DS8921M
12-ns Typical Propagation Delay
differential line driver and receiver pairs designed
? Output Skew: 0.5 ns Typical specifically for applications meeting the ST506,
? Meets the Requirements of EIA Standard RS-422 ST412, and ESDI disk drive standards. In addition,
? Complementary Driver Outputs these devices meet the requirements of the EIA
standard RS-422.
? High Differential or Common-Mode Input Voltage
Ranges of ?7 V The DS8921x receivers offer an input sensitivity of
200 mV over a ?7 V common mode operating range. ? ?0.2 V Receiver Sensitivity Over the Input Voltage
Hysteresis is incorporated (typically 70 mV) to Range improve noise margin for slowly changing input
? Receiver Input Hysteresis: 70 mV Typical waveforms.
? DS8921AT Industrial Temperature Operation: The DS8921x drivers are designed to provide (?40?C to 85?C)
DS90C032TM
The DS90C032 is a quad CMOS differential line ? Single Event Latchup (SEL) Immune 120 MeVreceiver designed for applications requiring ultra low cm2
/mg
power dissipation and high data rates.
? High Impedance LVDS Inputs with Power-Off.
The DS90C032 accepts low voltage differential input ? Accepts Small Swing (330 mV) Differential signals and translates them to CMOS (TTL Signal Levels compatible) output levels. The receiver supports a
? Low Power Dissipation TRI-STATE function that may be used to multiplex
? Low Differential Skew outputs. The receiver also supports OPEN Failsafe
and terminated (100?) input Failsafe with the addition ? Low Chip to Chip Skew of external failsafe biasing. Receiver output will be
? Pin Compatible with DS26C32A HIGH for both Failsafe conditions.
DS90UB913ATRTV-Q1
Features of DS90UB913A
? Automotive applications approved for use with AEC-Q100
- Device temperature grade 2: operating temperature range of -40?C to +105?C
? Support for input pixel clocks between 25 and 100 MHz
? Programmable data payloads include 10-bit and 12-bit payloads with a maximum speed of 100 MHz and 75 MHz, respectively.
? 400 kHz I2C-compatible continuous low latency bidirectional control interface channel
? An embedded clock that supports AC-coupled interconnects by using DC-balanced coding.
? Capable of driving up to 20m of shielded twisted-pair cables or 15m of coaxial cable.
? Power-Over-Coaxial (PoC) functioning that is reliable
? 4 Specific general-purpose input/output devices
? Compatible parallel inputs on serializer?at 1.8, 2.8, or 3.3 volts
? A single 1.8 V power supply
? Compliant with ISO 10605 and IEC 61000-4-2 ESD
? Tiny (5 mm by 5 mm) serializer footprint
Applications? of DS90UB913A
? Automotive
? Surround View Systems (SVS)
? Front Cameras (FC)
? Rear View Cameras (RVC)
? Sensor fusion
? Driver Monitor Cameras (DMS)
? Remote satellite RADAR, ToF, and LIDAR sensors
? Security and surveillance
? Machine vision applications
DSEI30-06A
Planar passivated chips
? Low leakage current
? Very short recovery time
? Improved thermal behaviour
? Very low Irm-values
? Very soft recovery behaviour
? Avalanche voltage rated for reliable operation
? Soft reverse recovery for low EMI/RFI
? Low Irm reduces:
- Power dissipation within the diode
- Turn-on loss in the commutating switch
