PIC18F4520 Microcontroller
₹334.00
The PIC18F4520 is a 28/40/44-Pin, High-Performance, Enhanced Flash, USB Microcontrollers with nanoWatt Technology. The following are the features:-
• High-Current Sink/Source: 25 mA/25 mA
• Three External Interrupts
• Four Timer modules (Timer0 to Timer3)
• Up to 2 Capture/Compare/PWM (CCP) modules:
– Capture is 16-bit, max. resolution 5.2 ns (TCY/16)
– Compare is 16-bit, max. resolution 83.3 ns (TCY)
– PWM output: PWM resolution is 1 to 10-bit
• Enhanced Capture/Compare/PWM (ECCP) module:
– Multiple output modes
– Selectable polarity
– Programmable dead time
– Auto-shutdown and auto-restart
1000 in stock (can be backordered)
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
PIC16F887-I/PT
The PIC16F882/883/884/886/887 devices include a 13-bit program counter that can address memory regions for program that are 2K x 14 (0000h-07FFh) for the PIC16F882, 4K x 14 (0000h-0FFFh) for the PIC16F883/PIC16F884, and 8K x 14 (0000h-1FFFh) for the PIC16F886/PIC16F887. If you reach a location that is larger than these parameters, the original 8K x 14 space will wrap around. The reset vector is at 0000h, whereas the interrupt vector is at 0004h. The PIC16F87X MCUs each include three memory blocks. Program memory and data memory are connected by separate buses to enable concurrent access. The PIC16F87X MCUs each include three memory blocks. Program memory and data memory are connected by separate buses to enable concurrent access.
PIC18F2525 Microcontroller
The PIC18F2525 is a 28/40/44-Pin Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology. The following are the features:-
• Master Synchronous Serial Port (MSSP) module Supporting 3-Wire SPI (all 4 modes) and I2C™ Master and Slave modes
• Enhanced Addressable USART module:
- Supports RS-485, RS-232 and LIN/J2602
- RS-232 operation using internal oscillator block (no external crystal required)
- Auto-wake-up on Start bit
- Auto-Baud Detect
• 10-Bit, up to 13-Channel Analog-to-Digital (A/D) Converter module: - Auto-acquisition capability - Conversion available during Sleep
• Dual Analog Comparators with Input Multiplexing
• Programmable 16-Level High/Low-Voltage Detection (HLVD) module:
- Supports interrupt on High/Low-Voltage Detection
PIC18F2550 Microcontroller
The PIC18F2550 is a 28/40/44-Pin, High-Performance, Enhanced Flash, USB Microcontrollers with nanoWatt Technology. The following are the features:-
• High-Current Sink/Source: 25 mA/25 mA
• Three External Interrupts
• Four Timer modules (Timer0 to Timer3)
• Up to 2 Capture/Compare/PWM (CCP) modules:
- Capture is 16-bit, max. resolution 5.2 ns (TCY/16)
- Compare is 16-bit, max. resolution 83.3 ns (TCY)
- PWM output: PWM resolution is 1 to 10-bit
• Enhanced Capture/Compare/PWM (ECCP) module:
- Multiple output modes
- Selectable polarity
- Programmable dead time
- Auto-shutdown and auto-restart
71M6513H-IGT/F
Features
Line Frequency Range of 40-70Hz with the Same Calibration
7° Phase Compensation
RAM and RTC Battery Backup
22mW at 3.3V, backup power of 7.2W
Optional Flash Memory with Security
8-Bit MPU (80515)—One Clock Cycle for Each Instruction
LCD (168 Pixels) Driver
SSI Serial Output at High Speed
Time-of-Use Functions Using RTC
Hardware Timer Watchdog
Up to 22 General-Purpose I/O Pins are available.
64KB Flash and 7KB RAM
There are two UARTs for IR and AMR.
LQFP 100-Pin Package
PIC12F508 Microcontroller
The PIC12F508 from Microchip Technology is low-cost, high-performance, 8-bit, fully-static, Flash-based CMOS microcontroller. They employ a RISC architecture with only 33 single-word/single-cycle instructions. All instructions are single cycle (200 μs) except for program branches, which take two cycles. The PIC12F508 device deliver performance an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.
The PIC12F508 microcontroller is equipped with special features that reduce system cost and power requirements. The Power-on Reset (POR) and Device Reset Timer (DRT) eliminate the need for external Reset circuitry. There are four oscillator configurations to choose from, including INTRC Internal Oscillator mode and the power-saving LP (Low-Power) Oscillator mode. Power-Saving Sleep mode, Watchdog Timer and code protection features improve system cost, power and reliability.
PIC18F452 Microcontroller
The PIC18F452 is a 28/40-pin High Performance, Enhanced FLASH Microcontrollers with 10-Bit A/D. The following are the features:-
• High current sink/source 25 mA/25 mA
• Three external interrupt pins
• Timer0 module: 8-bit/16-bit timer/counter with 8-bit programmable prescaler
• Timer1 module: 16-bit timer/counter
• Timer2 module: 8-bit timer/counter with 8-bit period register (time base for PWM)
• Timer3 module: 16-bit timer/counter
• Secondary oscillator clock option – Timer1/Timer3
PIC18F2620 Microcontroller
The PIC18F2620 is a 28/40/44-Pin Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology. The following are the features:-
• Master Synchronous Serial Port supports SPI ™ and I2C™ Master and Slave Mode
• EUSART module including LIN bus support
• Four Timer Modules
• Up to 2 PWM outputs
• Up to 2 Capture / Compare
PIC16F88 Microcontroller
The PIC16F877A is a18/20/28-Pin Enhanced Flash MCUs with nanoWatt Technology. The following are the features:-
• Capture, Compare, PWM (CCP) module:
- Capture is 16-bit, max. resolution is 12.5 ns
- Compare is 16-bit, max. resolution is 200 ns
- PWM max. resolution is 10-bit
• 10-bit, 7-channel Analog-to-Digital Converter
• Synchronous Serial Port (SSP) with SPI (Master/Slave) and I2C™ (Slave)
• Addressable Universal Synchronous Asynchronous Receiver Transmitter (AUSART/SCI) with 9-bit address detection: - RS-232 operation using internal oscillator (no external crystal required)
Reviews
There are no reviews yet.