AD620 Amplifier IC
AD620 Amplifier IC
AD620 Amplifier IC
AD620 Amplifier IC
Click to enlarge
AD620 Amplifier IC
AD620 Amplifier IC
AD620 Amplifier IC
AD620 Amplifier IC
SA150CA ₹10.00
Back to products
AD623 Instrumentation Amplifier IC DIP-8 ₹365.00

AD620 Amplifier IC DIP-8 (Low Power)

₹270.00

AD620 Amplifier IC is low-cost, high-accuracy amplifiers that require only one external resistor to set gains of 1 to 10,000. These amplifiers feature 8-lead SOIC and DIP packaging that is smaller than discrete designs. The AD620 instrumentation amplifiers offer lower power and high accuracy of 40ppm (maximum) nonlinearity. In addition to this, these amplifiers also provide a low offset voltage of 50?V (maximum) and an offset drift of 0.6?V/?C (maximum). The low input bias current of 1nA (maximum) is made possible with the use of Super?eta processing in the input stage. Typical applications include battery-powered, portable, and medical devices.

Related Document:- ?AD602?SMD Data Sheet

 

1100 in stock (can be backordered)

Add to compare
Add to wishlist
SKU: CMOP-0001 Category:
Description

AD620 Amplifier IC?is a low-cost, high-accuracy instrumentation amplifier that requires only one external resistor to set gains of 1 to 10,000. Furthermore, the AD620 features 8-lead SOIC and DIP packaging that is smaller than discrete designs and offers lower power (only 1.3 mA max supply current), making it a good fit for battery-powered, portable (or remote) applications.The AD620 SMD, with its high accuracy of 40 ppm maximum nonlinearity, the low offset voltage of 50 ?V max, and offset drift of 0.6 ?V/?C max, is ideal for use in precision data acquisition systems, such as weigh scales and transducer interfaces. Furthermore, the low noise, low input bias current, and low power of the AD620 SMD make it well suited for medical applications, such as ECG and noninvasive blood pressure monitors. The low input bias current of 1.0 nA max is made possible with the use of Super?eta processing in the input stage. The AD620 SMD works well as a preamplifier due to its low input voltage noise of 9 nV/?Hz at 1 kHz, 0.28 ?V p-p in the 0.1 Hz to 10 Hz band, and 0.1 pA/?Hz input current noise. Also, the AD620 SMD is well suited for multiplexed applications with its settling time of 15 ?s to 0.01%, and its cost is low enough to enable designs with one in-amp per channel.

FEATURES -: AD620 Amplifier IC

Easy to use:

  • Gain set with one external resistor
  • 1 to 10,000 gain range
  • ?2.3V to ?18V wide power supply range
  • Higher performance than 3 op-amp in-amp (IA) designs
  • Available in 8-lead DIP and SOIC packaging
  • 1.3mA maximum supply current

Excellent dc performance (B grade):

  • 50?V (maximum) input offset voltage
  • 0.6?V/?C (maximum) input offset drift
  • 1nA (maximum) input bias current
  • 100dB (minimum) common-mode rejection ratio (G = 10)

Low noise:

  • 9nV/?Hz @ 1kHz input voltage noise
  • 0.28?V p-p noise (0.1Hz to 10Hz)

Excellent ac specifications:

  • 120kHz bandwidth (G = 100)
  • 15?s settling time to 0.01%

APPLICATIONS -: AD620 Amplifier IC

  • Weigh scales
  • ECG and medical instrumentation
  • Transducer interface
  • Data acquisition systems
  • Industrial process controls
  • Battery-powered and portable equipment

Specification:- AD620 Amplifier IC

Parameter Value
Supply Voltage ?18 V
Internal Power Dissipation 650 mW
Input Voltage ?VS
Differential Input Voltage 25 V
Storage Temperature Range ?65?C to +150?C
Lead Temperature DIP 300?C
Output Short-Circuit Duration Indefinite

Related Document:-
?AD602?SMD Data Sheet

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “AD620 Amplifier IC DIP-8 (Low Power)”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Add to compare

INA118 Low Power Instrumentation Amplifier IC DIP-8

₹830.00
The INA118 is a low-power, general-purpose instrumentation amplifier offering excellent accuracy. The versatile, three op amp design and small size make this device an excellent choice for a wide range of applications. Current-feedback input circuitry provides wide bandwidth, even at high gain (70 kHz at G = 100). A single external resistor sets any gain from 1 to 10000. Internal input protection can withstand up to ?40 V without damage. The INA118 is laser-trimmed for low offset voltage (50 ?V), drift (0.5 ?V/?C), and high common-mode rejection (110 dB at G = 1000). The INA118 operates with power supplies as low as ?1.35 V, and quiescent current is only 350 ?A, making this device an excellent choice for battery-operated systems.
Add to wishlist
Add to cart
Quick view
Add to compare

