L30960-N3400-A400
L30960-N3400-A400
L30960-N3400-A400
Click to enlarge
HVDA551QDRQ1
HVDA551QDRQ1 ₹147.00
Back to products
L30960-N5130-B100
L30960-N5130-B100 ₹6,528.00

L30960-N3400-A400

₹4,352.00

Features of L30960-N3400-A400

  • LTE (20,8,3,7,1); 3G (8,3); and 2G Dual Band PLS8-E
  • PLS8-US: 3G (5,4,2), 2G Quad Band, and LTE (17,5,4,2).
  • LTE (1,3,19); 3G; PLS8-J (1,19)
  • PLS8-X: 3G (5,4,2), 2G Quad Band, and LTE (13,17,5,4,2).
  • LTE PLS8-V: (13,4,2)
  • LTE (2×2 DL-MIMO; FDD 3GPP Release 9)
  • 3GPP Release 8; UMTS/HSPA (FDD); Rx diversity
  • 3GPP Release 6; DARP/SAIC; GSM/GPRS/EDGE
  • SIM Application Toolkit, version 99 of the 3GPP
  • Using AT instructions to control (Hayes, TS 27.007, TS 27.005)
  • Complete GPS/GLONASS integration (Qualcomm gpsOne Gen8A)
  • 3.3 to 4.2 V supply voltage range, especially tuned for low power usage
  • Dimensions are 29 mm by 33 mm by 2,2 mm (PLS8-V/-X: H=2,9 mm).
  • Range of Operation: -40 °C to +85 °C
  • EuP support, RoHS and REACH compliance

Special Features of L30960-N3400-A400

  • Multiple composite modes and a Linux/Mac-compliant mode are supported by the USB interface.
  • USB-based firmware update
  • BIP (Bearer Independent Protocol) (Bearer Independent Protocol)
  • From Rel.3.0 and for PLS8-X /-V, IP services (Client & Server, TCP/IP & UDP, Transparent & Nontransparent) are available.
  • According to 3GPP TS 27.010, a multiplexer
  • Carrier Switching Automatic (PLS8-X)

 

1200 in stock

Add to wishlist
SKU: CMRF-0009 Category:
Description

Description of  L30960-N3400-A400

A practical option for wireless connectivity both now and in the future is provided by the Thales Cinterion PLS8 wireless module.
The L30960-N3400-A400 is designed for high bandwidth computing and is capable of downlink speeds of up to 100 Mbps and uplink speeds of up to 50 Mbps thanks to 3GPP Rel. 9 LTE technology.

It is the perfect answer for industrial gateway routers, video security solutions, medical equipment, and ruggedized mobile computing.The PLS8, together with its variations, the PLS8-E, PLS8-US, PLS8-J, PLS8-X, and PLS8-V, offer Multi Band LTE in addition to seamless fallback to 2G and 3G technologies, providing global coverage and dependability even when roaming across multiple wireless networks.

An modified GPS antenna path prevents blanking for more reliable operation, and two antenna pads offer diversity support for faster data transfer rates. It offers multiple designs through footprint compatibility with Cinterion 3G, CDMA, and advanced LTE modules to protect investment.

With its exclusive LGA footprint, Thales offers the ability to choose the ideal soldering paste and stencil height for each application, resulting in efficient heat dissipation that eliminates warping.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “L30960-N3400-A400”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

L30960-N5130-B100
Compare

L30960-N5130-B100

₹6,528.00
Features  of  L30960-N5130-B100
  • LTE (2x2 DL-MIMO; FDD 3GPP Release 9)
  • 3GPP Release 8; UMTS/HSPA (FDD); Rx diversity
  • 3GPP Release 6; DARP/SAIC; GSM/GPRS/EDGE
  • SIM Application Toolkit, version 99 of the 3GPP
  • Using AT instructions to control (Hayes, TS 27.007, TS 27.005)
  • 3.3 to 4.2 V supply voltage range, especially tuned for low power usage
  • Size: 40, 32, and 2,8 mm
  • Range of Operation Temperature: -40 °C to +95 °
  • Compliant with RoHS, RED, and REACH, EuP assistance
  Special Features L30960-N5130-B100
  • The USB 2.0/3.0 interface provides several composite modes and a mode that is compatible with Linux and Mac.
  • USB-based firmware update
 
