PCF85163D
₹60.00
Nearly any Liquid Crystal Display (LCD)1 with modest multiplex rates may be interfaced with the PCF85162 peripheral device. Any static or multiplexed LCD with up to four backplanes and up to 32 segments can have its driving signals generated by this device. For bigger LCD applications, it is simply cascaded. The two-line bidirectional I2 C-bus is used by the PCF85162 for communication with the majority of microcontrollers. A display RAM with auto-incremented addressing, hardware sub addressing, and display memory switching (static and duplex drive modes) all reduce communication overheads.
Features
LCD controller and driver on a single chip
Selectable display bias configuration: static, 12, or 13; Internal LCD bias generation with voltage-follower buffers; Selectable backplane drive configuration: static, 2, 3, or 4 backplane multiplexing; 32 segment drives:
Up to 8 14-segment alphanumeric characters, up to 16 7-segment numeric characters, and up to 128 components of any image
For storing display data, use 32 bits of RAM.
Flexible flashing modes; switching between display memory banks in static and duplex driving modes; and independent supply for LCD and logic voltage
Broad power supply range: 1.8 to 5.5 volts
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisqueĀ vestibulum amet elit ut volutpat.
Related products
MCP23017 16-Bit Input/Output Expander with I2C Interface IC DIP-28 Package
The MCP23017 device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface:?MCP23017 ? I2C interface??The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection.
MT8870
The MT8870D/MT8870D-1 is a comprehensive DTMF receiver that incorporates both the band split filter and the digital decoder features. For high and low group filters, switched capacitor techniques are used; for decoding, digital counting techniques are used to identify and decode all 16 DTMF tone-pairs into a 4-bit code. The on-chip supply of a differential input amplifier, clock oscillator, and latched three-state bus interface reduces the number of external components.
BP3122
The BP3122 is a high precision primary-side feedback and regulation controller for LED lighting that functions in constant current control mode and is designed to work in inductor current discontinuous conduction mode, making it particularly ideal for fly back converters with universal input. The system's output power should be less than 5W.
The BP3122 contains a 650V power MOSFET. The secondary sensing and feedback circuit has been deleted since the adoption of main sense and feedback control technology. The looping compensatory components are likewise deleted while the overall operating conditions remain stable. It employs patent-pending source driver design and demagnetization detecting technology, has a very low operating current, and does not require an extra winding for measuring output current and powering the device. Because of the low component counts
Using the innovative high precise current sensing technology, the BP3122 achieves 5% LED current accuracy as well as good line and load control.
The BP3122 includes several protective features such as LED open/short circuit protection, CS resistor short circuit protection, over-temperature protection, and VCC under voltage protection.
MCP2510 CAN Controller Interface IC DIP-18 Package
The Microchip Technology Inc. MCP2510 is a Full Controller Area Network (CAN) protocol controller implementing CAN specification V2.0 A/B. It supports CAN 1.2, CAN 2.0A, CAN 2.0B Passive, and CAN 2.0B Active versions of the protocol, and is capable of transmitting and receiving standard and extended messages.
Reviews
There are no reviews yet.