Mcp3202-Bi/P
Mcp3202
Click to enlarge
MCP3201-BI/P
MCP3201-BI/P ₹285.00
Back to products
MCP3204-BI/P ₹423.00

MCP3202-BI/P

₹310.00

MCP3202 is a successive approximation 12-bit analog-to-digital (A/D) converter with on-board sample and hold circuitry. The MCP3202 is programmable to provide a single pseudo-differential input pair or dual single-ended inputs. Differential Nonlinearity (DNL) is specified at Ā±1 LSB, and Integral Nonlinearity (INL) is offered in Ā±1 LSB (MCP3202-B) and Ā±2 LSB (MCP3202-C) versions.

Communication with the device is done using a simple serial interface compatible with the SPI protocol. The device is capable of conversion rates of up to 100 ksps at 5V and 50 ksps at 2.7V. The MCP3202 operates over a broad voltage range, 2.7V to 5.5V. Low-current design permits operation with typical standby and active currents of only 500 nA and 375 ĀµA, respectively. The MCP3202 is offered in 8-pin MSOP, PDIP, TSSOP and 150 mil SOIC packages.

Part Number:MCP3202-BI/P
Manufacturer:Microchip Technology
Description:IC ADC 12BIT SAR 8DIP
Detailed Description: 12 Bit Analog to Digital Converter 1, 2 Input 1 SAR 8-PDIP

MCP3202-BI/P Datasheet

210 in stock (can be backordered)

Add to wishlist
SKU: CMM-0006 Categories: ,
Description

Features of MCP3202-BI/P – Analogue to Digital Converter, Dual, 12 bit

  • 12-bit resolution
  • Ā±1 LSB maximum DNL
  • Ā±1 LSB maximum INL (MCP3202-B)
  • Ā±2 LSB maximum INL (MCP3202-C)
  • Analog inputs programmable as single-ended or pseudo-differential pairs
  • On-chip sample and hold
  • SPI Serial Interface (Modes 0,0 and 1,1)
  • Single supply operation: 2.7V-5.5V
  • 100 ksps maximum sampling rate at VDD = 5V
  • 50 ksps maximum sampling rate at VDD = 2.7V
  • Low power CMOS technology
  • 500 nA typical standby current, 5 ĀµA maximum
  • 550 ĀµA maximum active current at 5V
  • Industrial temp range: -40Ā°C to +85Ā°C
  • 8-pin MSOP, PDIP, SOIC and TSSOP packages

Applications of MCP3202-BI/P – Analogue to Digital Converter, Dual, 12 bit

  • Sensor Interface
  • Process Control
  • Data Acquisition
  • Battery Operated Systems
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MCP3202-BI/P”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisqueĀ vestibulum amet elit ut volutpat.

Related products

Compare

MCP3204-BI/P

₹423.00
The Microchip Technology Inc. MCP3204/3208 devices are successive approximation 12-bit Analogto-Digital (A/D) Converters with on-board sample and hold circuitry. The MCP3204 is programmable to provide two pseudo-differential input pairs or four single-ended inputs. The MCP3208 is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential Nonlinearity (DNL) is specified at Ā±1 LSB, while Integral Nonlinearity (INL) is offered in Ā±1 LSB (MCP3204/3208-B) and Ā±2 LSB (MCP3204/3208-C) versions.
Add to wishlist
Add to cart
Quick view
Compare

PIC16F505

₹88.00
1.0 GENERAL DESCRIPTION The PIC16F505 devices from Microchip Technology are low-cost, high-performance, 8-bit, fully-static, Flash-based CMOS microcontrollers. They employ a RISC architecture with only 33 single-word/ single-cycle instructions. All instructions are single cycle (200 Ī¼s) except for program branches, which take two cycles. The PIC16F505 devices deliver performance an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly
Add to wishlist
Add to cart
Quick view
Compare

PIC16C57C 04 I/P

₹270.00
The PIC16C5X from Microchip Technology is a family of low cost, high performance, 8-bit fully static, EPROM/ROM-based CMOS microcontrollers. It employs a RISC architecture with only 33 single word/ single cycle instructions. All instructions are single cycle except for program branches which take two cycles. The PIC16C5X delivers performance in an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical resulting in 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.
Add to wishlist
Add to cart
Quick view
Compare

DCPIC30F2010-30I/SP

₹417.00
ā€¢ Enhanced Flash program memory: - 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical) ā€¢ Data EEPROM memory: - 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical) ā€¢ Self-reprogrammable under software control ā€¢ Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) ā€¢ Flexible Watchdog Timer (WDT) with on-chip low-power RC oscillator for reliable operation ā€¢ Fail-Safe Clock Monitor (FSCM) operation ā€¢ Detects clock failure and switches to on-chip Low-Power RC (LPRC) oscillator ā€¢ Programmable code protection ā€¢ In-Circuit Serial Programmingā„¢ (ICSPā„¢) programming capability ā€¢ Selectable Power Management modes - Sleep, Idle and Alternate Clock modes
Add to wishlist
Add to cart
Quick view
Compare

PIC16C72A-04/SP

₹393.00
The PIC16C62B/72A devices have a 13-bit program counter capable of addressing an 8K x 14 program memory space. Each device has 2K x 14 words of program memory. Accessing a location above 07FFh will cause a wraparound. The reset vector is at 0000h and the interrupt vector is at 0004h.
Add to wishlist
Add to cart
Quick view
Compare

PIC16C710-20I/SP

₹331.00
The PIC16C71X is a family of low-cost, high-performance, CMOS, fully-static, 8-bit microcontrollers with integrated analog-to-digital (A/D) converters, in the PIC16CXX mid-range family. All PIC16/17 microcontrollers employ an advanced RISC architecture.The PIC16CXX microcontroller family has enhanced core features, eight-level deep stack, and multiple internal and external interrupt sources. The separate instruction and data buses of the Harvard architecture allow a 14-bit wide instruction word with the separate 8-bit wide data. The two stage instruction pipeline allows all instructions to execute in a single cycle, except for program branches which require two cycles. A total of 35 instructions (reduced instruction set) are available. Additionally, a large register set gives some of the architectural innovations used to achieve a very high performance.
Add to wishlist
Add to cart
Quick view
Compare

PIC16C745-20I/SP

₹434.00
The PIC16C745/765 devices are low cost, high-performance, CMOS, fully-static, 8-bit microcontrollers in the PIC16CXX mid-range family.
Add to wishlist
Add to cart
Quick view
Compare

MCP602-I/P

₹61.00
ā€¢ Single-Supply: 2.7V to 6.0V ā€¢ Rail-to-Rail Output ā€¢ Input Range Includes Ground ā€¢ Gain Bandwidth Product: 2.8 MHz (typical) ā€¢ Unity-Gain Stable ā€¢ Low Quiescent Current: 230 ĀµA/amplifier (typical) ā€¢ Chip Select (CS): MCP603 only ā€¢ Temperature Ranges: - Industrial: -40Ā°C to 85Ā°C - Extended: -40Ā°C to 125Ā°C ā€¢ Available in Single, Dual, and Quad
Add to wishlist
Add to cart
Quick view