m7 diode (1n4007) Pack of 100

The AP2112 is a guaranteed 600mA (min.) continuous load current, low dropout linear regulator in CMOS technology with enable function. The fixed output voltage options for the AP2112 are 1.2V, 1.8V, 2.5V, 2.6V, or 3.3V. The LDO offers exceptional performance for coping with line and load transients because to its output precision of 1.5 percent and extremely quick loop response. The AP2112 has an auto discharge feature that, when the device is turned off, connects the output to earth through 60 ohms of resistance. The regulator offers SOT25, SOT89-5, and SO-8 packaging and has a low power consumption. Previously known as SOT-23-5, SOT-89-5, and SOIC-8 packages, respectively, they have been renamed to conform to the most recent terminology used by Diodes Incorporated. Features Output voltage precision: 1.5 percent 600 mA is the output current (Min.) Protection Against Foldback Short Current: 50mA Enable the VOUT On/Off Function @IOUT = 600mA Low Dropout Voltage (3.3V): 250mV (Typ.) Excellent Line Regulation: 0.02 percent /V and 0.2 percent /A (Typ.) for the load regulation (Typ.) Low Quiescent Current (Typ.): 55 A; Low Standby Current (Standard): 0.01 A (Typ.) 50VRMS Low Output Noise OTSD Protection; PSRR: 100Hz -65dB, 1kHz -65dB

The 1.5SMC series was intended to safeguard critical electrical items against voltage transients caused by lightning and other transient voltage phenomena Features • 1500W peak pulse power capability at 10/1000s waveform, repetition rate (duty cycles):0.01% • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 1A when VBR min>12V • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 1A when VBR min>12V • For surface mounted applications to optimise board space • Low profile package • Built-in strain relief • Typical failure mode is short from over-specified voltage or current • Whisker test is performed in accordance with JEDEC JESD201A table 4a and 4c • IEC 61000-4-2 ESD 30kV (Air), 30kV (Contact) Applications TVS devices are essential to safeguard I/O interfaces, VCC buses, and other susceptible circuits in telecom, computer, and industrial applications.