INA122 Single Supply Instrumentation Amplifier IC DIP-8

₹540.00
The INA122 is a precision instrumentation amplifier for accurate, low noise differential signal acquisition. Its two-op-amp design provides excellent performance with very low quiescent current, and is ideal for portable instrumentation and data acquisition systems. The INA122 can be operated with single power supplies from 2.2V to 36V and quiescent current is a mere 60?A. It can also be operated from dual supplies. By utilizing an input level-shift network, input common mode range extends to 0.1V below negative rail (single supply ground).
Add to wishlist
Add to cart
Quick view
Add to compare

INA125 Instrumentation Amplifier with Precision Voltage Reference IC DIP-16

₹510.00
The INA125 is a low power, high accuracy instrumentation amplifier with a precision voltage reference. It provides complete bridge excitation and precision differential-input amplification on a single integrated circuit. A single external resistor sets any gain from 4 to 10,000. The INA125 is laser-trimmed for low offset voltage (250?V), low offset drift (2?V/?C), and high common-mode rejection (100dB at G = 100). It operates on single ( 2.7V to 36V) or dual (?1.35V to ?18V) supplies. The voltage reference is externally adjustable with pinselectable voltages of 2.5V, 5V, or 10V, allowing use with a variety of transducers.
Add to wishlist
Add to cart
Quick view
Add to compare

LF356 JFET Input Op-Amp IC DIP-8

₹35.00
The LF356 device are the first monolithic JFET input operational amplifiers to incorporate well matched, high-voltage JFETs on the same chip with standard bipolar transistors (BI-FET? Technology). These amplifiers feature low input bias and offset currents/low offset voltage and offset voltage drift, coupled with offset adjust, which does not degrade drift or common-mode rejection. The devices are also designed for high slew rate, wide bandwidth, extremely fast settling time, low voltage and current noise and a low 1/f noise corner.
Add to wishlist
Add to cart
Quick view
Add to compare

LF398 Sample and Hold Amplifier IC DIP-8

₹65.00
he LF398 devices are monolithic sample-and-hold circuits that use BI-FET technology to obtain ultrahigh DC accuracy with fast acquisition of signal and low droop rate. Operating as a unity-gain follower, DC gain accuracy is 0.002% typical and acquisition time is as low as 6 ?s to 0.01%. A bipolar input stage is used to achieve low offset voltage and wide bandwidth. Input offset adjust is accomplished with a single pin and does not degrade input offset drift. The wide bandwidth allows the LF398 to be included inside the feedback loop of 1-MHz operational amplifiers without having stability problems. Input impedance of 1010 ? allows high-source impedances to be used without degrading accuracy. P-channel junction FETs are combined with bipolar devices in the output amplifier to give droop rates as low as 5 mV/min with a 1-?F hold capacitor.
Add to wishlist
Add to cart
Quick view
Add to compare

LM311 Voltage Comparator IC DIP-8

₹18.00
The LM311 devices are single high-speed voltage comparators. These devices are designed to operate from a wide range of power supply voltages, including ?15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. These comparators are capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC or VCC?. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.
Add to wishlist
Add to cart
Quick view
LM324IC
Add to compare

LM324 Low Power Quad Op-Amp IC DIP-14

,
₹10.00
The LM324IC series are low?cost, quad operational amplifiers with true differential inputs. They have several distinct advantages over standard operational amplifier types in single supply applications. The quad amplifier can operate at supply voltages as low as 3.0 V or as high as 32 V with quiescent currents about one?fifth of those associated with the MC1741 (on a per amplifier basis). The common-mode input range includes the negative supply, thereby eliminating the necessity for external biasing components in many applications. The output voltage range also includes the negative power supply voltage.
Add to wishlist
Add to cart
Quick view
Add to compare

MC3403 Quad Low-Power Operational Amplifier IC DIP-14

₹52.00
The ?MC3403 are quadruple operational amplifiers similar in performance to the ?A741, but with several distinct advantages. They are designed to operate from a single supply over a range of voltages from 3 V to 36 V. Operation from split supplies also is possible, provided the difference between the two supplies is 3 V to 36 V. The common-mode input range includes the negative supply. Output range is from the negative supply to VCC ? 1.5 V. Quiescent supply currents are less than one-half those of the ?A741. The MC3403 is characterized for operation from 0?C.
Add to wishlist
Add to cart
Quick view