LM2902D
This circuit consists of four independent, highgain operational amplifiers (op amps) which
employ internal frequency compensation and are
specifically designed for automotive and
industrial control systems.
The device operates from a single power supply
over a wide range of voltages. Operation from
split power supplies is also possible and the lowpower supply current drain is independent from
the power supply voltage magnitude.
LM2902M
The LM124-N series consists of four independent,
high-gain, internally frequency compensated
operational amplifiers designed to operate from a
single power supply over a wide range of voltages.
Operation from split-power supplies is also possible
and the low-power supply current drain is
independent of the magnitude of the power supply
voltage.
Application areas include transducer amplifiers, DC
gain blocks and all the conventional op amp circuits
which now can be more easily implemented in single
power supply systems. For example, the LM124-N
series can directly operate off of the standard 5-V
power supply voltage which is used in digital systems
and easily provides the required interface electronics
without requiring the additional ?15 V power supplies
LM2917M-8
The LM2907 and LM2917 devices are monolithic
frequency-to-voltage converters with a high gain op
amp designed to operate a relay, lamp, or other load
when the input frequency reaches or exceeds a
selected rate. The tachometer uses a charge pump
technique and offers frequency doubling for lowripple, full-input protection in two versions (8-pin
LM2907 and LM2917), and its output swings to
ground for a zero frequency input.
The op amp is fully compatible with the tachometer
and has a floating transistor as its output. This feature
allows either a ground or supply referred load of up to
50 mA. The collector may be taken above VCC up to a
maximum VCE of 28 V.
LM293H
The LM193-N series consists of two independent
precision voltage comparators with an offset voltage
specification as low as 2.0 mV max for two
comparators which were designed specifically to
operate from a single power supply over a wide range
of voltages. Operation from split power supplies is
also possible and the low power supply current drain
is independent of the magnitude of the power supply
voltage. These comparators also have a unique
characteristic in that the input common-mode voltage
range includes ground, even though operated from a
single power supply voltage.
LM2940S-5.0 P+
The LM2940-N and LM2940C positive voltage ? Input Voltage Range = 6 V to 26 V
regulators feature the ability to source 1 A of output
? Dropout Voltage Typically 0.5 V at IOUT = 1 A current with a dropout voltage of typically 0.5 V and a
? Output Current in Excess of 1 A maximum of 1 V over the entire temperature range.
? Output Voltage Trimmed Before Assembly Furthermore, a quiescent current reduction circuit has
been included which reduces the ground current
? Reverse Battery Protection when the differential between the input voltage and
? Internal Short Circuit Current Limit the output voltage exceeds approximately 3 V. The
? Mirror Image Insertion Protection quiescent current with 1 A of output current and an
input-output differential of 5 V is therefore only 30 ? P
Product Enhancement Tested
mA. Higher quiescent currents only exist when the
regulator is in the dropout mode
LM2941CT/NOPB
The LM2941 positive voltage regulator features the ? Operating VIN Range: 6 V to 26 V
ability to source 1 A of output current with a typical
? Output Voltage Adjustable From 5 V to 20 V dropout voltage of 0.5 V and a maximum of 1 V over
? Dropout Voltage Typically 0.5 V at IOUT = 1 A the entire temperature range. Furthermore, a
? Output Current in Excess of 1 A quiescent current reduction circuit has been included
which reduces the ground pin current when the
? Trimmed Reference Voltage differential between the input voltage and the output
? Reverse Battery Protection voltage exceeds approximately 3 V. The quiescent
? Internal Short-Circuit Current Limit current with 1 A of output current and an input-output
differential of 5 V is therefore only 30 mA. Higher ? Mirror Image Insertion Protection
quiescent currents only exist when the regulator is in
? P
Product Enhancement Tested the dropout mode
LM2990T-5.0 P+
The LM2990 is a three-terminal, low-dropout, 1-A
negative voltage regulator available with fixed output
? Fixed Output Voltages: ?5 V, ?5.2 V, ?12 V, and voltages of ?5 V, ?5.2 V, ?12 V, and ?15 V.
?15 V
The LM2990 uses circuit design techniques to ? 5% Output Accuracy over Entire Operating Range provide low-dropout and low-quiescent current. The
? Output Current in Excess of 1 A dropout voltage at 1-A load current is typically 0.6 V
? Dropout Voltage Typically 0.6 V at 1-A Load and an ensured worst-case maximum of 1 V over the
entire operating temperature range. The quiescent ? Low Quiescent Current
current is typically 1 mA with 1-A load current and an
? Internal Short-Circuit Current Limit input-output voltage differential greater than 3 V. A
? Internal Thermal Shutdown with Hysteresis unique circuit design of the internal bias supply limits
? Functional Complement to the LM2940 Series the quiescent current to only 9 mA (typical) when the
regulator is in the dropout mode (VOUT ? VIN ? 3 V).
Output voltage accuracy is ensured to ?5% over load 2 Applications
and temperature extremes
LM2991S
The LM2991 is short-circuit proof, and thermal
shutdown includes hysteresis to enhance the
reliability of the device when inadvertently overloaded
for extended periods. The LM2991 is available in 5-
lead TO-220 and DDPAK/TO-263 packages and is
rated for operation over the automotive temperature
range of ?40?C to 125?C. Mil-Aero versions are also
available
LM2991T P+
The LM2991 uses new circuit design techniques to
provide a low dropout voltage, low quiescent current
and low temperature coefficient precision reference.
The dropout voltage at 1-A load current is typically
0.6 V and an ensured worst-case maximum of 1 V
over the entire operating temperature range. The
quiescent current is typically 1 mA with a 1-A load
current and an input-output voltage differential greater
than 3 V. A unique circuit design of the internal bias
supply limits the quiescent current to only 9 mA
(typical) when the regulator is in the dropout mode
(VOUT ? VIN ? 3 V).
The LM2991 is short-circuit proof, and thermal
shutdown includes hysteresis to enhance the
reliability of the device when inadvertently overloaded
for extended periods. The LM2991 is available in 5-
lead TO-220 and DDPAK/TO-263 packages and is
rated for operation over the automotive temperature
range of ?40?C to 125?C. Mil-Aero versions are also
available.
