BGU7005

Features of SKY13374-397LF 

• The frequency range for broadband is 300 kHz to 6.0 GHz.
• Low insertion loss at 1 GHz and 6 GHz: 0.35 dB and 0.8 dB, respectively
• There is no need for external DC blocking capacitors.
• 1.65 to 3.0 V (VCTRL), 2.5 to 4.8 V are examples of positive low control voltages (VBATT)
• QFN (12-pin, 2 x 2 mm) small packaging (MSL1, 260 C per JEDEC J-STD-020)

Applications of SKY13374-397LF 

• Wireless LANs with dual bands (802.11 a/b/g/n)
• Switching between diversity antennas
• WCDMA mobile phones and data cards

Other Specifications 

• SPDT switch configuration
• Frequency Minimum: 300 kHz
• 6 GHz maximum frequency
• Loss of Insertion: 0.8 dB
• Type of Off Isolation: 2 dB
• 40 C for the minimum operating temperature
• 85 C is the maximum operating temperature.
• SMD/SMT mounting style
• Technology: Si
• Packaging: Reel/ Cut Tape

Features of CC2592

• LNA Gain Digitally Controlled via an HGM Terminal  
• (LNA EN = PA EN = 0) 100 nA in Power Down  
• Little Transmit Current Use -PAE = 34% at -155 mA at 3 V for +22 dBm  
• Low Receiving Current Intake -For High-Gain Mode, use -4.0 mA -For Low-Gain Mode, -1.9 mA  
• T/R Switch and External Antenna Match Included in the 4.7-dB LNA Noise Figure  
• Conforms to RoHS QFN-16 Package, 4-mm by 4-mm  
• Operation from 2.0-V to 3.7-V  
• Operating Range: -40°C to +125°C
• Texas Instruments' Seamless Interface to 2.4-GHz Low-Power RF Devices  
• Power Output: +22 dBm  
• Improved Sensitivity of 3 dB Typically on CC2520, CC253X, and CC85XX  
• Almost No External Components -Switches that are built-in -Network for Integrated Matching -Balun integrated -Integral Inductors -Integration of PA -LNA integrated

  Applications  of CC2592  

• Every 2.4-GHz ISM Band Device
• Gateways for ZigBee and IEEE 802.15.4
• Sensor Networks, Wireless
• Consumer Wireless Systems
• Industrial Wireless Systems
• Systems for Wireless Audio
• Metering systems utilizing IEEE 802.15.4 and ZigBee®

PN553A1EV/C102Y

HT12D is a decoder integrated circuit that belongs to 212 series of decoders. This series of decoders are mainly used for remote control system applications, like burglar alarm, car door controller, security system etc. It is mainly provided to interface RF and infrared circuits.  They are paired with 212 series of encoders. The chosen pair of encoder/decoder should have same number of addresses and data format.In simple terms, HT12D converts the serial input into parallel outputs. It decodes the serial addresses and data received by, say, an RF receiver, into parallel data and sends them to output data pins. The serial input data is compared with the local addresses three times continuously. The input data code is decoded when no error or unmatched codes are found. A valid transmission in indicated by a high signal at VT pin. HT12D is capable of decoding 12 bits, of which 8 are address bits and 4 are data bits. The data on 4 bit latch type output pins remain unchanged until new is received.