Showing 1–12 of 51 results


Basic Information Full bridge drivers, or H-bridges, are what are used in brush motor applications. Each IC has an operating voltage range of 6V to 15V and a maximum output current of 2A. The output stage's MOS transistors enable PWM speed control. Motor driver ICs that have been discontinued can be directly replaced thanks to the inbuilt VREF voltage control mechanism. Low-power consumption designs are made possible by these incredibly efficient H-bridge driver ICs. Features Built-in Selectable Features Cross-Conduction Prevention Circuit, OCP, OVP, TSD, and UVLO Protection Circuits, One Channel or Two Channels Configuration, VREF Voltage Setting Pin Enables PWM Duty Control, and One or Two Channels Configuration.   Key Particulars Maximum Output Current: 0.5A, 1.0A, 2.0A; Output ON-Resistance: 1.5; PWM Input Frequency Range: 20kHz to 100kHz; Standby Current: 0A; Supply Voltage Range: 18V(Max); (Typ) -40°C to 85°C is the operating temperature range. Applications VTR, CD/DVD players, audiovisual gear, optical disc drives, PC add-ons, and OA equipment


The BP3122 is a high precision primary-side feedback and regulation controller for LED lighting that functions in constant current control mode and is designed to work in inductor current discontinuous conduction mode, making it particularly ideal for fly back converters with universal input. The system's output power should be less than 5W. The BP3122 contains a 650V power MOSFET. The secondary sensing and feedback circuit has been deleted since the adoption of main sense and feedback control technology. The looping compensatory components are likewise deleted while the overall operating conditions remain stable. It employs patent-pending source driver design and demagnetization detecting technology, has a very low operating current, and does not require an extra winding for measuring output current and powering the device. Because of the low component counts Using the innovative high precise current sensing technology, the BP3122 achieves 5% LED current accuracy as well as good line and load control. The BP3122 includes several protective features such as LED open/short circuit protection, CS resistor short circuit protection, over-temperature protection, and VCC under voltage protection.

CH340G (SMD SOP-16 Package) USB to Serial TTL Converter IC

CH340 is a series of USB bus adapters, that provides serial, parallel or IrDA interfaces over the USB bus (note: CH340G supports serial interface only). The CH340G integrate circuit provides common MODEM signals to allow adding a UART to a computer or converting existing UART devices to USB interface.

CP2102 IC

CP2102 IC USB to UART Bridge provides a complete plug-and-play interface solution that includes royalty-free drivers. This USB 2.0 compliant device includes 0 digital I/O pins and is available in a 5x5 mm  QFN28 package.

Specifications:-CP2102 IC

Parameter Min Max Unit
Ambient Temperature under Bias TBIAS -55 125 ºC
Storage Temperature TSTG -65 150 ºC
Voltage on VDD with respect to GND VDD -0.3 4.2 V
Maximum Total Current through VDD and GND - 500 mA
Maximum Output Current sunk by RST or any I/O pin - 100 mA

DS75176 RS-422/RS-485 Interface IC DIP-8 Package

The DS75176B is a high speed differential TRI- STATE@bus/line transceiver designed to meet the requirements of EIA standard RS485 with extended common mode range (+12V to ?7V), for multipoint data transmission.

DS8921 Differential Line Driver and Receiver Pair IC DIP-8 Package

The DS8921 device are differential line driver and receiver pairs designed specifically for applications meeting the ST506, ST412, and ESDI disk drive standards. In addition, these devices meet the requirements of the EIA standard RS-422.

Fan7390MX SMD

The FAN7390 is a monolithic high− and low−side gate−drive IC, which can drive high speed MOSFETs and IGBTs that operate up to 600 V. It has a buffered output stage with all NMOS transistors designed for high pulse current driving capability and minimum cross−conduction. ON Semiconductor’s high−voltage process and common−mode noise canceling techniques provide stable operation of the high−side driver under high dv/dt noise circumstances. An advanced level shift circuit offers high−side gate driver operation up to VS = −9.8 V (typical) for VBS = 15 V

FAN7392 High and Low-Side Gate-Drive IC DIP-14 Package

The FAN7392 is a rnonolithic high- and low-sde gate drive IC that can drive high-speed MOSFETs and IGBTs that operate up to +600V. It has a buffered output stage with all NMOS transistors designed for high pulse current driving capability and minimum cross-conduction.

FT232RL (SMD SSOP-28 Package) USB to Serial UART Interface IC

The FT232RL is the latest device to be added to FTDI?s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output and the new FTDIChip-ID? security dongle feature.

FT245RL (SMD SSOP-28 Package) USB To Parallel FIFO Interface IC

The FT245RL is a USB to parallel FIFO interface with the following advanced features:-?Single chip USB to parallel FIFO bidirectional data transfer interface.Entire USB protocol handled on the chip.


Features of HVDA551QDRQ1 • Qualified for Automotive Applications • With the Following Results, AEC-Q100 Qualified:
  • Device Temperature Grade 1: Ambient Operating Temperature: -40°C to +125°C
  • HBM ESD Classification Level of the Device:
  1. For Pins 6 and 7, Level 3B
  2. All Other Pins at Level 3A
  •  CDM ESD Classification Level C6 for Devices
• Meets or exceeds ISO 11898-2 and ISO 11898-5 requirements. • ICT and GIFT compliant • Up to 1 Mbps in data rate • Human-Body Model ESD Protection Up to 12 kV on Bus Pin • Adapting I/O Voltage Level
  • Adaptable I/O Voltage Range (VIO) From 3 V to 5.33 V, HVDA551
• Source of Split Voltage
  • Common-Mode Bus Stabilization (HVDA553)
• Modes of Operation:
  1. Standard Mode
  2. Low Power Standby With RXD Wake-Up Request
• Superior Magnetic Compliance (EMC) • Supports Flexible Data-Rate CAN (FD) • Security
  1. VIO and VCC Under-voltage Protection
  2. Protection against bus faults from -27 to 40 volts
  3. Dominant State Time-Out - TXD
  4. CAN Bus Lockout on RXD Wake-Up Request Stuck Dominant Fault (HVDA551)
  5. Compatible With 5-V Microprocessors Digital Inputs (HVDA553)
  6. Protective Thermal Shutdown
  7. Glitch-Free Power-Up and Power-Down Bus I/O
  8. When unpowered, the bus input impedance is high (No Bus Load)
Applications of HVDA551QDRQ1
  • SAE J2284 High-Speed CAN for Automotive Applications
  • SAE J1939 Standard Data Bus Interface
  • GMW3122 Dual-Wire CAN Physical Layers
  • ISO 11783 Standard Data Bus Interface
  • NMEA 2000 Standard Data Bus Interface