24LC512-I/SN
₹95.00
The 24AA512/24LC512/24FC512 (24XX512*) from Microchip Technology Inc. is a 64K x 8 (512 Kbit) Serial Electrically Erasable PROM that can operate over a wide voltage range (1.7V to 5.5V). It was created for cutting-edge, low-power applications including data collection and personal communications. Additionally, this device has a page write capacity of up to 128 bytes of information. Both random and sequential readings up to the 512K barrier are supported by this device. Up to eight devices can share a bus with functional address lines, providing a maximum address space of 4 Mbit. The common 8-pin plastic DIP, SOIJ, SOIC, TSSOP, DFN, and 14-lead TSSOP packaging are also available for this component. The 8-lead Chip Scale package is another option for the 24AA512.
Features:
? A single supply that operates 24AA512 and 24FC512 devices at 1.7V and 24LC512 devices at 2.5V.
? CMOS Low-Power Technology:
– A average active current of 400 uA
– Typical standby current is 100 nA
? Compatible with 2-Wire Serial Interface and I2CTM
? Up to eight devices can be cascaded
? Noise-cancelling Schmitt Trigger Inputs
? Ground Bounce is eliminated through output slope control.
? Compatibility of 100 kHz and 400 kHz clocks
? Maximum Page Write Time 5 ms.
? Timed Erase/Write Cycle on Your Own
? Page Write Buffer of 128 bytes
Equipment Write-Protect
? >4000V ESD Protection
? Over 1,000,000 Erase/Write Cycles
? 200 years of data retention
? The following packages are available: 8-lead PDIP, SOIJ, SOIC, BTSSOP, DFN, Chip Scale, and 14-lead TSSOP.
? RoHS and Pb-Free Compliant
? Ranges of temperatures
Industrial (I): -40?F to 85?F
Vehicle (E): -40 to 125C
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
24LC256-I/SN
Features of? 24LC256-I/SN
? A single supply for use For? 24LC256-I/SN , it drops to 1.7V, whereas 24LC256 devices rise to 2.5V.
? CMOS Low-Power Technology:
Maximum write current is 3 mA. Maximum standby current is 1 A. (I-temp.)
? I2C Compatible, Two-Wire Serial Interface
? Up to eight devices can be cascaded
? Noise-cancelling Schmitt Trigger Inputs
? Ground Bounce is eliminated through output slope control.
? Compatibility with 100 kHz, 400 kHz, and 1 MHz
? Maximum Page Write Time: 5 ms
? Timed Erase/Write Cycle on Your Own
The 64-Byte Page Write Buffer
Equipment Write-Protect
? >4000V ESD Protection
? Over a Million Eraser/Writer Cycles
? >200 years for data retention
Factory programming is accessible for 24LC256-I/SN
24LC256-I/SN is RoHS conformant
25AA320-I/SN
The Microchip Technology Inc. 25AA320/25LC320/25C320 (25XX320*) serial Electrically Erasable PROMs are 32 Kbit. A basic Serial Peripheral Interface (SPI) compliant serial bus is used to access the memory. A clock input (SCK) is required, as well as separate data in (SI) and data out (SO) lines. A Chip Selection (CS) input controls access to the device. The hold pin allows you to suspend communication with the gadget (HOLD). Transitions on the device's inputs will be ignored while it is stopped, excluding Chip Select, enabling the host to service higher priority interrupts.
Features
? CMOS Low-Power Technology:
- Maximum write current: 3 mA
- Typical read current: 500 A
- Typical standby current: 500 nA
? 4096 x 8 Bit Storage
? 32 bytes each page
? Maximum Write Cycle Time: 5 ms
? Erase and write cycles that are self-timed
? Write Block Protection:
- Protect none, 1/4, 1/2, or the entire array.