Add to wishlist
Add to cart
Quick view
CC2592
Compare

CC2592RGV

₹350.00
Features of CC2592
  • LNA Gain Digitally Controlled via an HGM Terminal  
  • (LNA EN = PA EN = 0) 100 nA in Power Down  
  • Little Transmit Current Use -PAE = 34% at -155 mA at 3 V for +22 dBm  
  • Low Receiving Current Intake -For High-Gain Mode, use -4.0 mA -For Low-Gain Mode, -1.9 mA  
  • T/R Switch and External Antenna Match Included in the 4.7-dB LNA Noise Figure  
  • Conforms to RoHS QFN-16 Package, 4-mm by 4-mm  
  • Operation from 2.0-V to 3.7-V  
  • Operating Range: -40°C to +125°C
  • Texas Instruments' Seamless Interface to 2.4-GHz Low-Power RF Devices  
  • Power Output: +22 dBm  
  • Improved Sensitivity of 3 dB Typically on CC2520, CC253X, and CC85XX  
  • Almost No External Components -Switches that are built-in -Network for Integrated Matching -Balun integrated -Integral Inductors -Integration of PA -LNA integrated
  Applications  of CC2592  
  • Every 2.4-GHz ISM Band Device
  • Gateways for ZigBee and IEEE 802.15.4
  • Sensor Networks, Wireless
  • Consumer Wireless Systems
  • Industrial Wireless Systems
  • Systems for Wireless Audio
  • Metering systems utilizing IEEE 802.15.4 and ZigBee®
Add to wishlist
Add to cart
Quick view
Compare

HT12D Decoder IC

₹37.00
HT12D is a decoder integrated circuit that belongs to 212 series of decoders. This series of decoders are mainly used for remote control system applications, like burglar alarm, car door controller, security system etc. It is mainly provided to interface RF and infrared circuits.  They are paired with 212 series of encoders. The chosen pair of encoder/decoder should have same number of addresses and data format.In simple terms, HT12D converts the serial input into parallel outputs. It decodes the serial addresses and data received by, say, an RF receiver, into parallel data and sends them to output data pins. The serial input data is compared with the local addresses three times continuously. The input data code is decoded when no error or unmatched codes are found. A valid transmission in indicated by a high signal at VT pin. HT12D is capable of decoding 12 bits, of which 8 are address bits and 4 are data bits. The data on 4 bit latch type output pins remain unchanged until new is received.
Add to wishlist
Add to cart
Quick view
SKY13323-378LF
Compare

SKY13323-378LF

₹72.00
Features of SKY13323-378LF
  • Control of positive voltage (0 and 1.8 V to 0 and 5.0 V)
  • The frequency range for broadband is 0.1-3.0 GHz.
  • Very low insertion loss, typically 0.35 dB at 3 GHz
  • High isolation, typical 27 dB @ 3 GHz
  • P1dB = +27 dBm, excellent linearity performance
  • MLPD (6-pin, 1 x 1 mm, MSL1, 260 °C per JEDEC J-STD-020) ultra-compact packaging
Applications of SKY13323-378LF
  • 802.11 b/g WLAN networks
  • Wi-Fi repeaters
  • ISM-band radios
  • Systems for low-power transmission and reception
Add to wishlist
Add to cart
Quick view
Compare

HT12E Encoder IC

₹37.00
HT12E is an encoder integrated circuit of 212 series of encoders. They are paired with 212 series of decoders for use in remote control system applications. It is mainly used in interfacing RF and infrared circuits. The chosen pair of encoder/decoder should have same number of addresses and data format.
Simply put, HT12E converts the parallel inputs into serial output. It encodes the 12 bit parallel data into serial for transmission through an RF transmitter. These 12 bits are divided into 8 address bits and 4 data bits. HT12E has a transmission enable pin which is active low. When a trigger signal is received on TE pin, the programmed addresses/data are transmitted together with the header bits via an RF or an infrared transmission medium. HT12E begins a 4-word transmission cycle upon receipt of a transmission enable. This cycle is repeated as long as TE is kept low. As soon as TE returns to high, the encoder output completes its final cycle and then stops.
Add to wishlist
Add to cart
Quick view
BGU7005
BGU7005
Compare

