown Voltage (VBR) varies with temperature (TJ) based on a temperature coefficient (αT) of approximately 0.1%.
– **Packaging and Compliance:** Comes in a plastic package rated V-0 for flammability per Underwriters Laboratories, with a matte tin lead-free plated finish. It is also halogen-free and RoHS compliant.
– **Pb-free E3:** Indicates compliance with Pb-free standards, where both second-level interconnects and terminal finish materials are tin (Sn) as per IPC/JEDEC J-STD-609A.01.

These features collectively make the TVS diode well-suited for protecting sensitive electronic components from voltage transients and ensuring reliability under various environmental conditions while meeting stringent safety and environmental standards.