? Integrated Write Protection:
- Data protection circuitry that is switched on and off
? Latch for write enable
- A write-protection pin
? Read in Sequence
? High dependability:
- Endurance: 1 million E/W cycles
- Data retention: more than 200 years
- ESD protection: more than 4000V
? PDIP, SOIC, and TSSOP packages with 8 pins
? TSSOP Package with 14 Leads
89E516RD2
The SST89E5xxRD2 and SST89V5xxRD2 are FlashFlex51 family 8-bit microcontroller devices designed and manufactured using SST's unique and proprietary Super Flash CMOS semiconductor manufacturing technology. SST's clients gain significantly from the split-gate device structure and thick-oxide tunnelling injector in terms of cost and reliability. The devices are pin-for-pin compatible with ordinary 8051 microcontroller devices and use the 8051 instruction set. The devices include 16/24/40/72 K Byte of on-chip flash EEPROM programme memory that is divided into two separate programme memory blocks. The primary Block 0 has 8/16/32/64K Bytes of internal programme memory space, whereas the secondary Block 1 has 8K Bytes of internal programme memory space.
The 8-KByte secondary block can be identified to the minimum address point in the 8/16/32/64 K Byte address space, as well as concealed from the programme counter and utilised as an independent EEPROM-like data store. In addition to the on-chip EEPROM programme memory of 16/24/40/72 K Bytes, the devices may address up to 64 K Bytes of external programme memory. In addition to 1024 x 8 bits of on-chip RAM, external RAM of up to 64 K Bytes may be addressed.
AT24CO2
The 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) provided by the AT24C01A/02/04/08A/16A are structured as 128/256/512/1024/2048 words of 8 bits each. The gadget is designed with a variety of industrial and business applications in mind, where low-power and low-voltage functioning are crucial. The AT24C01A/02/04/08A/16A is accessible through a Two-wire serial interface and is offered in compact 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 5-lead SOT23 (AT24C01A/AT24C02/AT24C04), 8-lead TSSOP, and 8-ball dBGA2 packages. There are other variants of the complete series in 2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) voltage ranges.
Features
Low and Standard Voltage Operation: 2.7 (VCC = 2.7 to 5.5 V) and 1.8 (VCC = 1.8 to 5.5 V)
?128 x 8, 256 x 8, 512 x 8, 1024 x 8, or 2048 x 8 internal organisation (16K)
Bidirectional Data Transfer Protocol, Schmidt Trigger, Filtered Inputs for Noise Suppression, Two-wire Serial Interface, and Compatibility at 100 kHz (1.8V) and 400 kHz (2.7V, 5V)
8-byte page (1K, 2K), 16-byte page, Write Protect Pin for Hardware Data Protection (4K, 8K, 16K) Writing Styles
?High-reliability? Endurance: 1 Million Write Cycles? Data Retention: 100 Years ?Partial Page Writes Allowed ?Self-timed Write Cycle (5 ms max)
?Automotive Grade and Lead-free/Halogen-free Devices Available
?5-lead SOT23,8-lead TSSOP,8-lead PDIP,8-lead JEDEC SOIC,8-lead MAP, and 8-ball dBGA2 Packages
?Die Sales: Bumped Wafers, Waffle Packs, and Wafer Forms
AT24CO4
Features
Low and Standard Voltage Operation: 2.7 (VCC = 2.7 to 5.5 V) and 1.8 (VCC = 1.8 to 5.5 V)
?128 x 8, 256 x 8, 512 x 8, 1024 x 8, or 2048 x 8 internal organisation (16K)
Bidirectional Data Transfer Protocol, Schmidt Trigger, Filtered Inputs for Noise Suppression, Two-wire Serial Interface, and Compatibility at 100 kHz (1.8V) and 400 kHz (2.7V, 5V)
8-byte page (1K, 2K), 16-byte page, Write Protect Pin for Hardware Data Protection (4K, 8K, 16K) Writing Styles
?High-reliability? Endurance: 1 Million Write Cycles? Data Retention: 100 Years ?Partial Page Writes Allowed ?Self-timed Write Cycle (5 ms max)
?Automotive Grade and Lead-free/Halogen-free Devices Available
?5-lead SOT23,8-lead TSSOP,8-lead PDIP,8-lead JEDEC SOIC,8-lead MAP, and 8-ball dBGA2 Packages
?Die Sales: Bumped Wafers, Waffle Packs, and Wafer Forms
The 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) provided by the AT24C01A/02/04/08A/16A are structured as 128/256/512/1024/2048 words of 8 bits each. The gadget is designed with a variety of industrial and business applications in mind, where low-power and low-voltage functioning are crucial. The AT24C01A/02/04/08A/16A is accessible through a Two-wire serial interface and is offered in compact 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 5-lead SOT23 (AT24C01A/AT24C02/AT24C04), 8-lead TSSOP, and 8-ball dBGA2 packages. There are other variants of the complete series in 2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) voltage ranges.