BGU7005

₹23.00
Benefits and features of BGU7005
  • Covers the entire GNSS L1 range, 1559 to 1610 MHz
  • Noise figure (NF) is equal to 0.85 dB.
  • Increase 16.5 dB
  • A lot of input Pi(1dB), or 1 dB compression point, is 11 dBm.
  • High IP3i out of band of 9 dBm
  • 1.5 to 3.1 volts is the supply voltage.
  • Consumption of current in power-saving mode is 1 A.
  • Optimized performance at 4.5 mA, a low supply current
  • Output matching that is integrated
  • Only needs one supply decoupling capacitor and one input matching inductor.
  • Decoupled DC input and output
  • All pins have ESD protection (HBM > 2 kV).
  • Temperature-stabilized bias included for simple design
  • Small leadless 6-pin package 1.45 mm, 1 mm, and 0.5 mm
  • Transit frequency of 110 GHz using SiGe:C technology
Add to wishlist
Add to cart
Quick view
CC2640F128RSM
Compare

CC2640F128RSM

₹463.00
Application of CC2640F128RSM
  • Building and Home Automation-Appliances That Are Connected -Lights -Locks -The Gateways -Systems for Security
  • Industrial- Supply chain - Manufacturing and Production - Robotics - Asset Management and Tracking - Wireless Display - Replacement of cables – HMI - Access Management
  • Retail-The beacons - Promotion - Price Tags and ESL - Payment and Point of Sale Systems
  • Medical and Health-Temperature gauges - SpO2 - Blood pressure and glucose metres - Weighbridges - Vitals Tracking - Aids to hearing
  • Exercise and Sports-Fitness trackers and activity monitors -Monitors for Heart Rate -Operating Sensors -Bicycle Sensors -Watches for sports - Fitness Gear - Gear for team sports
  • Accessories-Toys -Followers -Tags for bags -Smartwatches
  Features of CC2640F128RSM
  • Microcontroller-Strong ARM® Cortex® -M3 - 142 for EEMBC CoreMark® - Maximum Clock Speed of 48 MHz - 128 KB of programmable in-system flash - Cache: 8KB of SRAM - 20KB of SRAM with ultra-low leakage. - JTAG and 2-Pin cJTAG Debugging - Facilitates Over-The-Air Upgrade (OTA)
  • Sensor Controller with Ultralow Power- Can Operate Independently of the Rest of the System -16-Bit architecture - 2KB of SRAM with extremely minimal leakage for code and data.
  • Peripherals- Any GPIO Can Be Used to Route All Digital Peripheral Pins - Four modules for general-purpose timers. - 200 ksamples/s, 8-Channel Analog MUX, 12-Bit ADC - Comparator for Continuous Time - Ultralow-Power Analog Comparer -Modifiable Current Source - Clock in Real Time (RTC) - Security Module AES-128 -The TRNG (True Random Number Generator) (TRNG) - Depending on the package option, 10, 15, or 31 GPIOs - Eight capacitive-sensing buttons are supported. - Temperature sensor built-in
Add to wishlist
Add to cart
Quick view
SKY13374-397LF
Compare

SKY13374-397LF

₹49.00
Features of SKY13374-397LF 
  • The frequency range for broadband is 300 kHz to 6.0 GHz.
  • Low insertion loss at 1 GHz and 6 GHz: 0.35 dB and 0.8 dB, respectively
  • There is no need for external DC blocking capacitors.
  • 1.65 to 3.0 V (VCTRL), 2.5 to 4.8 V are examples of positive low control voltages (VBATT)
  • QFN (12-pin, 2 x 2 mm) small packaging (MSL1, 260 C per JEDEC J-STD-020)
Applications of SKY13374-397LF 
  • Wireless LANs with dual bands (802.11 a/b/g/n)
  • Switching between diversity antennas
  • WCDMA mobile phones and data cards
Other Specifications 
  • SPDT switch configuration
  • Frequency Minimum: 300 kHz
  • 6 GHz maximum frequency
  • Loss of Insertion: 0.8 dB
  • Type of Off Isolation: 2 dB
  • 40 C for the minimum operating temperature
  • 85 C is the maximum operating temperature.
  • SMD/SMT mounting style
  • Technology: Si
  • Packaging: Reel/ Cut Tape
Add to wishlist
Add to cart
Quick view