AT25640B-SSHL-T
The Serial Electrically-Erasable Programmable Read-Only Memory (EEPROM) on the Atmel? AT25320B/640B has 32,768-/65,536-bits and is divided into 4,096/8,192 words with 8 bits each. The device is prepared for usage in a wide range of industrial and commercial settings where moderate and low-voltage functioning are critical requirements. The 8-lead JEDEC SOIC, 8-lead TSSOP, 8-lead UDFN, 8-lead XDFN, and 8-ball VFBGA packages for the AT25320B/640B are available in compact sizes. A 3-wire interface made up of Serial Data Input (SI), Serial Data Output (SO), and Serial Clock is used to access and enable the AT25320B/640B. (SCK). No further erase cycle is necessary before Write since every programming cycle is fully self-timed. Programming one of the four blocks of write security into the status register activates block write protection. For added data security, separate instructions for programme enable and programme disable are given. The WP pin offers hardware data protection to guard against unintentional write attempts to the status register. Any serial communication can be halted using the HOLD pin without having to restart the serial sequence.
AT89C55WD-24PU – Microchip – 8 Bit MCU, 8051
A CMOS 8-bit microcontroller with 20K bytes of Flash programmable read-only memory and 256 bytes of RAM, the AT89C55WD is a low-power, high-performance device. The product is made using high-density flash storage technology from Atmel and has pinout and an instruction set that comply with industry standards 80C51 and 80C52. An ordinary nonvolatile memory programmer can user programme the programme memory thanks to the on-chip Flash. The Atmel AT89C55WD is a potent microcomputer that offers a very flexible and area of business to many embedded control applications by mixing a flexible 8-bit CPU with Flash on a monolithic chip.
The following features are included as standard with the AT89C55WD: A full-duplex serial port, an on-chip oscillator, clock circuitry, three 16-bit timer/counters, 32 I/O lines, 256 bytes of RAM, 20K bytes of Flash, and a six-vector, two-level interrupt architecture. The AT89C55WD also features two software-selectable power-saving modes and static logic allowing operating down to zero frequency. The CPU is turned off in idle mode, but the RAM, timers and counters, serial port, and interruption system are still operational. The oscillator is frozen in the Power-down Mode, which also disables all other chip operations until the next error detection or device reset. However, the RAM contents are saved.
M25P40-VMN6TPB
Features of M25P40-VMN6TPB?
- ?4 Mbit of Flash memory
- ?2.3 V to 3.6 V single supply voltage
- ?SPI bus compatible serial interface
- ?75 MHz clock rate (maximum)
- ?Page Program (up to 256 bytes) in 0.8 ms (typical)
- ?Sector Erase (512 Kbit) in 0.6 s (typical)
- ?Bulk Erase (4 Mbit) in 4.5 s (typical)
- ?Deep Power-down mode 1 ?A (typical)
- ?Hardware Write Protection: protected area size defined by three non-volatile bits (BP0, BP1 and BP2)
- ?Electronic signatures ? JEDEC standard two-byte signature (2013h) ? Unique ID code (UID) with 16 bytes read only, available upon customer request ? RES instruction, one-byte, signature (12h), for backward compatibility
- ?Packages ? RoHS compliant
- ?Automotive grade parts available
- Memory Size -
- Supply Voltage - Min: 2.3 V
- Supply Voltage - Max: 3.6 V
- Active Read Current - Max: 8 mA
- Interface Type: SPI
- Maximum Clock Frequency: 75 MHz
- Organisation: 512 k x 8
- Data Bus Width: 8 bit
- Timing Type: Synchronous
- Minimum Operating Temperature: - 40 C
- Maximum Operating Temperature: + 85 C
- Packaging: Reel / Cut Tape
- Memory Type: NOR
- Product Type: NOR Flash
- Speed: 75 MHz
Reviews
There are no reviews yet.